Why Is My Samsung Dishwasher Not Drying The Dishes?

Why Is My Samsung Dishwasher Not Drying The Dishes?
Table of Contents

Advance your knowledge of dishwasher repairs with resources such as
15 Common Samsung Dishwasher Issues and How to Resolve Them
Samsung Dishwasher Not Draining? 7 Ways To Repair & Unclog
Samsung Dishwasher Not Dispensing Soap And How To Fix It

Incorrect Dishwasher Configuration

When dealing with a Samsung dishwasher that isn’t drying dishes properly, consider these steps:

  • Check if the rinse aid dispenser is filled and working correctly. Rinse aid helps with drying by reducing water spots and aiding evaporation.
  • Refill or replace the rinse aid if the dispenser is empty or malfunctioning, following the manufacturer’s instructions.

By ensuring proper rinse aid usage and avoiding overloading, you can improve drying performance in your Samsung dishwasher.

Insufficient Rinse Aid Usage

Inadequate use of rinse aid can hinder the drying effectiveness of a Samsung dishwasher. Here’s how to address it:

  • Ensure the rinse aid dispenser is filled properly to promote better water runoff during the final rinse cycle.
  • Most models have a designated compartment for adding rinse aid near the detergent dispenser.
  • Consult the dishwasher’s manual for locating and filling the rinse aid dispenser, and regularly refill it as needed.
  • Adjust the dosage settings on the dishwasher for optimal performance, balancing between too little and too much rinse aid.
  • Avoid using excessive rinse aid to prevent streaks or cloudy residue on dishes.

Dishwasher Overloading Issues

Overloading your Samsung dishwasher can hinder the drying process, leading to damp dishes. Here’s what to do:

  • Avoid cramming too many dishes into one load, as this restricts airflow.
  • Consult your dishwasher’s manual for recommended loading capacity and arrangement.
  • Ensure dishes are spaced apart for proper air circulation.
  • Don’t stack items too closely together to allow for thorough drying.
  • If overloading persists, check for other underlying issues in sections 8 or 10 of this guide.

By following proper loading techniques and addressing any underlying issues, you can prevent damp dishes in your Samsung dishwasher. Remember, optimal performance also relies on factors like rinse aid usage and regular interior cleaning.

Water Temperature Challenges

Water temperature issues can hinder a Samsung dishwasher’s drying performance. Here’s how to troubleshoot:

  • Check dishwasher settings: Ensure correct drying options like “Heated Dry” or “Air Dry” are selected for optimal heat.
  • Inspect heating element: Malfunctioning heating elements may lead to inadequate water temperature. Refer to the manual for inspection or seek professional help.
  • Address rinse aid dispenser: Problems with rinse aid usage or dispensing can affect washing and drying efficiency. Use appropriate amounts and check for blockages or malfunctions.

By adjusting settings, inspecting critical components, and ensuring proper rinse aid usage, you can effectively tackle drying issues in your Samsung dishwasher.

Malfunctioning Heating Element

A common issue with Samsung dishwashers not drying dishes effectively is a faulty heating element. Here’s what you need to know:

  • Role of Heating Element: The heating element is crucial for raising water and interior temperatures during the drying cycle.
  • Symptoms of Malfunction: Damp or wet dishes after a cycle may indicate a malfunctioning heating element.

Possible Causes:

  • Low Water Temperature: Incoming water below 120°F (49°C) can hinder the element’s efficiency.
  • Overloading: Overstuffing the dishwasher blocks airflow and heat distribution, affecting drying.


  • Check Control Panel: Look for error codes indicating heating element issues.
  • Consult Manual: Use error codes to troubleshoot specific problems following the manufacturer’s instructions.

Maintenance Tips:

  • Clean Regularly: Clear debris from filters, spray arms, and interior to maintain airflow.
  • Inspect Vent and Fan: Ensure proper air circulation by checking for obstructions.

Promptly addressing heating element issues and following maintenance tips can resolve drying problems with Samsung dishwashers.

Clogged Vent or Fan

A common issue with Samsung dishwashers not drying dishes effectively is due to a clogged vent or fan. Here’s what to do:

  • Overloading the dishwasher can restrict airflow, hindering drying.
  • Ensure proper loading according to manufacturer guidelines for adequate air circulation.
  • Check for debris or food particles in the vent or fan area, as they can cause blockages.
  • Disconnect the dishwasher from power before performing any maintenance.
  • Clear any visible obstructions with a soft brush or cloth.

Addressing clogged vents and maintaining the dishwasher properly can ensure consistent drying performance.

Unclean or Greasy Interior

Maintaining a clean interior in your Samsung dishwasher is crucial for efficient drying and spotless dishes. Here’s what you need to do:

  • Clear out food debris from the filter and unclog spray arms regularly.
  • Use warm soapy water and a soft brush to scrub away grease and residue from filter, spray arms, and door gasket.
  • Check for mold or buildup on the door gasket and clean it with a vinegar-water solution.
  • Wipe down interior walls and racks with a damp cloth to remove any remaining residue.
  • Properly load dishes according to manufacturer’s guidelines to ensure optimal water circulation for effective cleaning and drying. Avoid overloading to prevent obstructing water flow.

Technical Glitches and Error Codes

When troubleshooting a Samsung dishwasher for drying issues, technical glitches and error codes are common suspects. Here’s what to do:

  • Unplug the dishwasher and locate the control board, the central unit managing all functions.
  • Check the control board for visible damage or loose connections.
  • Refer to the user manual or online resources for specific error codes related to drying problems.
  • Use tools like multimeters to test components such as thermostats or fan motors for electrical continuity.
  • If no visible damage or specific error codes are found, further diagnosis may be needed.

Inspect the Motherboard or Control Board

When troubleshooting a Samsung dishwasher that isn’t drying dishes, inspecting the motherboard or control board is essential. Here’s how:

  • Gather essential tools like a multimeter for voltage measurements and a service manual for specific instructions.
  • Disconnect the dishwasher from power for safety and locate the motherboard using the manual.
  • Examine the motherboard for visible damage or burnt parts, and check connectors for tightness and integrity.
  • Pay attention to error codes displayed on the control panel, as they may indicate specific drying-related issues.

Additionally, prioritize routine maintenance:

  • Clean around the motherboard regularly to prevent overheating and functionality issues.
  • Call professional help if uncomfortable with DIY tasks for thorough inspection and repair.

By following these steps, you can effectively troubleshoot and resolve drying problems in your Samsung dishwasher.

Routine Maintenance Tips

Routine maintenance is crucial for optimal performance and to prevent drying issues in your Samsung dishwasher. Here’s what you need to do:

  • Clean the interior regularly to remove food particles, soap scum, and grease buildup.
  • Use a soft cloth or sponge soaked in warm soapy water to wipe down walls, racks, and spray arms.
  • Check for clogged nozzles and debris in the filter system, and use a vinegar solution to dissolve stubborn grime.
  • Ensure proper airflow by inspecting and cleaning the vent and fan system.
  • Clear any visible debris or obstructions in both exterior and interior vents using a soft brush or vacuum cleaner attachment.
  • Monitor rinse aid usage to prevent spots or streaks on dishes.
  • Fill the rinse aid dispenser according to manufacturer’s recommendations and adjust the dosage level if necessary.
  • Choose appropriate dishwashing settings based on load size and soil level for optimal drying results.
  • Refer to the user manual for guidance on cycle selection, water temperature, and drying options.
  • Incorporate these maintenance tips into your routine to resolve drying issues and prevent future problems.

Remember, regular maintenance is essential for smooth and efficient operation of your Samsung dishwasher. If encountering specific technical glitches, refer to the manufacturer’s manual or seek professional assistance.

How To Avoid a Samsung Dishwasher From Not Drying the Dishes

To ensure your Samsung dishwasher effectively dries dishes, follow these steps:

  • Check and select the appropriate drying settings, like air dry or heated dry, according to your dishwasher model.
  • Refer to the user manual for specific recommendations on optimal drying performance.
  • Use rinse aid to promote better drying by reducing water droplets’ surface tension during the final rinse cycle.
  • Regularly inspect the rinse aid dispenser for clogs or malfunctions and follow the manufacturer’s instructions for usage.
  • Perform routine maintenance by cleaning the interior, clearing debris from around the heating element, and checking for damage.
  • Address any technical glitches or error codes promptly by consulting the user manual or contacting customer support.

By implementing these measures and staying informed about your dishwasher’s features, you can prevent drying issues and ensure optimal performance.


Dealing with a Samsung dishwasher not effectively drying dishes can be frustrating, but there are several potential solutions to consider. By first ensuring the dishwasher is properly configured and the rinse aid dispenser is being used correctly, users can eliminate these common issues with ease. It is important to avoid overloading the dishwasher, as this can hinder proper drying performance.

By utilizing proper maintenance techniques and addressing potential causes systematically, users can restore their dishwashers’ optimal functionality in no time. So fear not – with patience and persistence, your Samsung dishwasher will soon regain its ability to leave your dishes brilliantly dry after every wash cycle!


Why is my Samsung dishwasher not drying properly?

Improper drying may be due to incorrect settings, insufficient rinse aid, overloading, or water temperature issues. Verify settings, check rinse aid levels, avoid overloading, and ensure adequate water temperature.

How can I address issues with my Samsung dishwasher’s rinse aid dispenser?

Ensure proper administration of rinse aid, confirming levels and dispenser functionality. This helps in optimizing the drying performance of the dishwasher.

What should I do if my Samsung dishwasher is not effectively drying dishes?

Effective drying relies on factors like a functioning heating element, suitable loading, and a clean interior. Inspect and address issues with the heating element, loading capacity, and cleanliness for improved drying results.

How do I troubleshoot technical glitches and error codes in my Samsung dishwasher?

Check for error codes, consult the troubleshooting guide in the user manual, and inspect the motherboard or control board for damage. This helps in identifying and resolving technical issues.

What routine maintenance tips can enhance the drying performance of my Samsung dishwasher?

Follow the manufacturer’s maintenance guidelines, perform periodic check-ups, and keep the dishwasher interior clean. These practices contribute to optimal performance and efficient drying.

Share This Article

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top
Open chat
Scan the code
Get A Pro Chat *LIVE Agent*
Thank you for contacting Get A Pro! In a few words, let us know how we can help you. Please allow us 90 seconds to connect you to our live team member.