Get-A-Pro-Appliance-Repair-Logo-300x80

Why Does Your Whirlpool Oven Not Heating but Stove Top Is

Why Does Your Whirlpool Oven Not Heating but Stove Top Is
Table of Contents

Strengthen your know-how in oven repair with resources such as

15 Common Whirlpool Oven Problems and How to Fix Them

What To Do When A Whirlpool Oven Won’t Hold Temperature

7 Reasons Why Self Clean Not Working On Whirlpool Oven

1. Oven Element Issues

  • One primary reason for a Whirlpool oven not heating while the stove top functions normally is due to oven element problems.

The oven element, or bake element, generates heat within the oven cavity but can wear out or get damaged over time.

Troubleshooting Steps

  • Visual Inspection: Check the element for visible damage like cracks or breaks; if found, it likely needs replacement.
  • Multimeter Test: Use a multimeter to test the element’s continuity.
  • Set the multimeter to measure resistance and touch each probe on the element terminals.
  • No continuity or high resistance indicates a faulty element requiring replacement.

Thermal Fuse Problems

  • Thermal fuse issues can also cause Whirlpool ovens to not heat properly.
  • The thermal fuse acts as a safety device, shutting off power to heating elements if they get too hot.

Testing and Replacement

  • Locate the thermal fuse in the oven’s wiring diagram and use an ohmmeter to test its continuity.
  • A reading of infinity signifies a blown thermal fuse necessitating replacement.
  • Frequent blowing of the thermal fuse may signal underlying issues like ventilation problems or excessive heat buildup.

By addressing these common causes of Whirlpool oven heating issues related to oven element and thermal fuse problems, you’ll be on the path to restoring optimal functionality in your kitchen appliance.

2. Oven Igniter Problems (Gas Models)

Gas ovens face unique heating issues, often stemming from a malfunctioning igniter. Here’s what you need to know:

  • Crucial Role of Igniter: The igniter is essential for igniting the gas to generate heat for cooking. If it fails, your Whirlpool oven won’t heat up.
  • Signs of Igniter Problems: If you smell gas but the oven doesn’t heat, or if the igniter fails to glow, it could indicate an issue.
  • Possible Causes: The igniter might be faulty or not receiving enough electrical current. Wear and tear can also affect its temperature.

Troubleshooting Steps

  • Check power supply: Ensure other electrical components work fine.
  • Inspect the igniter: Look for visible damages and test continuity with an ohmmeter.

3. Faulty Temperature Sensor

A faulty temperature sensor can cause a Whirlpool oven to fail to heat while the stove top functions properly. This sensor is vital for detecting and monitoring the oven’s internal temperature, relaying data to the control board to regulate heating elements. When the sensor malfunctions, it can lead to inaccurate readings or no heating at all.

Troubleshooting Steps

  • Check for physical damage or disconnection of the temperature sensor.
  • Inspect wiring and connections for signs of wear or looseness.
  • Use a multimeter to test for continuity in the sensor circuitry if external inspection shows no issues.
  • Residue or grease build-up on the sensor can affect accuracy. Clean it thoroughly with a gentle cleanser and a soft cloth or sponge.

If troubleshooting and cleaning efforts fail, replacing the sensor may be necessary. Professional Whirlpool oven repair services can efficiently identify and address any underlying sensor issues.

4. Baking Element Malfunction

When your Whirlpool oven isn’t heating but the stove top functions normally, a possible culprit is a malfunctioning baking element, responsible for generating heat in the oven cavity.

Identifying Issues

  • A common problem with baking elements is a break in the wire connection, often due to regular use and exposure to high temperatures.
  • Visible signs of damage on the element’s surface, like cracks or bulges, indicate potential issues requiring replacement.

Troubleshooting Steps

  • Turn off the power and unplug the oven.
  • Inspect both ends of the element for wear or damage.
  • If wire connections or physical defects are found, replacement is likely necessary.
  • Refer to the oven’s manual for specific instructions on replacement parts.

Considerations

  • Replacing a baking element typically requires technical expertise.
  • If unsure, seek professional Whirlpool oven repair assistance to avoid complications.

5. Oven Control Board Issues

Check for Error Codes

  • Look for error codes on the digital panel, which can offer clues to the issue.
  • Consult the Whirlpool oven manual or online resources to interpret the codes and follow recommended steps.

Inspect Control Board

  • If no error codes appear but the oven still doesn’t heat, examine the control board for visible damage or malfunctions.
  • Check for burnt-out components, loose connections, or signs of electrical shorts.
  • Ensure to cut off power before any repair attempts.

Exercise Caution

  • If comfortable and knowledgeable, you may try repairing or replacing faulty parts on the control board.
  • However, working with electrical components can be hazardous without proper expertise.

6. Thermal Fuse Problems

The thermal fuse acts as a safety feature to prevent overheating, blowing and interrupting the electrical circuit if it detects excessively high temperatures.

Troubleshooting Steps

  • Locate the thermal fuse in the control panel or behind the rear panel and visually inspect it for damage or burn marks.
  • If there are signs of damage like a blown appearance or melted wires, replacement is necessary.
  • Before replacing, address any underlying issues like thermostat problems, as they can cause heat buildup and trigger the fuse.

Additional Checks

  • Verify the oven door seal for damages or gaps, as poor sealing can lead to temperature fluctuations.
  • Properly sealing the door maintains consistent temperatures and prevents strain on components like fuses.

If your Whirlpool oven isn’t heating while the stove top functions, check for thermal fuse issues. Inspect for physical damage before replacing, and resolve any underlying causes like faulty thermostats or damaged door seals to prevent future heating problems. If unsure, seek professional repair assistance for optimal oven performance.

7. Wiring or Electrical Problems

Faulty Heating Element

  • Heating elements can wear out or get damaged over time, leading to the oven not heating properly.
  • Perform a visual inspection by turning off the power, removing the back panel, and checking for cracks, blisters, or burns on the element.
  • If abnormalities are found, consider installing a new heating element.

Loose or Damaged Wiring

  • Loose connections or damaged wires within the internal wiring system can also cause heating issues.
  • Disconnect the power and carefully inspect all connections for damage or disconnection.
  • Tighten loose connections with appropriate tools, but consult a professional if you encounter damaged wires.

When troubleshooting why your Whirlpool oven isn’t heating while the stove top works, consider wiring or electrical problems. Faulty heating elements or damaged wires can disrupt power flow, preventing the oven from reaching the desired temperature.

8. Gas Oven Specific Issues (Gas Models)

Gas ovens, like electric ones, can face issues where the stove top functions but the oven fails to heat up. Identifying these specific gas oven problems is key to effective troubleshooting and resolution.

Faulty Igniter

  • The igniter initiates combustion by producing a spark or heating up to ignite the gas.
  • If it fails, the oven won’t heat, and you may notice no glow or spark when turning it on.
  • Replacing the igniter typically resolves this issue. If unsure, contact a professional Whirlpool oven repair service for assistance.

Malfunctioning Gas Valve

  • The gas valve regulates gas flow into the burner assembly.
  • Issues like clogs or damage can prevent proper function, leading to failure to ignite the burner.
  • If no clicking sound is heard when turning on the oven, it may indicate a faulty gas valve.
  • Repair involving valves or internal components should be left to trained professionals for safety.

Understanding these gas oven-specific issues helps diagnose why the stove top may work but the Whirlpool oven doesn’t heat properly. However, faulty igniters and malfunctioning gas valves are just two potential causes among several others. 

9. Oven Door Seal Damages

Made of rubber or silicone, the seal maintains the oven’s temperature by preventing heat loss. Over time, seals can wear out or become damaged, leading to longer cooking times or unevenly cooked food. Inspecting the seal for tears, cracks, or gaps is the first step, followed by replacement if necessary.

  • Damaged door seals can cause heat loss and affect oven performance.
  • Inspect the seal for tears, cracks, or gaps.
  • To replace, turn off power and gas supply, remove screws securing the old seal, and install the new one securely.
  • Test the newly installed seal by running a brief heating cycle.
  • For professional assistance, contact a licensed Whirlpool oven repair service.

10. Power Supply or Outlet Problems

Power supply or outlet problems are common causes of a Whirlpool oven not heating while the stove top is working.

Adequate power supply is essential for proper oven functionality, and interruptions or voltage fluctuations can disrupt heating.

Troubleshooting Steps

  • Check the power cord’s connection to ensure it’s securely plugged into a functioning electrical outlet.
  • If the connection is loose, try another outlet to see if it resolves the issue.
  • Inspect the power cord for visible damages such as cuts or frayed wires that may disrupt electricity flow.
  • Circuit or breaker problems can also affect the oven’s heating ability.
  • Ovens typically require a dedicated electrical circuit with sufficient voltage and amperage capacity.
  • Excessive power draw from other appliances sharing the same circuit can overload it and prevent the oven from heating properly.

Steps to Address Circuit Issues

  • Locate the home’s electrical panel and check for tripped breakers related to the kitchen or oven circuits.
  • Resetting a tripped breaker may restore power to the oven and resolve heating problems.

11. Appliance Control Settings

When dealing with a Whirlpool oven that isn’t heating, the first step is to check the appliance control settings. Often, incorrect settings or mode selections are to blame for this frustrating problem. It’s crucial to ensure that the oven settings are properly configured for heating functionality.

  • Consult the User Manual: Start by referring to your Whirlpool oven’s user manual for instructions on accessing and navigating the control panel settings. Get familiar with different modes like bake, broil, convection, and self-cleaning functions.
  • Verify Cooking Mode: Make sure you’ve selected the appropriate cooking mode for your task. Sometimes, inadvertently activating a delay start feature can be the issue.
  • Check for Delay Start Feature: This feature allows automatic cooking at a set time. However, if activated incorrectly, it can prevent the oven from heating while the stove top works. Double-check for any unintentionally set delay start options and adjust them as needed.

12. Thermostat Issues

The thermostat regulates the oven’s temperature, ensuring it reaches and maintains the desired heat level. If the thermostat malfunctions or becomes inaccurate, heating problems can occur, often due to faulty calibration.

Common Thermostat Issues

  • Faulty calibration is a typical problem, causing the thermostat to misalign over time.
  • Symptoms include the oven not reaching the desired temperature or overheating food, impacting cooking results.

Troubleshooting Steps

  • Refer to the appliance manual for instructions on accessing and adjusting calibration settings.
  • Typically, you’ll need to remove a small panel near the control knobs to access the temperature adjustment screw.
  • Use a screwdriver to rotate the screw slightly until accurate temperatures are achieved.

Further Action

  • If recalibration doesn’t fix the issue or if other thermostat problems persist (like uneven heating), consider replacing the entire thermostat assembly.
  • This task requires careful disassembly and is best handled by a professional technician experienced with Whirlpool ovens.

Thermostat issues can cause your Whirlpool oven to malfunction while the stove top works fine. Faulty calibration can lead to inaccurate temperature readings, affecting cooking quality. Recalibration may help with minor issues, but seeking professional assistance is recommended for accurate diagnosis and repair of your oven’s thermostat system.

13. Malfunctioning Gas Valve (Gas Models)

In gas models, a faulty gas valve can cause your Whirlpool oven to fail in heating while the stove top works fine. The gas valve regulates gas flow into the oven for ignition and heating. Common issues with the gas valve include blockages or damage, leading to improper oven function.

Clogged or Blocked Valve

  • Debris or residue buildup can obstruct gas flow through the valve.
  • This accumulation over time can hinder proper oven heating.

Faulty Valve Operation

  • If the valve is damaged or faulty, it may not open or close correctly.
  • This results in inadequate or no gas flow to the burner, causing the oven to fail in heating.

To troubleshoot, inspect the gas valve for visible damage or blockage. Clean any debris thoroughly using suitable cleaning solutions and tools. However, if there’s suspicion of internal valve issues, seek professional assistance from qualified Whirlpool oven technicians.

14. Circuit or Breaker Problems

The electrical circuit powering your oven includes a breaker, a safety device against electrical overloads. If the breaker trips or there’s a fault in the circuit, it disrupts power supply to the oven.

  • Begin troubleshooting by checking the circuit breaker panel and locating the oven’s breaker. Reset it if tripped, even if it doesn’t show visible signs.
  • Inspect wiring between the oven and panel for damages or loose connections that could interrupt power flow.
  • Test other nearby appliances to identify broader power supply issues.

Older homes may have insufficient wiring capacity for modern appliances, leading to frequent breaker trips. Consult an electrician for possible system upgrades.

Contact Professional Whirlpool Oven Repair

  • While DIY solutions can help, complex issues may require professional assistance.
  • Contact professionals if DIY attempts fail or if dealing with electrical components is uncomfortable.
  • Trained technicians have the expertise and tools to efficiently diagnose and repair Whirlpool ovens, ensuring timely resolution.

Here at Get A Pro, we serve over 50 appliance brands over the Greater Toronto Area and nearby regions including Barrie, Oshawa, Burlington, and Vaughan. Book a service call with one of our Whirlpool oven specialists the same or next day!

Contact us at our toll-free number 1-800-498-4490 or fill-out our contact form and we will get back to you during business hours.

Conclusion

After exploring the various potential causes for a Whirlpool oven not heating while the stove top remains functional, it is essential to consider the troubleshooting steps and potential solutions available. When encountering issues such as oven element problems, faulty temperature sensors, baking element malfunctions, or thermal fuse problems, there are certain actions one can take to address these concerns. 

When all else fails and DIY efforts prove futile in resolving an oven’s heating woes, it is advisable to contact professional Whirlpool oven repair services. These experts possess comprehensive knowledge and experience in diagnosing and fixing intricate appliance problems efficiently.

Remember, with the right tools, patience, and perseverance, many of these issues can be resolved without the need for professional assistance. However, in cases where complexities arise or repairs seem beyond your grasp, do not hesitate to seek the expertise of Whirlpool oven repair professionals who can swiftly bring your appliance back to its full functionality, ensuring you can once again savor delectable creations from your culinary endeavors.

FAQs

What are typical reasons for the oven component of a Whirlpool range not heating up?

Oven heating issues in a Whirlpool range could result from a malfunctioning heating element, thermostat, electronic controls, or problems with bake/broil elements.

Can I troubleshoot and resolve issues with the oven’s heating element or thermostat on my own?

Basic troubleshooting involves visually inspecting the heating element for signs of damage or testing the thermostat’s calibration. However, for intricate repairs, it’s advisable to seek professional assistance.

Are there DIY solutions for problems related to electronic control malfunctions or issues with bake/broil elements?

While basic inspection and resetting electronic controls may help, addressing complex issues with bake/broil elements often requires professional expertise to ensure accurate diagnosis and repair.

How do I address issues when the oven door doesn’t seal properly or there are malfunctions in the temperature sensor?

Adjusting or replacing the oven door gasket can resolve sealing issues, and visual inspection of the temperature sensor for damage is possible. For precise repairs, involving a professional technician is recommended.

When should I involve a professional in fixing Whirlpool oven and stove top heating issues?

If basic troubleshooting doesn’t resolve the problem or if there’s a need to replace intricate components, seeking professional assistance ensures a thorough diagnosis and effective resolution of heating issues

Share This Article

Leave a Comment

Your email address will not be published. Required fields are marked *

FOLLOW US
BOOK SERVICE ONLINE
OTHER POSTS
Scroll to Top
Open chat
1
Scan the code
Get A Pro Chat *LIVE Agent*
Thank you for contacting Get A Pro! In a few words, let us know how we can help you. Please allow us 90 seconds to connect you to our live team member.