7 Reasons Why Self Clean Not Working On Whirlpool Oven

7 Reasons Why Self Clean Not Working On Whirlpool Oven
Table of Contents

Elevate your skills in oven repairs with helpful articles like

15 Common Whirlpool Oven Problems and How to Fix Them

7 Reasons Why a Whirlpool Oven Not Heating Up

Why Does Your Whirlpool Oven Not Heating but Stove Top Is

1. Door Lock Mechanism Issues

Possible Causes

When it comes to self-cleaning issues in Whirlpool ovens, there are several possible causes to consider. One common culprit is a faulty temperature sensor, responsible for monitoring the oven’s internal temperature and relaying information to the control board. 

This malfunction can disrupt the self-cleaning process, preventing the oven from reaching the necessary high heat or causing premature cycle termination. Another potential cause is a faulty thermal fuse, a safety device that cuts off power in case of excessive heat buildup.

Temperature Sensor Problems

  • Check for visible damage or loose connections on the sensor.
  • Test sensor resistance with an ohmmeter and replace if faulty.

Thermal Fuse Failure

  • Locate and access the thermal fuse near the rear of the oven.
  • Use a multimeter to test for continuity across its terminals; replace if no continuity is detected.


When troubleshooting a malfunctioning self-cleaning feature on your Whirlpool oven, it’s crucial to address potential issues with the control board and power supply.

Control Board Malfunction

  • The control board regulates oven functions, including self-cleaning.
  • A faulty control board can cause the self-clean feature to malfunction.
  • Resetting the control board by disconnecting power for five minutes may resolve electronic glitches.

Insufficient Power Supply

  • The self-cleaning cycle requires significant power to operate effectively.
  • Insufficient electricity can lead to incomplete or unsuccessful self-cleaning.
  • Troubleshoot by trying a different outlet or ensuring no high-power appliances are running simultaneously.

If resetting the control board or adjusting the power supply doesn’t resolve the issue, further action such as replacing the control board or consulting an electrician may be necessary to address the malfunctioning self-cleaning feature

2. Temperature Sensor Problems

Possible Causes

Insufficient power supply is a common issue affecting Whirlpool ovens during self-cleaning cycles. Here’s how to troubleshoot and address this problem effectively:

Causes of Insufficient Power Supply

  • Faulty electrical outlet or circuit breaker may not provide adequate electricity.
  • Shared electrical circuits with other appliances can lead to reduced power supply.

Preventive Measures

  • Ensure the outlet used for the oven has the correct voltage and amperage rating.
  • Avoid simultaneous usage of high-powered appliances on the same circuit.
  • Consider redistributing circuits to balance electrical load if needed.


Here are the solutions for troubleshooting temperature sensor issues with your Whirlpool oven, summarized into bullet points:

Door Lock Mechanism Issues

  • Ensure latch isn’t obstructed and clean any debris around it.
  • If problem persists, consider replacing the door lock assembly.

Temperature Sensor Problems

  • Check sensor connection and cleanliness; clean if necessary.
  • Recalibrate or replace sensor for accurate readings during self-cleaning cycles.

Faulty Thermal Fuse

  • Turn off power supply before repairs.
  • Test thermal fuse continuity using a multimeter; replace if blown.

Malfunctioning Control Board

  • Check connections and reset power.
  • Consider replacing control board if issues persist after resetting.

Damaged Door Gasket Seal

  • Inspect for tears or deformations along the seal.
  • Replace damaged seal to ensure proper sealing during self-cleaning.

Always refer to the oven’s user manual for specific instructions and safety precautions. If unsure, seek professional assistance from a qualified technician specializing in Whirlpool appliances

3. Faulty Thermal Fuse

Possible Causes

When it comes to Whirlpool oven thermal fuse malfunctions, several potential causes could be at play, requiring effective troubleshooting for resolution.

  1. Door Lock Mechanism Issues:
  2. Temperature Sensor Problems:

Understanding these issues is vital for pinpointing and resolving Whirlpool oven self-clean failures efficiently. By addressing these causes diligently, users can prevent persistent issues and ensure optimal performance during future cleaning cycles


Door Lock Mechanism Issues

  • Ensure nothing obstructs the mechanism. Clean away debris or food particles.
  • Consider replacing the door lock assembly if the issue persists.

Temperature Sensor Problems

  • Use an ohmmeter to test sensor resistance.
  • Replace the sensor if it deviates significantly from the expected range.

Faulty Thermal Fuse

  • Check continuity with a multimeter. Replace if no continuity is detected.
  • Note that a blown fuse could indicate other underlying issues.

Malfunctioning Control Board

  • Inspect for damage such as burnt circuits or loose connections.
  • Repair, replace, or reset/recalibrate the board as needed.

4. Malfunctioning Control Board

Possible Causes

  • The self-clean function on your Whirlpool oven may not be working properly due to several reasons.
  • Common culprits include issues with the door lock mechanism and problems with the temperature sensor.

Door Lock Mechanism Issues

  • The door lock mechanism secures the oven door during self-cleaning.
  • Debris or residue around the lock area can hinder its functionality.
  • Cleaning or replacing the door lock assembly may be necessary if obstructions persist.

Temperature Sensor Problems

  • The temperature sensor monitors and regulates the oven’s internal temperature.
  • A faulty or inaccurate sensor can disrupt the self-clean cycle.
  • Consider replacing the temperature sensor after confirming its malfunction through diagnostic tests.


  • One common reason for the self-clean function not working on Whirlpool ovens is door lock mechanism issues, preventing the cleaning process from initiating.
  • Troubleshoot by inspecting the door latch assembly for damage or obstruction, and clean any debris.
  • Check for loose connections or wires affecting the mechanism’s performance and refer to the manual for adjustment or replacement instructions.
  • Temperature sensor problems can also cause self-clean malfunctions by preventing the oven from reaching required high temperatures.
  • Clean the temperature sensor probe to remove residue or grease buildup, and consider replacing it if cleaning doesn’t solve the issue.

Key Takeaways

  • Regular maintenance and cleaning of oven components like the door latch assembly and temperature sensor probe can prevent self-clean issues.
  • If troubleshooting doesn’t work, seek professional assistance or contact Whirlpool’s customer support for guidance, ensuring safety precautions are followed during repairs or replacements.

5. Door Gasket Seal is Damaged

Possible Causes

  • Regular wear and tear
  • Physical damage
  • Bad seal between the door and the door frame


Replace Damaged Door Gasket Seal

  • A compromised seal can prevent effective self-cleaning; replace promptly.
  • Refer to manufacturer instructions or consult a professional for proper replacement.

6. Insufficient Power Supply

Possible Causes

  • Oven temperature sensor issues: The temperature sensor regulates the oven’s internal temperature during the self-clean cycle. Malfunctions or damage to this sensor can prevent accurate temperature readings, leading to ineffective self-cleaning.
  • Electronic control panel glitches: The control panel initiates and controls oven functions, including self-cleaning. Glitches or malfunctions can disrupt communication with other components, resulting in errors or failure to activate the self-clean cycle.
  • Breaker issues: As straightforward as it sounds, a bad breaker or a worn out breaker can lead to insufficient power supply to your whirlpool oven


  • Reset door switch/latch and handle door gently to prevent mechanism issues.
  • Check sensor probe for damage or corrosion; clean surrounding area.
  • Replace faulty thermal fuse if disrupting self-clean mode.
  • Consider replacing malfunctioning control boards if necessary.
  • Replace damaged door gasket seals for proper insulation during self-clean cycles.
  • Ensure adequate power supply and address electrical problems if needed.
  • Consult professionals for electronic control panel glitches.
  • Follow the user manual for specific instructions and seek professional help when necessary.
  • Call a certified and insured electrician to help you with your breaker problems if necessary.

7. Electronic Control Panel Glitches

Possible Causes

  • Insufficient power supply can hinder self-cleaning cycles in Whirlpool ovens.
  • Thermal fuse failure may disrupt the electrical circuits required for high-temperature self-cleaning.


  • Reset the breaker by simpoly turning it off and back on again.
  • If that doesn’t help, try to factory reset the oven by following the instructions on the user manual. 
  • In case it doesn’t work, carefully inspect for loose or worn out wires on the control panel that could cause this issue in the first place
  • Call a professional whirlpool oven repair company in the greater toronto area


Troubleshooting self-clean issues with your Whirlpool oven can be a frustrating experience, but armed with the right knowledge and tools, you can overcome these challenges. By addressing common problems such as door lock mechanism issues, temperature sensor problems, faulty thermal fuse, malfunctioning control board, damaged door gasket seal, insufficient power supply, and electronic control panel glitches head-on, you can restore your oven’s self-cleaning functionality. 

While encountering self-clean problems with your Whirlpool oven can be frustrating, taking a systematic approach to troubleshoot and address these issues can lead to successful resolution. By following the recommended steps and seeking professional help when needed, you can enjoy the convenience and benefits of a properly functioning self-cleaning oven once again.

Remember to maintain regular maintenance practices and exercise caution when performing any repairs to prevent further damage or safety hazards. With patience and determination, you will overcome these challenges and restore your Whirlpool oven’s self-clean feature effortlessly.


What are common reasons for the self-clean feature of a Whirlpool oven malfunctioning?

Issues with the self-clean feature in a Whirlpool oven can arise from malfunctioning door locks, electronic controls, or problems with the temperature sensor.

Can I troubleshoot and resolve issues with the oven’s self-clean function independently?

Basic troubleshooting may involve inspecting door locks, resetting electronic controls, or checking the temperature sensor. However, for intricate problems, it’s advisable to consult a professional technician.

Are there DIY solutions for problems related to malfunctioning door locks or electronic controls?

While basic inspection and resetting may help with door locks and electronic controls, precise repairs often require the expertise of a professional to ensure safety and proper functionality.

How do I handle issues when the oven door doesn’t seal properly or there are malfunctions in the temperature sensor during self-clean?

Adjusting or replacing the oven door gasket can address sealing issues, and visually inspecting the temperature sensor for damage is possible. For accurate repairs, involving a professional technician is recommended.

When is it advisable to consult with a professional for Whirlpool oven self-clean feature problems?

Call for professional assistance if basic troubleshooting doesn’t resolve the issue or for intricate problems to ensure a thorough diagnosis and effective resolution of self-clean feature malfunctions.

Share This Article

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top
Open chat
Scan the code
Get A Pro Chat *LIVE Agent*
Thank you for contacting Get A Pro! In a few words, let us know how we can help you. Please allow us 90 seconds to connect you to our live team member.