Get-A-Pro-Appliance-Repair-Logo-300x80

How To Troubleshoot a Whirlpool Fridge That Keeps Running

How To Troubleshoot a Whirlpool Fridge That Keeps Running
Table of Contents

Elevate your know-how in refrigerator repairs with informative resources like

15 Common Whirlpool Fridge Problems and How to Fix Them

What To Do When Your Whirlpool Fridge Is Not Defrosting

How To Fix a Whirlpool Refrigerator That Is Leaking Water

Check Thermostat Settings

When troubleshooting a Whirlpool fridge that keeps running, start by checking the thermostat settings. The thermostat regulates the internal temperature, so ensure it’s set within Whirlpool’s recommended range.

  • Locate the thermostat control inside the fridge, usually near the top or on the side wall.
  • Adjust the thermostat to a higher setting if it’s too low to prevent constant running.
  • Factors like warm climates, proximity to heat sources, frequent door openings, or storing warm items affect cooling efficiency.

Regularly examining and adjusting the thermostat settings helps prevent unnecessary strain on the refrigerator’s compressor, prolonging its lifespan.

Examine Refrigerator Door Gaskets

When dealing with a Whirlpool fridge that’s constantly running, check the refrigerator door gaskets. These seals ensure an airtight closure, but wear and tear can cause leaks, making the fridge work harder.

  • Visually inspect gaskets for cracks, tears, or looseness.
  • Clean them regularly with warm water and mild detergent.
  • Avoid harsh chemicals that can damage the gaskets.

Maintaining optimal door seals prevents air leaks, reducing strain on fridge components and promoting energy efficiency.

Clean Condenser Coils

One potential cause for a Whirlpool fridge that keeps running is dirty condenser coils. Over time, these coils accumulate dust, debris, and pet hair, obstructing airflow and making the compressor work harder.

  • Regularly clean condenser coils to maintain optimal performance.
  • Start by unplugging the fridge and locating the coils at the back or underneath.
  • Use a vacuum cleaner with a brush attachment or a coil cleaning brush to gently remove accumulated dirt.
  • Be careful not to damage or bend the coils during cleaning.

Cleaning the condenser coils prevents constant running, enhances energy efficiency, and prevents strain on components like compressors and temperature sensors in your fridge.

Evaluate Fridge Contents

When troubleshooting a Whirlpool fridge that keeps running, evaluate its contents. The organization of food items affects cooling efficiency and may contribute to continuous operation. Monitor running cycles to understand normal behavior and identify potential issues.

  • Ideally, a fridge should run for 40-80% of the time.
  • Constant running indicates a problem that needs attention.

Check thermostat settings to ensure they’re calibrated correctly. Adjusting settings too low can overwork the compressor, leading to excessive energy consumption.

Ensure Proper Ventilation

Proper ventilation is crucial for optimal performance and energy efficiency in your Whirlpool fridge. Here are key points to ensure proper airflow:

  • Clean condenser coils regularly to facilitate efficient heat exchange.
  • Allow ample space around the fridge for air circulation, avoiding obstructions.
  • Monitor running cycles; prolonged running may signal ventilation issues or ice buildup.
  • Defrost the freezer following manufacturer guidelines to address ice accumulation and restore airflow.

By maintaining proper ventilation, you can prevent your Whirlpool refrigerator from running all the time and ensure its performance remains optimal.

Examine Evaporator Fan

The evaporator fan in your Whirlpool refrigerator is vital for maintaining proper temperature levels. If your fridge runs continuously, check the evaporator fan as it may be the issue. Start by unplugging the fridge for safety. Locate the fan and visually inspect it for damage or obstruction.

Clean any debris carefully to ensure smooth operation. Check if the fan rotates freely; any stiffness or noise could indicate a motor or bearing problem. If you find issues, contact Whirlpool support for guidance tailored to your fridge model.

  • The evaporator fan maintains proper temperature levels.
  • Check for damage or obstruction visually.
  • Clean debris carefully and ensure smooth rotation.
  • Contact Whirlpool support for further assistance if needed.

Check for Ice Buildup

Ice buildup in a Whirlpool fridge often causes continuous running, affecting its performance. To troubleshoot:

  • Turn off and unplug the fridge, then defrost the freezer.
  • Organize perishable items and remove food and shelving units.
  • Locate and address ice accumulation on the evaporator coils.
  • Use a hairdryer or natural thawing method to melt ice, avoiding forceful removal.
  • Ensure clear water drainage channels to prevent future buildup.
  • Reassemble and plug in the fridge after confirming complete ice removal.

Regularly addressing ice buildup in your Whirlpool fridge ensures optimal functioning and longevity of the appliance.

Verify Compressor Operation

To ensure your Whirlpool fridge runs efficiently, check the compressor’s operation. It’s like the heart of the fridge, circulating refrigerant for cooling. Listen for unusual noises from the compressor, like loud humming or buzzing, which could signal a problem. If you suspect an issue, contact Whirlpool support or a professional.

  • Listen for unusual compressor noises.
  • Check for vent blockage hindering airflow around the compressor.
  • Clean dust or debris from coils to optimize heat dissipation.

Understanding normal running cycles helps assess compressor performance. Constant running without breaks might indicate a problem. Monitor cycles over a few days to gauge if they’re within normal limits.

  • Monitor running cycles to ensure they align with expectations.
  • Constant running without breaks may signal compressor issues.

Monitor Running Cycles

When dealing with a Whirlpool fridge that runs continuously, monitoring its cycles is key to understanding the issue. Check thermostat settings to find the right balance for proper cooling without overworking the compressor. Familiarize yourself with normal compressor sounds to identify abnormalities like constant buzzing or rattling.

  • Check thermostat settings for proper balance.
  • Learn normal compressor sounds to spot abnormalities.
  • Ensure no vent blockage to prevent overworking the compressor.

To prevent continuous running, ensure proper airflow around the fridge and maintain door seals to minimize energy loss. Regularly inspect and clean condenser coils to maximize heat dissipation and minimize runtime.

Inspect Temperature Sensors

Temperature sensors are essential for maintaining Whirlpool fridge performance. Malfunctioning sensors can lead to continuous operation, impacting efficiency. To inspect:

  • Essential tools: Multimeter and Whirlpool model user manual.
  • Locate sensors near evaporator coils or in freezer compartment.
  • Disconnect wires and test sensor resistance with multimeter.
  • Replace faulty sensors or calibrate per user manual instructions.

Regular inspection and maintenance are vital to prevent constant running issues. Properly functioning sensors ensure accurate temperature control and energy efficiency.

Conclusion

Troubleshooting a Whirlpool fridge that keeps running can be a complex task, but by following the steps outlined in this article, you can effectively identify and resolve the issue. It is essential to begin by checking the thermostat settings and ensuring they are at their optimal level.

Remember that if problems persist or seem too complex to handle on your own, seeking professional assistance from Whirlpool support or authorized technicians is always an option for comprehensive solutions. 

By paying attention to these aspects, you can restore your fridge’s optimal performance, save energy, and prolong its lifespan. With a little effort and attention to detail, you can bid adieu to the constant hum of your refrigerator, knowing that you have successfully resolved this inconvenience.

FAQs

What are common reasons for a Whirlpool fridge running continuously without stopping?

Common reasons for a Whirlpool fridge running continuously include issues with the temperature control, defrost timer, blocked vents, improper airflow, thermostat problems, or malfunctioning condenser coils.

Can I troubleshoot and resolve issues with the temperature control or defrost timer on my own?

Yes, you can troubleshoot and resolve issues with the temperature control or defrost timer on your own. Check for visible damage, test their functionality, and replace components if needed. Follow the user manual or online resources for guidance.

Are there DIY solutions for problems related to blocked vents or improper airflow causing constant running?

Yes, there are DIY solutions for problems related to blocked vents or improper airflow causing constant running. Ensure that vents are not blocked, check for proper ventilation, and clean or replace air filters if necessary.

How do I handle issues with the thermostat or condenser coils not functioning properly?

To handle issues with the thermostat or condenser coils, check for malfunctions, test their functionality, and replace components if needed. Ensure that the condenser coils are clean and not obstructed for optimal cooling efficiency.

When is it advisable to consult with a professional for Whirlpool refrigerator constant running issues?

Consult with an appliance repair company for Whirlpool refrigerator constant running issues if DIY solutions are unsuccessful, or if there are complex issues with components like the thermostat or if you are uncomfortable performing the repairs yourself. Professional technicians can accurately diagnose and fix the problem

Share This Article

Leave a Comment

Your email address will not be published. Required fields are marked *

FOLLOW US
BOOK SERVICE ONLINE
OTHER POSTS
Scroll to Top
Open chat
1
Scan the code
Get A Pro Chat *LIVE Agent*
Thank you for contacting Get A Pro! In a few words, let us know how we can help you. Please allow us 90 seconds to connect you to our live team member.