Get-A-Pro-Appliance-Repair-Logo-300x80

Whirlpool Dishwasher Error Codes Troubleshooting

Whirlpool Dishwasher Error Codes Troubleshooting
Table of Contents

Broaden your knowledge of dishwasher repair with insightful articles such as

Whirlpool Appliance Error Codes – Troubleshoot and Repair

Whirlpool Dryer Error Codes Troubleshooting

Whirlpool Stove and Oven Error Codes Troubleshooting

Quick Tips For Resetting an Error Code on Whirlpool Dishwasher

Resetting a Whirlpool dishwasher error code quickly can save time and frustration. Follow these steps to reset the error code efficiently:

  • Safety first: Always disconnect the dishwasher from its power source to prevent any electrical accidents.
  • Identify the error: Determine the specific error code displayed on the dishwasher’s control panel.
  • Consult the manual: Refer to the manufacturer’s manual to find instructions on resetting the error code or troubleshooting steps.
  • Try button combinations: Some error codes can be reset by pressing specific buttons on the control panel in a certain sequence. Refer to the manual for the appropriate combination.
  • Wait for reset: After initiating the reset procedure, wait for a few moments to allow the dishwasher to complete the reset process.
  • Test functionality: Once the error code is reset, run a test cycle on the dishwasher to ensure that the issue has been resolved.
  • Contact professional help if needed: If the error persists or if you’re unsure about performing the reset, contact a Whirlpool dishwasher repair  for further assistance.

By following these steps, you can quickly reset a Whirlpool dishwasher error code and get your appliance back to proper functioning.

F1E1 – Stuck relay on the electronic control board

The F1E1 error code on a Whirlpool dishwasher signals a stuck relay on the electronic control board, causing various operational issues. Here’s how to troubleshoot it:

  • Reset Power: Turn off the dishwasher’s power at the circuit breaker for about five minutes to allow the control board to reset.
  • Check for Persistence: After restoring power, see if the error code persists. If it does, further action is needed.
  • Inspect and Potentially Replace Control Board: If resetting doesn’t work, inspect the electronic control board and consider replacing it if necessary.
  • Ensure Safety: Before any repair attempts, disconnect power from the dishwasher to ensure safety. Refer to the user manual for guidance on accessing internal components.
  • Consider Professional Help: If uncomfortable with DIY repairs or unsure about complex troubleshooting, consult a Whirlpool dishwasher repair technician for expert assistance.

Following these steps can potentially resolve the F1E1 error code without costly repairs or replacements. Always prioritize safety and seek professional help if needed.

F1E2 – Damaged memory on control board

When dealing with the error code F1E2 on Whirlpool dishwashers, it typically points to damaged memory on the control board. Here’s what you need to know:

  • Causes: Power surges or voltage fluctuations during operation are common culprits for damaging the control board’s memory. Additionally, physical damage from mishandling or moisture exposure can contribute to memory issues.

Troubleshooting Steps

  • Safety First: Disconnect power to the dishwasher before starting any inspection or troubleshooting.
  • Visual Inspection: Check the electronic control board for physical damage like burnt components or loose connections.
  • Reset: Attempt to reset the dishwasher by turning off its power supply at the circuit breaker for a few minutes before restoring it.
  • Professional Repair: If resetting doesn’t work, it’s best to seek assistance from a professional Whirlpool dishwasher repair service. They have the expertise and tools to diagnose and repair complex issues effectively.
  • Replacement: In severe cases, replacing the electronic control board may be necessary, especially if other troubleshooting attempts fail or extensive damage is evident.
  • Prevention: While some causes of memory damage are beyond immediate control, you can minimize risks by properly grounding your dishwasher, using surge protectors, and maintaining it regularly.

Following these steps and precautions can help address memory-related errors and maintain the optimal performance of your Whirlpool dishwasher.

F2E1 – Stuck button on the user interface control

Encountering the F2E1 error code on your Whirlpool dishwasher signals a stuck button on the user interface control. Here’s how to troubleshoot:

  • Inspect buttons for debris or spills causing sticking.
  • Clean buttons with a soft cloth and mild solution.
  • Ensure all buttons feel responsive and visually normal.

If the issue persists:

  • Power off and disconnect the dishwasher for 10 minutes to reset.
  • Prioritize safety; consult the manual or a certified technician for further repairs.

F2E2 – User interface and electronic board communication error

If you encounter the F2E2 error code on your Whirlpool dishwasher, indicating a user interface and electronic board communication problem, follow these steps:

  • Turn off and unplug the dishwasher before any repairs.
  • Check wiring connections between the user interface control and electronic control board for damage or looseness.
  • Reset the error code by turning off the dishwasher’s power at the circuit breaker for a few minutes, then turning it back on.
  • If resetting doesn’t work, consider replacing one or both components.

Refer to the dishwasher manual or seek professional repair assistance if needed.

F3E1 – Thermistor/OWI sensor failure

Understanding Whirlpool dishwasher error code F3E1 is crucial for troubleshooting. Here’s what you need to know:

  • Error Code Explanation: F3E1 indicates a problem with the thermistor/OWI sensor in the dishwasher.
  • Function of Thermistor/OWI Sensor: This component detects water temperature to ensure effective cleaning and sanitization.
  • Common Causes: Malfunctioning or faulty sensor due to damage, wear, loose connections, or wiring issues.

Troubleshooting Steps

  1. Safety First: Turn off and disconnect the dishwasher from power.
  2. Inspect Sensor: Check for visible damage or corrosion on the sensor.
  3. Check Wiring: Ensure secure connections and no damage or fraying.
  4. Reset Dishwasher: Turn off the circuit breaker for 10 minutes before restarting.

F3E2 – Shorted thermistor/OWI sensor

Encountering the F3E2 error code on your Whirlpool dishwasher often indicates a shorted thermistor or OWI sensor, disrupting its normal operation. Here’s what you can do:

  • Check for water leakage around the thermistor and OWI sensor, as moisture can cause a short circuit and trigger the error.
  • Inspect the wiring connections to these components for any damage or looseness that might affect their function.
  • Dry off any moisture present and ensure all connections are secure and undamaged.
  • Try resetting your dishwasher by turning off power for around five minutes before turning it back on.

F3E3 – OWI failed to calibrate or the drain hose check valve failed

Encountering the F3E3 error code on your Whirlpool dishwasher suggests issues with the optical water indicator (OWI) sensor calibration or the drain hose check valve. Here’s how to troubleshoot:

  • Check the drain hose for kinks or blockages hindering water flow and ensure secure connections to the dishwasher and sink drain.
  • If blockages or loose connections are found, rectify them promptly.

To address OWI sensor calibration:

  • Disconnect power and remove any items from inside the dishwasher.
  • Remove the lower spray arm to access the filter assembly.
  • Thoroughly clean the filter to remove debris that may interfere with sensor readings.
  • Remove the OWI sensor near the front of the dishwasher’s tub and inspect for damage or corrosion.
  • Clean the sensor gently with warm soapy water if necessary.
  • Reinstall the OWI sensor carefully.

After completing these steps, reconnect power and run a test cycle. If the error persists, there may be an issue with the OWI sensor or control board. Seek professional assistance for accurate diagnosis and resolution.

F4E1 or F4E2 – Communication error between the electronic board and the circulation pump

Encountering error codes F4E1 or F4E2 on your Whirlpool dishwasher signals a communication problem between the electronic board and circulation pump. Here’s how to address it:

  • Check for loose connections or damaged wiring between the electronic board and circulation pump.
  • Vibrations from usage can cause wires to loosen or break, disrupting communication.
  • Malfunctioning electronic board or circulation pump may need replacement.
  • Prevent future errors with regular maintenance and inspections:
  1. Ensure secure and undamaged connections.
  2. Keep the dishwasher clean to prevent debris-related issues.
  • Address any unusual noises, leaks, or malfunctions promptly to prevent escalation.
  • Consider professional assistance for complex issues to avoid further complications or warranty voidance.

Understanding these causes empowers you to troubleshoot minor issues yourself and know when to seek professional help for complex problems, ensuring optimal dishwasher performance for years to come.

F5E1 – Door switch failure

Encountering the F5E1 error code on your Whirlpool dishwasher signals a door switch failure. Here’s how to troubleshoot:

  • Reset the dishwasher: Turn off power for 5 minutes, then restore.
  • Inspect door switch: Look for damage or misalignment; ensure connections are secure.
  • Test continuity: Use a multimeter to check for continuity across the door switch terminals.
  • Replace if necessary: If there’s no continuity when the switch should be closed, consider replacement.

If issues persist or if unsure, seek help from a professional Whirlpool dishwasher repair technician for accurate diagnosis and replacement of faulty components.

F5E2 – Control detects door not opening

Encountering the F5E2 error on your Whirlpool dishwasher indicates a problem with the door not opening properly. Here’s what to do:

  • Check the door latch for damage or misalignment, and clean any debris obstructing its function.
  • Consider replacing the latch mechanism if necessary.
  • Another potential cause could be a malfunctioning control board.
  • Try power cycling the dishwasher by turning off power for a few minutes and then turning it back on to reset any communication glitches.
  • If troubleshooting fails, seek professional assistance from a Whirlpool dishwasher repair technician for specialized help.
  • Always prioritize safety by disconnecting power before attempting any repairs or inspections involving electrical components.

F6E1 or F06 – Won’t fill

Encountering the F6E1 or F06 error code on your Whirlpool dishwasher signals a water inlet valve issue, resulting in failure to fill with water. Here’s what to do:

  • Check Water Inlet Valve: Look for clogs or wear in the valve, which may impede water flow.
  • Inspect Water Supply: Ensure proper water pressure and no hose kinks.
  • Verify Electrical Components: Examine control board and wiring for potential issues.
  • Safety First: Always disconnect the dishwasher from power before troubleshooting.

To troubleshoot

  • Inspect Water Supply: Ensure valve supplying water is fully open and check for hose obstructions.
  • Examine Water Inlet Valve: Look for damage or debris buildup.
  • Test Electrical Continuity: Use a multimeter to check valve’s electrical continuity per the manual’s instructions.

Following these steps can help diagnose and resolve the F6E1 or F06 error, but if unsure, seek professional repair assistance.

F6E2 or F02 – Water inlet valve failure

Encountering the F6E2 or F02 error on your Whirlpool dishwasher signals a water inlet valve issue. Here’s what to do:

  • Turn off and unplug the dishwasher for safety.
  • Ensure both hot and cold water supply valves are fully open and clear of obstructions.
  • Inspect the water inlet valve for debris or damage; clean or replace if necessary.
  • Check wiring connections for any signs of damage or disconnection.

For persistent issues, consider professional assistance:

  • Certified repair technicians specialize in Whirlpool appliances and can diagnose and resolve complex issues effectively.
  • Understanding error codes like F6E2 or F02 can help troubleshoot efficiently and save time and money.

To prevent future errors

  • Maintain regular cleaning of filters.
  • Use suitable detergents to avoid errors like FAE1.
  • Check for leaks to prevent an F1E1 error.
  • Avoid overloading to prevent an F5E1 error.
  • Firmware updates may resolve some error codes like F2E1 or F3E1.

Following these tips ensures optimal performance and longevity for your Whirlpool dishwasher.

F6E3 – Suds or air are in the water pump

Encountering the F6E3 error code on your Whirlpool dishwasher indicates suds or air in the water pump, which can disrupt its performance. Here’s how to troubleshoot:

  • Excessive Detergent Usage: Using too much detergent can cause suds to form during the wash cycle, leading to pump issues. Follow manufacturer’s guidelines for detergent usage.
  • Check for Leaks and Loose Connections: Inspect hoses, valves, and connections for leaks or looseness, which can allow air bubbles into the pump. Tighten connections or replace faulty components.
  • Run a Rinse Cycle: Start with a rinse cycle without dishes to clear excess suds or air from the system.
  • Clean Dishwasher Filters: If problems persist, clean dishwasher filters to remove debris obstructing the pump.
  • Update Firmware: Consider updating your dishwasher’s firmware to address potential software glitches contributing to the error code.

If issues persist, seek professional repair assistance. Remember to prioritize safety and follow manufacturer guidelines for maintenance to prevent future errors.

F6E4 – The float switch is open

Encountering the F6E4 error code on your Whirlpool dishwasher signals an open float switch, crucial for monitoring water levels. Here’s what to do:

  • Check for debris or food particles under the float assembly, which may hinder its movement and cause the switch to stay open.
  • Ensure the float can move freely by removing any obstructions carefully.
  • If the issue persists after clearing obstructions, the float switch itself may be faulty or malfunctioning.
  • Contact a professional Whirlpool dishwasher repair service to inspect and replace the faulty component if necessary.

F6E6 – Incoming water is too cold

The F6E6 error code on a Whirlpool dishwasher signals that the incoming water temperature is too cold, hindering proper function. Here’s how to address it:

Check Hot Water Supply System

  • Ensure your water heater maintains an adequate temperature.
  • Inspect for plumbing issues like partially closed hot water valves or low water pressure.
  • Confirm the dishwasher’s connection to a suitable hot water source as specified by Whirlpool.

Troubleshooting Steps

  • Verify if other faucets in your home dispense hot water at the right temperature.
  • If not, contact a plumber to address hot water supply system issues.
  • Check for obstructions in the dishwasher’s inlet valve or filter screens.
  • Ensure the hot water line hose is free of kinks or blockages.

Professional Assistance

  • If troubleshooting fails, seek help from a Whirlpool dishwasher repair technician.
  • They can diagnose and fix complex internal components or circuitry issues effectively.

Preventive Maintenance

  • Follow manufacturer recommendations for maintenance.
  • Regularly clean filter screens and verify hot water supply temperatures.
  • Address plumbing concerns promptly to ensure trouble-free operation.

Understanding and addressing dishwasher error codes promptly can help maintain efficient performance and prevent future issues.

F6E7 – Disconnected or damaged flow meter

The F6E7 error code on a Whirlpool dishwasher signals a problem with the flow meter, which measures water intake during cycles. Here’s what to know:

  • Causes: The flow meter may be physically damaged, clogged with debris or minerals, or affected by electrical issues.

Troubleshooting Steps

  • Turn off power to the dishwasher before inspecting.
  • Check wiring and connections for damage or disconnection; repair or replace as needed.
  • Clean the flow meter of debris with a soft brush to ensure proper function.

Understanding error codes like F6E7 helps users effectively troubleshoot and resolve water intake issues in their Whirlpool dishwasher, promoting smoother operation and preventing recurrence.

F6E8 – Problem with water softener regeneration valve

The F6E8 error code on a Whirlpool dishwasher points to a problem with the water softener regeneration valve, which is crucial for proper water recycling during wash cycles. Here’s how to address it:

  • Check for obstructions or blockages in the water softener regeneration valve. Cleaning it thoroughly can remove debris causing the malfunction.
  • Inspect the supply line connected to the valve for kinks or restrictions, which may impede water flow. Straighten or replace damaged sections as needed.
  • Refer to your dishwasher’s manual for specific troubleshooting steps. If unsure, seek help from a certified Whirlpool dishwasher repair technician.

F7E1 or F10 – Heating element doesn’t work

Encountering error codes F7E1 or F10 on your Whirlpool dishwasher typically points to a heating element malfunction, which can hinder proper dishwashing. Here’s what to consider:

  • Identify the Problem: Error codes F7E1 or F10 often signify a faulty heating element or related components like temperature sensors or thermostats.
  • Inspect for Damage: Check the heating element for visible signs of wear, cracks, or damage caused by regular use and exposure to high temperatures.
  • Safety Precautions: Before attempting any repairs, ensure the dishwasher is powered off and follow safety guidelines.
  • Professional Assistance: If no visible damage is found but you suspect issues with temperature sensors or thermostats, seek assistance from a qualified Whirlpool dishwasher repair technician for accurate diagnosis and resolution.

Promptly addressing heating element issues will help restore your dishwasher’s optimal performance, ensuring your dishes are cleaned and sanitized effectively.

F7E2 – Heating element won’t shut off

Encountering the F7E2 error code on your Whirlpool dishwasher indicates a problem with the heating element not shutting off properly. Here’s what you need to know:

  • Issue: The heating element is not turning off as it should, leading to potential overheating and safety concerns.

Common Causes

  • Faulty relay on the electronic control board: This relay controls the power supply to the heating element and may get stuck in an open position, causing continuous operation.
  • Malfunctioning temperature sensor or thermostat: These components regulate the dishwasher’s temperature during cycles. If they fail to detect the desired temperature, they may keep supplying power to the heating element.

Resolution

  • Replace or repair the electronic control board if the relay is faulty.
  • Inspect and replace any malfunctioning temperature sensors or thermostats to ensure proper temperature regulation.

Addressing these issues through professional repair or component replacement will effectively resolve the F7E2 error code and restore your dishwasher’s performance.

F8E1 or F03 – Slow drain

Encountering error codes F8E1 or F03 on your Whirlpool dishwasher signals a slow drain problem. Here’s what to do:

  • Check the drain hose for kinks or clogs, as these can restrict water flow.
  • Disconnect the hose and inspect for debris, cleaning it out thoroughly.
  • Straighten any kinks to restore proper water flow.
  • Examine the dishwasher’s filter and pump assembly for obstructions.
  • Remove any food particles or debris from the filter using a soft brush.
  • Inspect the pump assembly for foreign objects, ensuring the dishwasher is powered off before any repairs.
  • If necessary, clean the check valve and air gap to ensure efficient drainage.

If the error persists, consider seeking professional help from a certified Whirlpool dishwasher repair technician for further assistance and diagnosis.

F8E2 – Drain pump electrical problem

The F8E2 error code on a Whirlpool dishwasher points to a drain pump electrical problem, possibly due to a faulty motor or electrical connections. Here’s how to troubleshoot:

  • Safety first: Unplug the dishwasher and turn off the water supply to prevent electric shocks and leaks.
  • Prepare basic tools like screwdrivers and pliers for dismantling parts if needed.
  • Check for visible damage or blockages in the drain pump system, including the drain hose for kinks or clogs.
  • Remove the lower access panel to access the drain pump motor.
  • Inspect electrical connections for looseness or damage and repair as necessary.
  • Test the continuity of the drain pump motor using a multimeter to ensure proper functioning.

If issues persist despite checking connections and clearing blockages, seek professional repair service for a possible faulty drain pump motor.

F9E1 – Electronic board can’t detect position of the diverter disc

Encountering the F9E1 error on your Whirlpool dishwasher indicates an issue with the diverter disc, which directs water flow during different cycles. Here’s how to troubleshoot:

  • Ensure the dishwasher is turned off and disconnected from power.
  • Inspect the diverter disc for damage or blockage.
  • Clean any debris or mineral buildup around the disc with a soft brush or cloth.
  • Try removing and reinstalling the diverter disc to realign it with its sensor position on the electronic board.

F9E2 – Diverter motor is stuck on

Encountering the F9E2 error code on your Whirlpool dishwasher suggests a stuck diverter motor, crucial for directing water flow. Here’s what to do:

  • Disconnect power and remove debris or obstructions around the diverter motor area.
  • Clean accumulated debris using a soft brush or cloth.
  • Check for loose connections or damaged wiring.
  • If the issue persists, consider replacing the diverter motor, following the user manual for guidance.
  • If unsure, seek professional help for safe repairs.

Remember to prioritize safety by disconnecting power before any maintenance and handling electrical components with care.

FAE1 – Detergent dispenser failure

Encountering the FAE1 error on your Whirlpool dishwasher signals a detergent dispenser malfunction. Here’s how to troubleshoot:

  • Mechanical Issues: Check if the dispenser door is opening properly or stuck. Clear any obstructions or debris hindering its operation.
  • Electrical Problems: Faulty wiring connections or damaged electronic components in the control system can cause dispenser failure. Seek professional repair for accurate diagnosis and resolution.

To resolve minor glitches

  • Reset: Power off your dishwasher by unplugging it or switching off its circuit breaker for a few minutes, then restart. This may resolve temporary software issues.

FAE2 – Vent wax motor electrical problem

Encountering the FAE2 error code on your Whirlpool dishwasher signals a likely issue with the vent wax motor electrical system. Here’s what to do:

  • Understand that the vent wax motor controls the opening and closing of the vent during drying to release moisture.
  • Common causes of this error include a faulty or damaged vent wax motor or electrical disruptions.
  • Start troubleshooting by visually inspecting the vent wax motor for damage or obstructions.
  • Ensure proper connections and placement of the motor.
  • If no visible issues, use a multimeter to test the motor’s functionality as per the dishwasher manual’s instructions.

For complex electrical problems, it’s advisable to seek assistance from professional Whirlpool dishwasher repair services to prevent further damage or safety hazards.

FAE3 – Drying fan failure

The FAE3 error code on a Whirlpool dishwasher points to a malfunction with the drying fan, impacting the drying process. Here’s what you can do:

  • Check for Motor Failure: The drying fan’s motor may be faulty due to continuous use and exposure to heat and moisture. This could be a reason for the error.
  • Inspect for Blockages: Debris or obstructions in the vent system can impede proper airflow, leading to the error. Carefully clear any blockages using a soft brush or cloth.
  • Examine Wiring Connections: Look for loose connections or damaged wires leading to the drying fan motor. If issues are found, consider replacing or repairing them.

If these troubleshooting steps don’t resolve the issue, seek professional Whirlpool dishwasher repair assistance. A technician will have the expertise and tools needed to accurately diagnose and fix the drying fan failure, ensuring effective dish-drying performance.

F01 – Anti-flooding overflow

The F01 error code on a Whirlpool dishwasher signals an anti-flooding overflow issue, typically caused by water detected in the machine’s base. Here’s what you need to know:

  • Causes: Blocked drain hose, faulty inlet valve, malfunctioning float switch.

Troubleshooting Steps

  • Check drain hose for obstructions and remove if found.
  • Inspect inlet valve for damage or debris buildup.
  • Ensure float switch moves freely by gently manipulating it.
  • Professional Assistance: If troubleshooting doesn’t work, seek help from a certified repair technician familiar with Whirlpool appliances.

Understanding and addressing dishwasher error codes like F01 promptly can help maintain appliance performance. Regular maintenance and staying updated on firmware can prevent such issues in the future.

F04 – Thermostat fault

The F04 error code on your Whirlpool dishwasher indicates a thermostat fault, usually due to issues with the temperature sensor or thermostat itself. Here’s what to do:

  • Check for loose connections or damaged wires around the thermostat and temperature sensor.
  • Inspect these components for signs of wear and tear that could affect their performance.
  • If everything looks intact, consider replacing either the thermostat or temperature sensor, depending on the faulty component.

Remember

  • Repairing these parts requires technical expertise.
  • If unsure or if your appliance is under warranty, seek professional assistance from a Whirlpool dishwasher repair specialist for accurate diagnosis and resolution.
  • Stay safe and follow proper precautions when dealing with electrical appliances.

F07 – Water turbine damaged

Encountering the F07 error code on your Whirlpool dishwasher often indicates a water turbine issue. Here’s what you need to know:

  • The water turbine, or circulation pump, is vital for distributing water through the spray arms for efficient dish cleaning.
  • Common causes of water turbine damage include regular wear and tear and obstructions from foreign objects.

Troubleshooting steps

  • Turn off the dishwasher and disconnect power.
  • Check spray arms for debris and remove blockages.
  • Inspect the circulation pump for visible damage.
  • If internal damage is suspected, contact a certified Whirlpool technician for repair to avoid voiding warranty coverage.

Understanding your dishwasher’s components helps in effective troubleshooting and ensures long-term performance.

F08 – Temperature timeout fault

The F08 error code on a Whirlpool dishwasher signifies a temperature timeout fault, indicating a delay in heating water to the desired temperature. Here’s how to address it:

  • Check Heating Element: Look for damage or corrosion on the heating element; if found, replace it.
  • Ensure Unobstructed Water Flow: Make sure nothing is blocking water flow around the heating element, as this can cause overheating and trigger the F08 error.
  • Inspect Thermostat and Sensor: Examine the dishwasher’s thermostat and temperature sensor for damage or loose connections; repair or replace if necessary.
  • Verify Hot Water Supply: Ensure your hot water heater is functioning correctly and supplying enough hot water for a successful wash cycle.

By addressing these potential causes, you can troubleshoot and resolve the F08 temperature timeout fault on your Whirlpool dishwasher effectively, potentially avoiding the need for professional assistance.

F09 – Software error

F09 – Software Error: If your Whirlpool dishwasher displays the F09 error code, it indicates a software problem. Here’s what you can do:

  • Reset the dishwasher by turning off the power for 5 minutes, then turning it back on.
  • Perform a hard reset by holding down the start button for 10-15 seconds to force a system reboot.
  • Consider updating the firmware by following instructions from Whirlpool’s website or your product manual.

If these steps don’t work or if you’re unsure, it’s best to seek professional repair service or contact Whirlpool customer support for assistance. Keeping the software updated ensures smooth operation of your dishwasher.

F11 – Wash pump failure

The F11 error code on a Whirlpool dishwasher signals a wash pump failure, which can disrupt the cleaning process. Here’s how to troubleshoot:

  • Check for Impeller Blockages: Debris accumulation around the impeller can hinder its rotation. Remove the lower spray arm and inspect the sump area for any visible blockages. Use tweezers or a brush to remove debris. If the impeller is damaged, consider replacing it.
  • Inspect Electrical Connections: Loose connections or faulty wiring can prevent the wash pump motor from operating. Disconnect the dishwasher’s power supply before examining connections. Inspect wires for damage or looseness, and repair or tighten them as needed. Use a multimeter to check for voltage irregularities, and seek professional assistance if necessary.

Resolving the F11 error requires thorough examination of mechanical and electrical components. By addressing impeller blockages and ensuring proper electrical connections, users can potentially fix the issue. If troubleshooting efforts fail, seek help from a qualified technician for safe and effective resolution.

F12 – Main board & Display communication error

Encountering error code F12 on your Whirlpool dishwasher signals a communication problem between the main board and the display. Here’s what to do:

  • Check connections: Ensure all wires and cables between the main board and display panel are securely connected.
  • Inspect for damage: Look for any signs of damage like burnt circuits, discoloration, or corrosion on both components.
  • Professional help: If you spot issues, it’s best to consult a technician for repairs or replacement parts to avoid further complications.
  • Power reset: If everything looks fine, try a power reset by unplugging the dishwasher for five minutes before plugging it back in. This can sometimes fix minor communication glitches.
  • Contact assistance: If troubleshooting doesn’t resolve the problem, contact a certified Whirlpool technician for expert diagnosis and repair to prevent exacerbating the issue.

Remember, DIY repairs without proper knowledge can worsen the problem, so it’s wise to seek professional help if needed.

F13 – Main board fault

Encountering an F13 error code on your Whirlpool dishwasher indicates a main board fault. Here’s what to do:

  • Turn off and unplug the dishwasher for safety.
  • Access the main board by removing any covering panels.
  • Check all connections leading to and from the main board for secure seating.
  • Electrical surges or power fluctuations can cause this fault; consider recent events like thunderstorms or power outages.

Reset the appliance by disconnecting it from power for at least 10 minutes before reconnecting and attempting to run a cycle again.

F15 – Virtual sensor error

Encountering the F15 error code on your Whirlpool dishwasher signals a virtual sensor error. Here’s what to do:

  • Understand the Issue: The F15 error indicates a problem with the dishwasher’s internal sensors responsible for monitoring the wash cycle.
  • Identify Potential Causes: The primary culprit is often a faulty turbidity sensor, which measures water cleanliness during washing.

Troubleshooting Steps:

  • Power Reset: Unplug the dishwasher for five minutes to reset the electronic control board.
  • Sensor Inspection: Clean sensors as per the user manual to remove debris or mineral build-up.
  • Consider Sensor Replacement: If cleaning doesn’t resolve the issue, you may need to replace a faulty sensor.

Update Firmware to Resolve Whirlpool Dishwasher Error Codes (Applicable Models)

In the realm of modern appliances, staying updated with firmware is crucial for resolving error codes in Whirlpool dishwashers. Here’s how:

  • Verify eligibility: Check if your Whirlpool dishwasher model is eligible for a firmware update by visiting the official website or consulting the user manual.
  • Prepare USB drive: Format a USB drive as FAT32 or NTFS with enough free space to accommodate the firmware update file.
  • Download latest firmware: Obtain the appropriate firmware file for your model from Whirlpool’s website or software application and save it to the USB drive.
  • Connect USB drive: Insert the USB drive into the dishwasher’s control panel area with the USB port and power on the appliance.
  • Initiate installation: The dishwasher should detect the firmware update and guide you through the installation process on the screen. Ensure uninterrupted power during installation.
  • Complete installation and reset: After installation, remove the USB drive, power down the dishwasher for at least 30 seconds, then restart. This ensures full integration of the new firmware.

Keep in mind that firmware updates may not solve all error codes, especially those stemming from mechanical or hardware issues. For such cases, seek assistance from a certified Whirlpool repair professional. However, for software-related errors, updating firmware can be an effective solution. Stay informed about firmware releases and follow Whirlpool’s instructions for your model.

Call a Professional Whirlpool Dishwasher Repairman

When dealing with complex error codes on your Whirlpool dishwasher, seeking professional assistance is often the wisest choice:

  • Professional repair technicians specialize in Whirlpool dishwasher repairs and possess the knowledge to quickly identify and resolve error codes.
  • They have access to specialized tools and diagnostic equipment tailored for Whirlpool dishwashers, facilitating efficient troubleshooting.
  • Repair experts can accurately determine whether components need replacement or if there are deeper underlying issues.
  • They have access to comprehensive technical resources, including authorized service manuals and up-to-date information on common error codes.
  • Professional technicians undergo extensive training on Whirlpool models, ensuring they can effectively handle technical issues and restore optimal functioning.

Relying on professional repair services ensures your Whirlpool dishwasher receives expert attention, minimizing potential mistakes and ensuring a swift resolution to error code problems.

If you are located in the Greater Toronto or nearby in the southern Ontario area Get A Pro Canada can help you solve your error code with a Whirlpool dishwasher repair same-day appointment. Serving all over Toronto, Newmarket, Oshawa, Pickering and Barrie.

For Whirlpool dishwasher repair service, contact us at our toll free number 1-800-498-4490 or fill out our contact form on our website and our team will get back to you during business hours!

Conclusion

Troubleshooting Whirlpool dishwasher error codes can be a daunting task, but armed with the right knowledge and resources, it is possible to overcome these challenges. By following the steps outlined in this article, you can effectively diagnose and resolve various error codes that may arise during the operation of your dishwasher. It is essential to keep in mind that while some errors can be easily fixed by performing simple tasks such as resetting the dishwasher or checking for blockages, there may be instances where professional assistance is necessary.

Remember, keeping your dishwasher functioning optimally not only ensures clean dishes but also extends its lifespan. Regular maintenance and proper care go a long way in preventing future error codes from occurring.

By staying proactive and being attentive to any warning signs or unusual behavior from your dishwasher, you can minimize the likelihood of encountering error codes in the first place. While dealing with Whirlpool dishwasher error codes can be frustrating, it should not discourage you from enjoying the convenience and efficiency of this kitchen appliance.

FAQs

What do error codes on my Whirlpool dishwasher indicate?

Error codes on your Whirlpool dishwasher provide specific information about potential issues. Interpret these codes by referring to the appliance’s user manual. The manual outlines the meaning of each code and offers recommended steps for resolution.

Can I troubleshoot and resolve dishwasher error codes without professional assistance?

Many dishwasher error codes can be troubleshooted and resolved without professional assistance. Consult the user manual for troubleshooting steps, which may include checking for blockages, verifying water supply, or resetting the dishwasher. Seek professional help if the issue persists.

Are there online resources to guide me through specific dishwasher error messages?

Explore online resources such as Whirlpool’s official website, forums, and appliance repair websites to find guides and insights on specific dishwasher error messages. These resources often provide detailed instructions for troubleshooting and resolving issues.

Should I replace a part indicated by an error code immediately?

Before replacing a part indicated by an error code, perform thorough troubleshooting to confirm the root cause. Some issues may be resolved by cleaning filters, checking hoses, or resetting the dishwasher. Replace parts only after identifying and addressing the specific problem.

How can I prevent recurring error codes in my Whirlpool dishwasher?

Prevent recurring error codes by following the manufacturer’s recommended maintenance practices, cleaning filters regularly, and ensuring proper loading of dishes. Promptly address issues, and consider professional assistance if error codes persist despite troubleshooting efforts.

Share This Article

Leave a Comment

Your email address will not be published. Required fields are marked *

FOLLOW US
BOOK SERVICE ONLINE
OTHER POSTS
Scroll to Top
Open chat
1
Scan the code
Get A Pro Chat *LIVE Agent*
Thank you for contacting Get A Pro! In a few words, let us know how we can help you. Please allow us 90 seconds to connect you to our live team member.