Why Is My Whirlpool Dishwasher Not Drying The Dishes?

Why Is My Whirlpool Dishwasher Not Drying The Dishes?
Table of Contents

Strengthen your understanding of refrigerator repairs with informative resources like:

15 Common Whirlpool Dishwasher Problems and How to Fix Them

Whirlpool Dishwasher Not Draining? 7 Ways To Repair & Unclog

Whirlpool Dishwasher Not Dispensing Soap And How To Fix It

Incorrect Dishwasher Settings

One common reason for a Whirlpool dishwasher failing to dry dishes adequately could be incorrect settings. It’s crucial to ensure all settings are configured correctly for optimal drying performance. Check the dishwasher’s settings, including options like heated dry or energy-saving dry, and activate them appropriately. Additionally:

  • Refer to the manufacturer’s manual for specific guidance on your model.
  • Proper loading is essential for dishwashers with sensors that adjust cleaning and drying cycles based on dish dirtiness.
  • Avoid overloading to prevent hindering airflow and ensure thorough drying.
  • Be mindful not to obstruct vents or fans that aid efficient air circulation within the dishwasher.

By verifying settings and loading dishes properly, you can address incorrect configurations and improve drying performance.

Insufficient Rinse Aid

Insufficient rinse aid can lead to ineffective drying in Whirlpool dishwashers. To address this:

  • Check if the rinse aid dispenser is filled and refill if necessary.
  • Inspect for any clogs or blockages in the dispenser and remove them.
  • Ensure you’re using the correct rinse aid product and following dosage instructions.
  • Consider adjusting dosage settings on your appliance if drying performance remains poor.

By maintaining adequate rinse aid levels and adjusting dosage settings, you can improve drying efficiency and achieve spotless, dry dishes with your Whirlpool dishwasher.

Overloading the Dishwasher

Overloading the dishwasher can hinder drying effectiveness by limiting hot air circulation and obstructing moisture evaporation, resulting in damp dishes. To ensure optimal drying:

  • Load the dishwasher correctly, following its recommended capacity.
  • Avoid stacking or blocking items to allow proper airflow.
  • Place concave items on an angle for water runoff.
  • Regular maintenance tips:
  • Inspect for debris regularly to maintain optimal performance.
  • Clean filters and remove foreign objects from spray arms or nozzles.

By following these tips and performing regular maintenance, you can effectively address overloading issues and improve dish drying performance in Whirlpool dishwashers.

Water Temperature Issues

Water temperature is vital for effective drying in your Whirlpool dishwasher. Insufficient heat can lead to wet dishes post-cycle, influenced by various factors.

  • Check the home water heater; low temperature affects dishwasher drying.
  • Set water heater to 120°F (49°C) for optimal drying.
  • Ensure the dishwasher’s heating element functions correctly for adequate water temperature.
  • Consult the manual or Whirlpool’s website for troubleshooting steps.
  • Use tools like a multimeter for testing heating element resistance.
  • Monitor for error codes indicating water temperature issues; consult Whirlpool support.
  • Adjust dishwasher settings, utilizing heat dry or high-temperature wash options.
  • Select appropriate settings based on load type; delicate items may require lower temperatures.

Addressing water temperature issues and adjusting settings can significantly enhance drying performance in your Whirlpool dishwasher.

Malfunctioning Heating Element

A common issue with Whirlpool dishwashers not drying dishes is a faulty heating element, crucial for raising water temperature and drying. To troubleshoot:

  • Check for visible damage or disconnection on the heating element, ensuring safety by turning off the power supply.
  • Test continuity with a multimeter and clean any debris or mineral buildup affecting efficiency.
  • Thoroughly inspect and clean both ends of the heating element.
  • If problems persist, there may be internal wiring or control board issues requiring professional help.

Regular maintenance, like cleaning filters and unclogging spray arms, is vital for optimal dishwasher performance and drying.

Clogged Vent or Fan

A clogged vent or fan can hinder your Whirlpool dishwasher’s drying performance, leaving dishes damp after a cycle. Regular cleaning of these components is essential to maintain efficiency.

  • Disconnect the dishwasher and locate the vent on the door’s top or side.
  • Use appropriate tools to remove screws securing the vent cover and clear any debris.
  • Clean fan blades behind the vent cover with a vacuum cleaner attachment.
  • Reassemble components securely and run an empty cycle to test airflow restoration.

Regularly check for clogs in vents and fans to prevent future issues. If problems persist, consult Whirlpool’s documentation or customer support for further assistance.

Dirty or Greasy Interior

A common reason for a Whirlpool dishwasher not drying dishes well is a dirty or greasy interior, which hinders water and heat circulation during the drying cycle. To fix this:

  • Clean the dishwasher thoroughly by removing food particles and wiping surfaces with warm soapy water.
  • Pay attention to areas prone to grease buildup and use white vinegar to tackle tough stains or mineral deposits.
  • Place a cup of white vinegar on the top rack and run a hot water cycle to dissolve residues and odors.

Regular cleaning prevents clogs and ensures efficient drying performance, maintaining the dishwasher’s effectiveness. Always prioritize safety when handling electrical components during maintenance or troubleshooting.

Technical Glitches and Error Codes

Encountering a Whirlpool dishwasher not drying dishes can be worrisome, often due to technical glitches and error codes. Here’s a concise breakdown:

  • Rinse Aid Dispenser: Malfunctioning dispenser can lead to poor drying. Check if dispenser is filled and functioning properly. Clean or replace if clogged or damaged.
  • Error Codes: Dishwasher displays codes like “E1” or “F7” for specific malfunctions. Consult user manual or customer support for guidance. Common causes include heating element issues or faulty sensors.

Having recommended tools on hand for troubleshooting is essential:

  • Multimeter for testing electrical components.
  • Screwdrivers for accessing internal parts.
  • Cleaning brushes for removing debris.
  • Possibly replacement parts if needed.

Addressing rinse aid dispenser issues and understanding error codes are crucial for resolving drying problems effectively. Regular maintenance, like cleaning filters and vents, helps prevent future issues. With a methodical approach and proper tools, identifying and fixing technical glitches is achievable.

Inspect the Motherboard or Control Board

The motherboard or control board in your Whirlpool dishwasher is crucial for its drying function, serving as its brain to ensure efficient operation. If this component malfunctions, it can affect the dishwasher’s ability to dry dishes properly. Here’s how to inspect it:

  • Unplug the dishwasher to avoid electrical hazards.
  • Remove the access panel using a screwdriver.
  • Locate the motherboard/control board inside the dishwasher.
  • Check for damage like burnt marks or loose wires.
  • Consult manufacturer FAQs for specific guidance before replacing.
  • Use error codes or technical glitches for troubleshooting insights.

Inspecting and potentially replacing a faulty motherboard or control board should be done with caution, following manufacturer recommendations for DIY repairs involving integral parts of the dishwasher’s operation.

Regular Maintenance Tips

Regular maintenance is crucial for optimal drying results in your Whirlpool dishwasher. Follow these tips to prevent common issues:

  • Check and adjust drying settings according to the manual.
  • Maintain optimal loading capacity to ensure proper airflow.
  • Keep the dishwasher interior clean to avoid trapping moisture.
  • Ensure adequate water temperature for effective drying.
  • Inspect the motherboard for technical glitches or error codes.
  • Regularly refill the rinse aid dispenser for proper water sheeting.

Implementing these tips reduces the likelihood of encountering drying issues and ensures consistently dry dishes after each wash cycle.


When faced with a Whirlpool dishwasher not drying the dishes, there are several factors to consider. Firstly, it is essential to ensure that the correct drying settings are selected. Double-checking the options and adjusting them accordingly can make a significant difference in achieving optimal drying results.

Furthermore, monitoring water temperatures during cycles can help identify potential problems related to inadequate heating elements or water supply issues. While facing a Whirlpool dishwasher not drying dishes can be frustrating, there are numerous solutions available that can help address this issue effectively.

By ensuring correct settings, using sufficient rinse aid, maintaining a clean interior, following loading capacity guidelines, and performing regular maintenance checks on various components such as vents and heating elements – users can enhance their dishwasher’s performance significantly. With these tips and troubleshooting techniques at hand, it is possible to overcome common challenges associated with dishwashing while enjoying consistently dry and spotless dishes every time!


What are common reasons for a Whirlpool dishwasher struggling with dish drying?

Common reasons for poor dish drying in a Whirlpool dishwasher may include issues with the drying cycle, inadequate use of rinse aid, problems with the heating element, or a malfunctioning drying fan.

Can I troubleshoot problems with the dishwasher’s drying cycle on my own?

Yes, you can troubleshoot problems with the dishwasher’s drying cycle on your own. Ensure that the selected cycle includes drying, and check for any obstructions in the vent or drying fan. Also, make sure the rinse aid dispenser is filled.

Are there DIY solutions for issues related to the dishwasher’s inadequate use of rinse aid?

Certainly, there are DIY solutions for inadequate use of rinse aid. Make sure the rinse aid dispenser is filled, adjust the rinse aid setting if applicable, and check for any clogs in the dispenser.

How do I deal with problems linked to the heating element or drying fan causing drying issues?

If you suspect issues with the heating element, check for visible damage, and test its functionality. For the drying fan, ensure it is not obstructed and spins freely. Clean any debris around the fan. If problems persist, it may be necessary to replace the heating element or fan.

When is it recommended to consult with a professional for Whirlpool dishwasher drying problems?

Consider consulting with a professional if DIY troubleshooting does not resolve the drying issues. Professionals can perform more advanced diagnostics, test components, and replace faulty parts such as the heating element or drying fan if needed. If the problem is complex or involves electrical components, their expertise is valuable for a proper resolution.

Share This Article

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top
Open chat
Scan the code
Get A Pro Chat *LIVE Agent*
Thank you for contacting Get A Pro! In a few words, let us know how we can help you. Please allow us 90 seconds to connect you to our live team member.