14 Common Range and Stove Problems and How To Fix Them

stove, cooktop and range common problems and repair guide and troubleshooting
Table of Contents

For our other stove and cooktop related articles covering error codes and an important question you ask yourself when they break:

Stove, Range and Cooktop Troubleshooting: A Step-by-Step Guide

Common Stove Error Codes and How To Repair Them

Should I Repair or Replace a Broken Stove or Cooktop?

1. Stove Not Heating Up

When faced with a stove that is not heating up, it can be quite frustrating, especially when you have a kitchen full of ingredients waiting to be cooked. However, before panicking and calling a stove repairman right away, there are several troubleshooting steps you can take to identify and potentially resolve the issue.

Firstly, check for any obvious cooktop issues. Ensure that all burners are properly seated in their respective sockets and securely connected.

Sometimes, loose connections can prevent the transfer of heat from the elements to the cookware. Moreover, inspect the electric stove coils for any signs of damage or disconnection.

If you notice any visible issues with the coils, it may be necessary to replace them or repair them if possible. If your stove is an electric model and you’re experiencing issues with only one burner not heating up while others function normally, it is essential to verify if the problem lies with burner calibration.

Some stoves have individual controls for each burner’s temperature settings. Therefore, adjusting this control knob might help resolve the problem.

Pro Tip: Identifying these issues will help you decide whether or not professional assistance is required. Furthermore, make sure to inspect the control knobs on your stove thoroughly.

2. Uneven Heating Across Cooktop

uneven cooking on stove or cooktop

This issue can lead to frustrations in the kitchen, as it can result in food being undercooked or burned. However, understanding the potential causes and implementing appropriate solutions can help restore optimal cooking performance.

One possible cause of uneven heating is burner calibration. Over time, burners may become misaligned or lose their efficiency, leading to variations in flame intensity and heat distribution.

To address this issue, it is advisable to recalibrate the burners periodically. Begin by turning off all burners and allowing them to cool down completely.

Next, remove the grates and lift the cooktop surface to access the burner valves. Adjusting the valves using a screwdriver can help regulate gas flow and ensure an even flame across all burners.

Additionally, cleaning out any debris or residue that may be obstructing proper gas flow is essential for maintaining consistent heat distribution. Furthermore, cookware placement plays a crucial role in achieving uniform heating on a range or stove.

Placing pots and pans directly over the center of each burner allows for maximum contact with heat sources and promotes even cooking. Additionally, choosing cookware with flat bottoms that sit securely on top of the burner grates aids in heat transfer efficiency.

Pro Tip: Avoid using oversized or warped cookware that extends beyond the edges of the burner as this can cause uneven cooking due to inadequate contact with heat sources. By diligently following these tips for combating uneven heating across your cooktop, you can enhance your culinary experience while ensuring that your dishes are cooked to perfection every time.

3. Burners Not Igniting (Gas Stoves)

A common issue that many gas stove owners encounter is when the burners fail to ignite. This can be a frustrating problem, especially when you have a meal to prepare.

However, there are several troubleshooting steps you can take to resolve this issue and get your burners firing up again. Firstly, it’s essential to check that the gas supply to your stove is functioning correctly.

Ensure that the gas valve is turned on and that there are no leaks or interruptions in the gas flow. If you suspect a gas leak, it’s crucial to take immediate action by turning off the gas supply and contacting a professional stove technician for assistance.

If the gas supply is not the issue, then a common reason for ignition failure is food debris or grease buildup around the burner. Over time, these particles can obstruct the flow of gas and prevent ignition.

Using a soft brush or cloth dipped in warm soapy water, gently scrub away any dirt or residue from both the burner and its surrounding area. Be sure not to immerse any electrical components in water during this cleaning process.

Pro Tip: By following these troubleshooting steps, you can often resolve burner ignition issues on your gas stove without the need for professional intervention. However, should the problem persist or if you encounter any other complex technical difficulties, it is advisable to seek the assistance of a qualified stove technician to ensure both your safety and the proper functioning of your appliance.

4. Inconsistent Flame on Gas Stove

To address this issue, it’s important to consider factors such as burner cleanliness, gas supply, and flame adjustment.

One potential cause of an inconsistent flame on a gas stove is dirty or clogged burners. Over time, food spills and grease can accumulate on the burner heads or ports, obstructing the flow of gas and affecting the flame’s appearance and performance.

Another factor that may contribute to an inconsistent flame is improper adjustment of the burner’s air-to-gas ratio. This can occur due to wear over time or accidental bumping during routine cleaning.

To rectify this issue, start by turning off all burners and allowing them to cool down completely. Locate the small holes near the base of each burner head—these are called air adjustment shutters—and adjust them using a screwdriver as needed for proper airflow regulation.

Pro Tip: If your stove doesn’t have adjustable shutters, consult your user manual for alternative methods specific to your model. It is worth noting that if you detect any signs of damage during these troubleshooting steps or if adjustments do not resolve the inconsistent flame issue, it may be best to seek professional assistance from a qualified stove technician who possesses specialized knowledge in range repair.

5. Electric Cooktop Not Working

electric cooktop not working

Firstly, it is important to check if the electric cooktop is receiving power. Start by ensuring that the appliance is properly plugged into a functioning power outlet.

If it is connected to an extension cord or surge protector, try removing them and plugging the cooktop directly into an outlet to rule out any issues with those accessories. Additionally, checking the circuit breaker for any tripped switches related to your cooktop can provide insight into potential electrical problems causing the malfunction.

If power supply isn’t the issue, it’s time to inspect the control knobs on your electric cooktop. Sometimes, these knobs can become loose or worn out over time and may not effectively transmit electrical signals to activate the heating elements.

Ensure that all control knobs are firmly in place and correctly aligned with their respective heating zones on the cooktop surface. If any of them seem damaged or unresponsive upon inspection, consider replacing them with compatible replacements from a reputable supplier.

In some cases, an unresponsive control panel might be at fault for an electric cooktop not working as intended. Start by checking if there are any error codes displayed on the panel or if it appears completely blank.

If so, try resetting the control panel by turning off power supply at the circuit breaker for a few minutes before turning it back on again. This soft reset often resolves minor glitches and restores functionality.

Pro Tip: To avoid potential damage to your electric cooktop and ensure its longevity, adhere to proper maintenance practices such as regular cleaning and avoiding abrasive materials while scrubbing the surface. Additionally, be mindful of cookware placement to prevent overheating and potential damage to the heating elements.

6. Indicator Lights Not Functioning

When faced with indicator light problems, there are a few potential causes and solutions to consider. Firstly, check if the issue lies with the indicator light bulb itself. Over time, these bulbs can burn out and need replacement.

Refer to your appliance’s manual for specific instructions on how to access and replace the bulb safely. Alternatively, if you notice that multiple indicator lights are not functioning, it could indicate an electrical short within the control panel.

In this case, it is advisable to contact a professional stove technician for assistance as dealing with electrical components requires expertise. Another possible cause of non-functioning indicator lights is an unresponsive control panel.

This could be due to a faulty connection between the control knob and the internal circuitry of the range or stove. To troubleshoot this issue, start by cleaning around the control knobs using a mild detergent and ensuring they are not sticking due to food debris or residue buildup.

Pro Tip: By following troubleshooting steps like replacing bulbs or cleaning control knobs thoroughly, you may be able to rectify these problems on your own. However, if you encounter more complex issues like electrical shorts or unresponsive controls panels, it is advisable to seek professional help from a qualified stove technician who can diagnose and repair these problems effectively while ensuring your safety throughout the process

7. Cooktop Overheating

This occurs when there is a fault in the electrical circuitry of the stove, leading to an excessive flow of current and subsequent overheating. To identify if an electrical short is causing your cooktop to overheat, begin by inspecting the power cord and outlet for any visible damage.

If everything appears intact, it may be necessary to call a professional stove technician who can accurately diagnose and repair any internal electrical faults. Another factor contributing to cooktop overheating could be related to a malfunctioning control panel or unresponsive control knobs.

When these components fail to regulate heat properly, it can result in excessive temperatures on the cooktop surface. In such cases, troubleshooting control knobs by cleaning them thoroughly or replacing them altogether may resolve the issue.

Pro Tip: Ensuring that your cookware placement adheres to manufacturer’s recommendations and using pots and pans with flat bottoms aids in even heat distribution across burners, preventing hot spots that could lead to overheating. Addressing cooktop overheating requires a systematic approach involving thorough inspection of both external components like power cords and control panels as well as internal electrical circuitry.

8. Cooktop Surface Scratches or Damage

When dealing with cooktop surface scratches or damage, it is essential to follow a systematic approach to ensure effective restoration. Begin by examining the extent of the damage and determining whether it requires professional intervention or if it can be resolved through DIY methods.

Minor scratches caused by normal wear and tear can often be remedied at home without calling in a professional stove technician. To repair superficial scratches on glass or ceramic cooktops, start by cleaning the affected area using mild soapy water and a non-abrasive sponge.

Gently rub the scratched surface in circular motions to remove any dirt or debris that may have accumulated. Once clean, apply a small amount of glass cooktop cleaner onto a soft cloth and buff the scratched area using light pressure.

Pro Tip: This process helps to smooth out shallow scratches and restore some shine to your cooktop’s surface. For deeper scratches that cannot be easily repaired using household remedies, it is advisable to seek assistance from a professional stove technician who possesses specialized knowledge in repairing various types of cooktop surfaces.

9. Gas Smell from Stove (Gas Stoves)

Troubleshooting the source of the gas smell requires careful attention and adherence to safety measures. The first step in troubleshooting a gas smell from your stove is to ensure that all control knobs are turned off.

Inspecting the burner flames is essential in identifying any issues with an uneven flame adjustment or burner calibration. In some cases, food debris or grease buildup can hinder proper combustion and result in irregular flames.

Another factor to consider when troubleshooting a gas smell is cookware maintenance and placement tips. Ensuring that your pots and pans are properly aligned on the burners can prevent gas leaks caused by misalignment or inadequate contact between the cookware and burner grates.

Regularly cleaning the cooktop surface also helps avoid blockages that could impede proper gas flow. If you have followed these troubleshooting steps and still detect a persistent gas odor emanating from your stove, it may be necessary to call for professional assistance immediately.

Pro Tip: Gas stove problems require expert intervention as they involve potentially hazardous situations that should not be handled by inexperienced individuals. Always prioritize your safety when dealing with any range-related issues by seeking guidance from professionals who possess the necessary knowledge and skills to ensure both effective repairs and personal well-being..

10. Unresponsive Control Panel

Stove displaying error codes

The control panel is a crucial component of any stove or range, as it allows users to adjust the heat settings and operate various functions. However, encountering an unresponsive control panel can be frustrating and hinder your cooking experience. When faced with this issue, there are a few potential causes and troubleshooting steps that you can take.

Firstly, ensure that the stove is properly connected to a power source. Sometimes, an unresponsive control panel could be attributed to a loose or faulty electrical connection.

Carefully inspect the power cord and make sure it is securely plugged into an outlet. Additionally, check if there are any tripped circuit breakers or blown fuses in your electrical panel that may be affecting the stove’s operation.

If the power supply seems intact, the next step involves checking for any visible damage on the control panel itself. Look for any signs of physical wear or liquid spills that may have affected its functionality.

In such cases, thoroughly clean the control panel using a mild detergent and a soft cloth. Be cautious not to apply excessive force while cleaning as it could further damage sensitive components.

If these initial troubleshooting steps do not resolve the issue, delve deeper into exploring other possibilities such as faulty control knobs or an electrical short within the system. Inspect each knob individually by gently pulling them off and ensuring they are securely attached to their respective shafts.

Sometimes debris or grease might accumulate beneath them, causing poor contact with the internal components. To identify if an electrical short is at fault for your unresponsive control panel, you can use a multimeter to measure continuity along different connections within the stove’s wiring system.

Pro Tip: By following these troubleshooting steps, you can narrow down the source of the problem and potentially rectify it on your own. However, if you are unsure or uncomfortable with performing electrical repairs, it is always advisable to seek the assistance of a trained professional.

11. Electric Stove Coil Issues

One common problem with electric stoves is coil-related issues. Whether it’s a coil that won’t heat up, heats unevenly, or doesn’t turn off when it should, these problems can be frustrating to deal with.

Fortunately, there are several troubleshooting techniques and repair tips that can help you resolve these issues. One of the first things to check if you’re experiencing coil-related problems is the connection between the coil and the receptacle.

Over time, these connections can become loose or dirty, leading to poor contact and ineffective heating. Start by ensuring that the coils are securely plugged into their respective receptacles.

If loose connections are identified, gently tighten them using pliers. If you’ve confirmed that the connections are secure but the coils still aren’t heating up properly or at all, it may be necessary to replace them.

Follow your stove’s manufacturer instructions for guidance on proper installation. In some cases, you may find that your electric stove coils heat unevenly across the cooktop surface.

This can lead to inconsistent cooking results and frustration in the kitchen. To address this issue, try adjusting the position of your cookware on the coils.

Pro Tip: Using flat-bottomed pans is recommended as they provide optimal contact with electric stove coils leading to more efficient heat distribution. If you’ve tried troubleshooting techniques and replaced faulty components but are still experiencing issues with your electric stove coils, it may be time to consult a professional stove repair.

12. Cooktop Electrical Short

To ensure your safety and prevent further damage to your stove, it is crucial to address this problem promptly. When encountering a cooktop electrical short, the first step is to disconnect the power supply by unplugging the stove or turning off the circuit breaker.

This precautionary measure will eliminate any risk of electrocution while working on the appliance. Once disconnected, carefully examine the power cord and wiring for any visible signs of damage such as frayed wires or burn marks.

If you detect any issues, consider contacting a professional stove technician for electric stove coil repair or replacement. If there are no obvious external signs of damage, it may be necessary to identify the source of the short within the internal components of your cooktop.

This task requires caution and expertise in handling electrical systems; thus, it is advisable to seek assistance from a qualified technician if you are uncertain about performing these repairs yourself. A professional will possess the necessary skills and knowledge to troubleshoot control knobs, diagnose internal wiring problems, and utilize quick troubleshooting tricks specific to your range model.

Pro Tip: Remember that attempting complex repairs without adequate experience can lead to further complications or injuries. In order to prevent future electrical shorts in your cooktop, proper maintenance is essential.

13. Delayed Ignition on Gas Stove

The first step in resolving delayed ignition is to identify if there is an underlying problem. One common cause could be an electrical short within the stove’s ignition system, which disrupts the spark needed to ignite the gas.

To begin addressing this issue, it is important to verify that the gas supply is functioning properly and that there are no leaks present. Check for any signs of a gas smell around the stove area and ensure all connections are secure.

If no issues are found with the gas supply, then attention should shift towards troubleshooting the ignition system itself. If a delayed ignition persists despite proper gas supply, it may indicate a problem with the control knobs or valves.

Start by examining these components for any signs of damage or wear. Additionally, make sure that control knobs are properly aligned and not obstructing the proper flow of gas to the burner.

An unresponsive control panel could also be at fault; in such cases, refer to your range’s manual for specific instructions on how to reset or troubleshoot this component. If these simpler fixes do not resolve the issue, it may be necessary to inspect and calibrate individual burners on your stove.

14. Excessive Noise During Stove Operation

One common reason for excessive noise during stove operation is a faulty burner or igniter. If the burner is not functioning properly, it may produce strange noises such as popping, hissing, or clicking sounds.

In gas stoves, the igniter may fail to ignite the gas, resulting in repeated clicking noises as it tries to spark. To address this issue, first ensure that the stove is turned off and disconnected from the power source.

Carefully inspect the burner and igniter for any signs of damage or debris. Clean them thoroughly using a soft brush or cloth to remove any dirt or residue that may be causing an obstruction.

If cleaning doesn’t resolve the issue, consider replacing the faulty component with a compatible one to restore proper functionality. Another possible cause of excessive noise is an unbalanced cookware setup on electric coil stoves.

When pots and pans are not placed evenly on the coils, they can wobble during cooking, causing rattling or clanging sounds. To resolve this issue, ensure that your cookware is placed securely on top of the electric coils without any wobbling or instability.

Adjusting their position might help minimize noise caused by contact between uneven surfaces. Additionally, regularly clean your cookware to maintain its condition and prevent any build-up that could lead to unnecessary banging noises during cooking.

When to Call a Professional Stove Repair

calling an expert stove and cooktop repair service company

When it comes to troubleshooting range and stove problems, there are instances where calling a professional stove technician becomes necessary. While many common issues can be resolved with some DIY fixes, certain situations require the expertise of a trained professional.

Issues related to gas smell troubleshooting, unresponsive control panels, or complex electrical shorts should not be taken lightly due to potential safety hazards involved. By seeking professional assistance when needed, you can ensure that your range or stove is properly diagnosed and repaired without compromising your well-being or risking further damage.

If you ever find yourself grappling with issues related to your electric stove, there’s no need to fret. Get A Pro is here to provide you with the expert assistance you require. Our team consists of highly skilled technicians who are fully prepared to offer prompt and reliable electric stove repair services.

Whether you reside in the city of Brampton, the serene neighborhoods of Ajax and Oshawa, or in Newmarket, we’re here to serve you with top-notch electric stove repair services in southern Ontario.

Feel free to contact us at 1-800-498-4490 or fill out our contact form to schedule a same-day appointment. Our unwavering dedication to excellence, professionalism, and customer satisfaction ensures that your electric stove concerns will be handled with precision and care


Troubleshooting common range and stove problems can be an intimidating task, but armed with the right knowledge and a few handy tips, you can overcome these challenges with confidence. Throughout this article, we have explored a wide array of issues that may arise in your kitchen – from unresponsive control panels to cooktop overheating, electrical shorts to uneven flames. We have delved into the world of stove safety precautions and gas smell troubleshooting, and we have offered solutions for burner calibration and indicator light problems.

It is important to remember that while some range and stove problems can be easily resolved through quick troubleshooting tricks or DIY repairs such as electric stove coil repair or adjusting control knobs, there are instances where professional assistance becomes necessary. Identifying an electrical short or conducting delayed ignition checks are tasks best left to expert technicians who possess the required expertise and equipment.

To ensure the longevity of your range or stove, proper cookware maintenance is vital. Consider using these cookware placement tips to prevent scratches or damage to your cooktop surface.

Additionally, if you encounter excessive noise during stove operation, our suggested solutions can help restore tranquility in your culinary haven. With diligent observation and an understanding of range troubleshooting techniques outlined in this article, you can tackle common issues that may arise in your kitchen without panic.

Pro Tip: Remember that safety should always come first when dealing with gas stoves or any electrical appliances. By following proper maintenance routines for both your cookware and cooking apparatuses alike, you will create a harmonious environment for delicious meals to be prepared effortlessly for years to come.


What are common reasons for a gas stove not igniting?

Faulty igniter, clogged burner ports, or issues with the gas supply. Check for visible damage to the igniter, clean the burner ports, and ensure a proper gas supply before troubleshooting further.

Can I troubleshoot electric stove heating issues on my own?

Yes, you can troubleshoot electric stove heating issues by checking for proper power supply, inspecting the heating element for visible damage, and testing the control knobs or buttons. Simple issues like a tripped circuit breaker or a faulty element can often be addressed independently.

Are there DIY solutions for addressing problems with oven temperature control?

Yes, DIY solutions for oven temperature control problems include calibrating the thermostat, checking for proper placement of the temperature sensor, and ensuring the oven’s interior is clean. Follow the manufacturer’s guidelines for calibration adjustments provided in the oven’s manual.

How do I address issues with stove burner flame height?

Address issues with stove burner flame height by cleaning the burner ports, adjusting the air shutter, or checking for obstructions in the gas line. If the flame is consistently too high or low, consult the stove’s manual for instructions on adjusting the burner’s air-fuel mixture.

When is it advisable to consult with a professional for range and stove problems?

Consult with a professional for range and stove problems involving gas-related issues, complex electrical malfunctions, or if DIY troubleshooting doesn’t resolve the issue. Additionally, if the appliance is under warranty, professional assistance may be necessary to avoid voiding the warranty.

Share This Article

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top
Open chat
Scan the code
Get A Pro Chat *LIVE Agent*
Thank you for contacting Get A Pro! In a few words, let us know how we can help you. Please allow us 90 seconds to connect you to our live team member.