8 Reasons Why Your Whirlpool Dryer Won’t Spin

8 Reasons Why Your Whirlpool Dryer Won't Spin
Table of Contents

Boost your understanding of dryer repair with informative articles such as

15 Common Whirlpool Dryer Problems and How to Fix Them

Whirlpool Dryer Not Heating – 10 Reasons and How To Fix

How To Fix a Whirlpool Dryer That Won’t Turn ON? Step-By-Step

1. Broken Drive Belt

A broken drive belt is a common reason for a Whirlpool dryer to stop spinning. The belt connects the motor to the drum, enabling rotation for drying clothes. To check if the drive belt is the issue:

  • Unplug the dryer and ensure it’s off.
  • Remove the access panel using a screwdriver or wrench.
  • Inspect the drive belt for damage like fraying or cracks.
  • If damaged, replace it promptly with a compatible belt.

Replacing a broken drive belt is relatively straightforward:

  • Buy a replacement belt for your specific Whirlpool model.
  • Consult the owner’s manual or online tutorials for installation guidance.
  • Prioritize safety and seek professional help if unsure about the repair.

2. Faulty Door Switch

A common reason why a Whirlpool dryer fails to spin is a faulty door switch. The door switch acts as a safety measure, ensuring the drum only spins when the door is closed securely. Testing and replacing it is relatively simple:

  • Unplug the dryer and locate the door switch near the latch or hinge.
  • Use a multimeter to test for continuity with the door open and closed. Lack of continuity when closed indicates a faulty switch.

Reasons for door switch issues

  • Wear and tear over time from repeated use.
  • Physical damage, such as slamming doors or excessive force during closing.

Replacing the faulty door switch is a straightforward task with basic tools. However, if unsure, seek professional assistance. Remember to rule out the door switch before exploring other potential causes for the dryer not spinning correctly.

3. Worn Out Drum Rollers or Glides

Worn-out drum rollers and glides can cause a Whirlpool dryer to stop spinning. These parts support the drum during the drying cycle but wear out over time.

  • Signs of worn-out parts include squeaking noises and improper tumbling of clothes.
  • Disconnect the dryer, locate the rollers and glides at the back, and inspect them for wear.
  • Replace damaged parts with new ones designed for your model.
  • Clean surrounding parts to prevent future issues.

Proper maintenance prevents future problems and ensures efficient drying performance. Addressing worn-out rollers and glides promptly restores the dryer’s spinning function.

4. Faulty Idler Pulley

A faulty idler pulley can cause a Whirlpool dryer to stop spinning. It’s responsible for maintaining tension on the drive belt, ensuring it stays aligned with the drum. Signs of a faulty pulley include squeaking noises during operation and irregular drum rotation.

  • Squeaking or squealing noises indicate a loose or damaged idler pulley.
  • Irregular drum rotation signals a potential issue with the idler pulley.
  • When diagnosing, disconnect the dryer, locate the idler pulley near the motor, and inspect it for wear or damage.

Repairing the idler pulley assembly is recommended rather than attempting repairs. Essential tools for the job include pliers for removing clips and a wrench for loosening bolts. Consult the dryer’s repair manual for guidance and always follow safety precautions. If unsure, seek professional assistance.

5. Malfunctioning Motor

A malfunctioning motor is a common cause of a Whirlpool dryer’s failure to spin, affecting its drum rotation. Several factors contribute to this issue. The motor may lack power, or worn-out bearings and a seized shaft can hinder rotation. To troubleshoot, disconnect the power and inspect the motor assembly for damage. Test components with a multimeter for continuity.

  • Check for visible damage like burnt wires or loose connections.
  • Use a multimeter to test motor components for continuity.
  • If the motor is worn or fails tests, it may need replacement.

Replacing a dryer motor requires expertise and specialized tools. Seek professional help if inexperienced. Prevent future issues by regularly maintaining the dryer. Keep the lint trap clean, avoid overloading, and inspect electrical connections periodically.

6. Burned Out Thermal Fuse

When your Whirlpool dryer stops spinning, a potential cause to investigate is a burned-out thermal fuse. This safety component prevents overheating in the dryer by cutting off power to the motor if temperatures become too high. Checking the thermal fuse involves unplugging the dryer, removing the back panel, and testing for continuity with a multimeter.

  • The thermal fuse prevents overheating by cutting off power to the motor.
  • To test for a faulty thermal fuse, unplug the dryer, remove the back panel, and use a multimeter.
  • Regularly clean lint traps and exhaust vents to prevent overheating issues.
  • Avoid overloading the dryer to prevent strain on components and heat buildup.

By understanding the importance of the thermal fuse and following proper testing procedures, you can quickly identify and replace it if necessary, ensuring your dryer operates safely and efficiently.

7. Issues with the Start Switch

When a Whirlpool dryer fails to spin, the start switch could be the culprit, preventing the drum from spinning altogether. Issues may arise due to wear and tear or faulty internal mechanisms within the switch itself. To diagnose the problem, use a multimeter for testing continuity, checking for a faulty start switch that needs replacement.

  • Wear and tear over time can lead to loose or worn-out start switches.
  • Faulty internal mechanisms within the switch can occur due to manufacturing defects or regular usage.
  • Use a multimeter to test continuity by touching probes on switch terminals while pressing the button.

Preventing Whirlpool dryer repair  issues related to the start switch involves regular maintenance and care. Avoid excessive force when using the button and watch for unusual sounds or resistance, which may indicate underlying problems. Understanding common switch issues helps in troubleshooting before seeking professional assistance or replacing the switch if necessary.

8. Faulty Timer or Control Board

A faulty timer or control board can disrupt your Whirlpool dryer’s spinning function, as these components regulate its operations. Signs of malfunction include unresponsiveness to control panel commands and affected features like temperature control.

  • Malfunctioning timer or control board can cause spinning issues.
  • Symptoms include unresponsiveness and affected features like temperature control.
  • Check for visible damage like burn marks or loose connections on these components.

Diagnosing and repairing timer or control board issues require technical expertise and specialized tools. Consult a professional technician for accurate diagnosis and repair.


The whirlpool dryer not spinning can be attributed to various factors that require attention and troubleshooting. By understanding the common issues such as a broken drive belt, faulty door switch, worn-out drum rollers or glides, malfunctioning motor, faulty idler pulley, burned-out thermal fuse, issues with the start switch, and faulty timer or control board, you can effectively diagnose and resolve the problem.

It is important to regularly inspect and maintain your whirlpool dryer to prevent spin issues from arising. Simple measures like checking for signs of wear on drum rollers and glides can help identify potential problems before they become major concerns.

By following appropriate troubleshooting steps specific to your model of Whirlpool dryer, you can often fix spin-related problems at home without incurring significant costs. While encountering spin issues in your Whirlpool dryer may initially seem daunting, thorough troubleshooting and a little know-how can get you back on track.


What are common reasons for a Whirlpool dryer not spinning adequately?

Common reasons for a Whirlpool dryer not spinning adequately include issues with the drive belt, idler pulley, drum rollers, defective door switch, motor engagement problems, or faulty drum glides and bearings.

Can I troubleshoot problems with the drive belt, idler pulley, or drum rollers on my own?

Yes, you can troubleshoot problems with the drive belt, idler pulley, or drum rollers on your own. Check for wear, damage, or misalignment. If any of these components are faulty, they can usually be replaced by following the instructions in the appliance manual. Ensure the dryer is unplugged before attempting any repairs.

Are there DIY solutions for issues related to a defective door switch or motor not engaging?

Certainly, there are DIY solutions for issues related to a defective door switch or motor not engaging. Test the door switch for continuity using a multimeter and replace it if needed. Check the motor for proper functioning and replace it if necessary. Always disconnect the power before working on the appliance.

How should I address problems arising from the drum glides or bearings causing the drum to not spin?

To address problems arising from drum glides or bearings causing the drum not to spin, inspect these components for wear or damage. Replace any worn or faulty parts. The appliance manual should provide guidance on accessing and replacing these components.

When is it advisable to consult with a professional for Whirlpool dryer spinning issues?

It is advisable to consult with a professional for Whirlpool dryer spinning issues if DIY troubleshooting and solutions are unsuccessful, or if the problem involves complex internal components. Professionals can provide accurate diagnosis and ensure that repairs are performed safely and effectively

Share This Article

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top
Open chat
Scan the code
Get A Pro Chat *LIVE Agent*
Thank you for contacting Get A Pro! In a few words, let us know how we can help you. Please allow us 90 seconds to connect you to our live team member.