Get-A-Pro-Appliance-Repair-Logo-300x80

What To Do If Your Samsung Washer Doesn’t Drain or Spin!

What To Do If Your Samsung Washer Doesn't Drain or Spin!
Table of Contents

Deepen your knowledge of washer repair with insightful articles such as
15 Common Samsung Washer Issues and How to Resolve Them
How To Repair a Samsung Washer That Doesn’t Drain – 7 Solutions
5 Simple Steps to Unlock a Samsung Washer Door or Lid

1. Inspect the Lid Switch

When troubleshooting drainage or spinning issues with your Samsung washer, inspecting the lid switch is crucial. Here’s how:

  1. Open and close the lid, listening for a clicking sound; the absence of this sound may indicate a problem.
  2. Visually inspect the lid switch for damage or wear.
  3. Clean any dirt or debris around the switch with a soft cloth or brush.
  4. If cleaning doesn’t resolve the issue, consider replacing the lid switch.

Additionally:

  • Ensure the washer is unplugged before inspecting or cleaning the switch to avoid electrical hazards.
  • Consult the user manual or seek professional help for replacing the lid switch if necessary. A malfunctioning lid switch can cause various problems with drainage and spinning.

By promptly addressing issues with the lid switch, you can prevent further damage to your washer while maintaining its optimal performance.

2. Evaluate the Control Board

The control board in your Samsung washer oversees crucial functions during the wash cycle. Here’s how to troubleshoot and address potential issues:

  • Inspect for Physical Damage: Check for signs of burning, corrosion, or damage on the Control Board.
  • Contact Professional Assistance: If any issues are detected, it’s best to consult professional Samsung appliance repair services.
  • Check Error Codes: Look for error codes on the washer’s control panel to identify Control Board-related problems.
  • Refer to User Manual: Consult your washer’s manual or online resources for a list of error codes and their meanings.
  • Reset or Recalibrate: Try unplugging the washer for a few minutes to reset or recalibrate the Control Board.

Remember to handle electrical components with care and seek professional help if needed.

3. Test the Belt (if applicable)

When troubleshooting a Samsung washer that won’t drain or spin, examining the belt is crucial:

  • Start by unplugging the machine and accessing its rear panel.
  • Inspect the belt for signs of wear like looseness, fraying, or breakage.
  • If any issues are found, replace the belt following the manufacturer’s instructions.
  • Purchase a compatible replacement belt from a reliable source.
  • Test the tension of the belt by gently pulling on it; there should be some resistance.
  • Adjust tension if needed using the adjustable pulley system, consulting the user manual or a professional for guidance.

Resolving belt issues can often fix spin cycle problems, but if not, further investigation into other components may be necessary.

4. Confirm Proper Installation

Proper installation of a Samsung washer is essential for optimal performance. Here’s how to confirm it:

  • Ensure the washer is placed on a level surface using a spirit level.
  • Check the drain hose for kinks, twists, or obstructions that may hinder water flow.
  • Straighten out any kinks or twists in the hose and clear blockages manually.
  • Verify the power supply is securely connected to the washer to prevent malfunctioning spin cycles.
  • Check for any signs of wear or tear on the wires.

Confirming these installation aspects can help identify issues causing drainage or spinning problems. If problems persist, further troubleshooting may be needed.

5. Check the Drain Pump

When troubleshooting a Samsung washer that won’t drain or spin, checking the drain pump is crucial:

  • Unplug the washer and locate the drain pump, usually behind a small panel near the bottom.
  • Remove any screws or clips securing the panel and clear out debris obstructing the pump’s function.
  • Inspect the pump for damage or wear, such as cracks or broken impellers.
  • If significant damage is found, replace the drain pump with a new one.
  • If no visible issues, refer to the user manual for testing electrical connections and motor with a multimeter.

Some DIY fixes like clearing debris can solve simple issues, but complex problems may need Samsung washing machine repair.

6. Examine the Motor Coupling

If your Samsung washer is experiencing drainage or spinning issues, a faulty motor coupling could be to blame. Here’s how to examine it:

  • Unplug your washer for safety.
  • Remove the access panel at the back of the machine.
  • Inspect the motor coupling for wear, cracks, or breakage.
  • If damaged, consult the user manual for replacement instructions.
  • Carefully replace the coupling, following the manual’s guidelines to avoid further damage.
  • Reassemble the washer and ensure all components are properly installed.

Regularly checking and replacing worn motor couplings can help resolve drainage and spin problems in your Samsung washer.

7. Inspect Drain Hose for Blockages

To troubleshoot drainage and spin cycle issues with your Samsung washer, inspecting the drain hose is crucial. Here’s how:

  • Safety first: Unplug the washer to begin.
  • Locate the drain hose at the back of the machine.
  • Detach it carefully from both ends and visually inspect for blockages.
  • Remove any debris or foreign objects using tweezers or pliers.
  • Feel along the hose for hidden clogs, and use tools like a plumber’s snake if needed.
  • Clean the hose thoroughly and check for wear or leaks.
  • Replace the hose if cracks or leaks are present to prevent future issues.

Regular maintenance of the drain hose ensures proper water flow and efficient washer operation, potentially saving time and money on repairs.

8. Inspect the Drain Filter (if applicable)

Inspecting the drain filter is crucial for troubleshooting drainage issues with your Samsung washer:

  • Locate the drain filter on your washer.
  • Follow the instructions in your Samsung washer manual to access and remove the filter.
  • Check for debris or blockages obstructing water flow.
  • Clean the filter with warm water and a soft brush to remove trapped dirt.
  • Reinsert the filter securely into its housing after cleaning.

9. Contact Expert Samsung Washer Repair

When dealing with drainage or spin cycle issues in your Samsung washer, professional repair may be necessary for efficient resolution. Here’s why:

  • Expertise: Professional technicians have specialized knowledge and skills to diagnose and repair complex washer problems.
  • Access to tools: They use diagnostic tools and genuine replacement parts, speeding up the repair process.
  • Manufacturer certification: Look for technicians certified by Samsung with a good track record in washer repair.
  • Comprehensive understanding: They understand Samsung washer mechanisms and common malfunctions like lid switch or control board failures.
  • Thorough diagnosis: Technicians carefully diagnose issues before suggesting repairs or replacements, addressing problems like belt wear or drain pump issues.

While minor troubleshooting at home is useful, persistent issues may require professional attention for efficient resolution.

Get A Pro offers fast and reliable Samsung washer repairs in Toronto and neighboring cities such as Etobicoke, Oakville, Aurora, and Whitby.

Contact us now at 1-800-498-4490 or fill out our appliance contact form for same-day assistance from our experienced team.

Tips To Prevent Samsung Washer Spinning and Draining Issues

To prevent spinning and draining issues with your Samsung washer, follow these essential tips:

  • Maintain the drain filter: Regularly clean the drain filter to prevent lint, debris, and foreign objects from obstructing water flow.
  • Proper installation: Ensure your washer is installed correctly on a level surface to prevent imbalance during operation.
  • Check drain hose: Make sure the drain hose is properly connected without kinks or blockages.
  • Verify electrical connections: Ensure all electrical connections are secure and there are no loose wires or faulty connections.
  • Consult the fixing manual: Refer to the washer’s manual for guidance on locating and maintaining the drain filter and other troubleshooting tips.

By following these steps, you can reduce the risk of common issues with your Samsung washer’s spinning and draining functions. If problems persist, seek professional assistance for thorough troubleshooting and repair. Regular maintenance can prolong your washer’s lifespan and ensure smooth operation.

Conclusion

Troubleshooting drainage issues in your Samsung washer can be a daunting task, but armed with the right knowledge and understanding of common washing machine problems, you can effectively resolve the issue of a washer that doesn’t drain or spin. Taking the time to maintain the drain filter regularly and ensuring proper installation of the washer is essential in preventing or resolving spin problems. If you encounter a lid switch malfunctioning or a belt that shows signs of wear and tear, refer to your washer’s manual for DIY problem-solving techniques.

While facing a malfunctioning spin cycle or a non-draining Samsung washer may initially seem overwhelming, there are various steps you can take to diagnose and resolve these common issues. With proper troubleshooting techniques and adherence to recommended maintenance practices, you possess the tools necessary to address these challenges effectively.

Maintaining an optimistic outlook while tackling these problems ensures that your laundry routine won’t be disrupted for long. So roll up your sleeves, follow our guide diligently, and regain control over your washing experience!

FAQs

How can I fix a Samsung washer that won’t drain or spin?

Inspect the lid switch, evaluate the control board, test the belt (if applicable), confirm proper installation, check the drain pump, examine the motor coupling, inspect drain hose for blockages, check the drain filter (if applicable), and consider professional repair if needed.

What should I do if the lid switch on my Samsung washer is malfunctioning?

Locate and check the lid switch for functionality. If it’s not working, repair or replace the lid switch to ensure proper operation.

How do I address a Samsung washer with a malfunctioning control board?

Access and inspect the control board. If components are damaged, repair or replace them to restore the control board’s functionality.

Can a worn or broken belt cause a Samsung washer not to spin?

Yes, a worn or broken belt can affect the spin cycle. Locate and inspect the belt, and if it’s worn or broken, replace it with a new one.

What are some preventive tips for avoiding spinning and draining issues in Samsung washers?

Maintain proper washer leveling and installation, regularly inspect and clean components like the drain pump, motor coupling, and drain hose. Follow recommended tips for washer upkeep to prevent issues.

Share This Article

Leave a Comment

Your email address will not be published. Required fields are marked *

FOLLOW US
BOOK SERVICE ONLINE
OTHER POSTS
Scroll to Top
Open chat
1
Scan the code
Get A Pro Chat *LIVE Agent*
Thank you for contacting Get A Pro! In a few words, let us know how we can help you. Please allow us 90 seconds to connect you to our live team member.