Whirlpool Electric Stove Not Working – 7 Steps To Solve

Whirlpool Electric Stove Not Working - 7 Steps To Solve
Table of Contents

Strengthen your proficiency in stove or cooktop repair with insightful articles such as

12 Common Whirlpool Stove & Cooktop Problems and How to Fix Them

Whirlpool Stove or Cooktop Burner Is Not Working – Repair Guide

What To Do When a Whirlpool Stove or Cooktop Doesn’t Turn ON

1. Check Power Supply

checking the power supply. Here’s a step-by-step guide:

  • Verify the stove is securely plugged into an outlet, as loose plugs can cause issues.
  • Check for tripped circuit breakers or blown fuses in the electrical panel; resetting or replacing them may fix power-related problems.
  • Use a multimeter to measure voltage at the outlet; a functional outlet should read around 120 volts.
  • If there’s no voltage or a significantly low reading, it may indicate a problem with your home’s electrical system, requiring professional attention.
  • Prioritize safety; if uncomfortable with electrical work, seek assistance from a professional stove repair technician.

When an electric stove isn’t heating up or turning on, start by ensuring it’s properly plugged in and investigate circuit breakers or fuses. Use a multimeter to check outlet voltage for irregularities. 

2. Examine the Burner Elements

The burner elements are essential components of your Whirlpool electric stove, responsible for heating. If you notice issues like inadequate heating or non-functioning burners, examining these elements can help pinpoint the problem. Follow these steps for effective troubleshooting:

  • Safety First: Turn off the stove’s power supply to prevent accidents or shocks.
  • Visual Inspection: Check for visible damage like cracks or breaks in the coil of each burner element.
  • Discoloration Check: Look for any discoloration or blackening on the surface of the elements.
  • Infinite Switch Test: Use a multimeter to test the infinite switch behind the control panel. Check for continuity when the switch is on and none when it’s off.
  • Power Supply Check: Ensure adequate power reaches the stove by testing other appliances in different outlets.
  • Maintenance Practices: Avoid placing heavy pots directly on the elements to prevent damage and maintain efficiency.

3. Assess the Control Knobs and Switches

Assessing the control knobs and switches is crucial for troubleshooting a malfunctioning Whirlpool stove. These components regulate heat and power delivery to the burners, so any malfunction can significantly affect stove performance.

  • Start by examining control knobs for visible signs of damage or wear, such as cracks or loose connections.
  • Ensure knobs are properly aligned with settings on the control panel.
  • Evaluate switches regulating power flow to each burner by testing continuity with a multimeter.

Turn off the stove and unplug it for safety. Test each switch’s continuity in the “on” position; lack of continuity indicates a faulty switch requiring replacement. Infinite switch troubleshooting is essential, as it controls temperature levels by adjusting electrical resistance within its mechanism. If issues persist, further inspection with recommended tools may be necessary.

Thoroughly assessing control knobs and switches helps identify malfunctions causing stove dysfunction. Taking proactive steps to resolve these issues restores functionality and prevents future problems.

4. Check the Terminal Block and Wiring

When troubleshooting issues with your Whirlpool electric stove, one potential culprit to check is the terminal block and wiring. Here’s how:

Terminal Block Examination

  • Start by disconnecting the stove from its power source for safety.
  • Locate the terminal block at the back of the stove, often behind a removable metal plate.
  • Inspect each connection point for damage or corrosion.
  • Tighten any loose wires using appropriate tools like pliers.
  • Look for burned spots, indicating potential issues with electrical flow, and consider replacing damaged parts.
  • Ensure all wires are securely connected and not frayed or exposed.

Wiring Inspection

  • Visually examine all visible wires for damage such as cuts or burns.
  • Damaged wires should be replaced by a professional repair technician to prevent safety hazards.
  • Checking both the terminal block and wiring can help identify faulty connections causing your stove’s issues. Promptly addressing these problems can prevent further damage and costly repairs.

5. Evaluate the Surface Element Board

The Surface Element Board in your Whirlpool Stove plays a vital role in distributing and controlling heat from the burner elements. To troubleshoot stove issues effectively:

  • Begin by disconnecting the power supply to the stove for safety.
  • Locate the Surface Element Board, usually at the rear beneath a cover.
  • Visually inspect for damage, burnt-out areas, or loose connections.
  • Check terminal blocks for secure fastening and cleanliness to ensure proper electrical contact.

Use recommended tools like a multimeter to test each surface element individually:

  • Temporarily restore power for testing.
  • Detach one wire from each surface element connector.
  • Use the multimeter to check for continuity across each element’s terminals.
  • Lack of continuity indicates a faulty surface element requiring replacement.

Perform necessary repairs or replacements to resolve stove malfunctions effectively. If troubleshooting doesn’t work or if you’re uncomfortable with DIY repairs, seek professional help from experienced stove repair technicians for expert diagnosis and resolution

6. Inspect the Electronic Control Board

  • The electronic control board is crucial for the functionality of a Whirlpool stove, serving as the command center for relaying signals to various components.
  • Malfunctions in this component can lead to issues like the stove not working or heating up properly.

Troubleshooting Steps

  • Begin by disconnecting the power supply for safety.
  • Carefully remove the back panel of the stove to access the control board.
  • Inspect the control board for visible signs of damage such as burnt marks or loose connections, using a flashlight for better visibility.
  • Examine the wiring harness connected to the control board for loose or disconnected wires.
  • Reattach any loose connections securely and check for frayed or damaged wires that may need repair or replacement.

7. Contact a Professional Stove Repairman

While some problems can be resolved through DIY methods or simple tools, issues like surface element board faults or electronic control board malfunctions require expert intervention. Professional repairmen utilize specialized tools and knowledge to efficiently diagnose and resolve these complex issues, ensuring optimal stove performance.

  • Professionals can identify and rectify faults in the surface element board, crucial for controlling heating elements.
  • Faulty connections or short circuits within the board can cause irregular heating or burner failure.
  • Trained technicians can address issues with the electronic control board, responsible for regulating stove functions.
  • Damages or glitches in this component can lead to stove malfunctioning or failure to turn on.


Troubleshooting and fixing electric stove issues can be a daunting task, but by following the seven steps outlined in this article, you can effectively address common problems that may arise with your Whirlpool electric stove. By starting with checking the power supply and ensuring that the burner elements are functioning properly, you have already taken important initial steps in identifying and resolving issues.

By following these recommended steps for Whirlpool stove troubleshooting and adhering to proper stove maintenance tips in your day-to-day usage of your electric stove, you can greatly reduce the likelihood of encountering future malfunctions or breakdowns. Regularly cleaning the burners and control knobs while avoiding spills or excessive moisture around electrical components will go a long way in maintaining optimal functionality.

Ultimately, with these effective solutions at hand alongside preventative measures, you can ensure that your Whirlpool electric stove remains reliable for years to come. Remember: A well-maintained stove not only enhances culinary experiences but also brings convenience and joy into every kitchen endeavor.


What are common problems for a Whirlpool stove not operating properly?

Issues with electronic controls, power supply, thermostat settings, or malfunctioning burner elements can affect the operation of a Whirlpool electric stove.

Can I troubleshoot and resolve issues with the stove’s electronic controls or power supply independently?

Basic troubleshooting, such as checking power connections, resetting electronic controls, or inspecting circuit breakers, can be attempted independently.

Are there DIY solutions for problems related to faulty thermostat settings or burner elements?

Adjusting thermostat settings or replacing faulty burner elements may have DIY solutions, but complex electrical issues might require professional intervention.

How do I address issues when the stove doesn’t respond to the control panel or fails to reach the set temperature?

Checking for power supply, ensuring proper control panel connections, and verifying thermostat settings are initial steps. If problems persist, consulting a professional is recommended.

When is it advisable to consult with a professional for Whirlpool stove issues?

If DIY efforts don’t resolve the issue, especially concerning electronic components or power supply, seeking assistance from a qualified technician is advisable for accurate diagnosis and safe repairs.

Share This Article

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top
Open chat
Scan the code
Get A Pro Chat *LIVE Agent*
Thank you for contacting Get A Pro! In a few words, let us know how we can help you. Please allow us 90 seconds to connect you to our live team member.