Get-A-Pro-Appliance-Repair-Logo-300x80

How To Fix a Whirlpool Refrigerator Not Turning ON – 5 Tips

How To Fix a Whirlpool Refrigerator Not Turning ON - 5 Tips
Table of Contents

Broaden your expertise in refrigerator repair with informative resources like

15 Common Whirlpool Fridge Problems and How to Fix Them

Whirlpool Freezer Is Cold But Fridge Is Warm – 7 Pro Tips

How To Repair a Whirlpool Fridge Not Dispensing Water

1. Check the Power Supply

Troubleshooting a Whirlpool refrigerator that won’t turn on starts with checking the power supply. Ensure the appliance is plugged into a working outlet and inspect the power cord for damage. Then, use a multimeter to test the flow of electricity to the fridge. Consult resources like FAQs or the owner’s manual for model-specific guidance on common issues.

  • Check the power supply: Ensure the refrigerator is plugged in and inspect the power cord for damage.
  • Test electricity flow: Use a multimeter to check if electricity is reaching the appliance.
  • Consult resources: Refer to FAQs or the owner’s manual for model-specific troubleshooting guidance.

Verifying and addressing power supply issues lays a foundation for further diagnosis and repair. By following these steps and staying familiar with common troubleshooting techniques, you can increase your chances of fixing the problem quickly.

2. Examine the Refrigerator Controls

Examining the refrigerator controls is essential when troubleshooting a Whirlpool refrigerator that won’t turn on. Start by checking the power supply and inspecting the control panel for any issues. Here’s a simplified breakdown:

  • Ensure the refrigerator is properly plugged in and check for damaged wires.
  • Look for error codes or flashing lights on the control panel.
  • Test each button individually for responsiveness.
  • Try resetting the control panel by unplugging the fridge for 5 minutes.

Thoroughly examining and troubleshooting the control panel can help identify and resolve common issues, getting your Whirlpool fridge back up and running. Utilize Whirlpool’s resources or seek professional assistance if needed.

3. Assess the Refrigerator Door

When troubleshooting a Whirlpool refrigerator that won’t turn on, start by checking the refrigerator door. A faulty door or improper closure can hinder the appliance’s operation.

  • Inspect the door gasket for wear or damage, as it can lead to air leakage affecting cooling.
  • Check for gaps or resistance when closing the door, indicating misalignment or hinge issues.
  • Remove any obstructions blocking the door’s proper closure, such as items too close to the fridge or jammed in the door frame.

Assessing and addressing door-related issues can potentially resolve problems with the refrigerator not turning on. A well-functioning door is vital for maintaining consistent temperature inside the fridge.

4. Clean the Condenser Coils

To maintain your Whirlpool refrigerator’s functionality, regular cleaning of the condenser coils is essential. Accumulated dust and debris can hinder cooling efficiency and even cause the refrigerator not to turn on.

  • Before cleaning, unplug the refrigerator to avoid electrical shock.
  • Locate the condenser coils, typically found at the back or beneath the refrigerator, behind a grille or panel.
  • Use a soft brush or vacuum cleaner to remove visible dirt and debris, avoiding excessive force to prevent damage.
  • For stubborn debris, consider using a coil cleaning brush designed for tight spaces.
  • Blow out remaining dust particles with compressed air or a vacuum cleaner on its lowest setting.

Regular cleaning ensures optimal airflow and prevents common issues associated with dirty condenser coils, maintaining efficient refrigerator performance.

5. Troubleshoot the Refrigerator’s Electrical Components

When troubleshooting electrical issues with your Whirlpool refrigerator, a systematic approach is crucial for effective diagnosis and resolution. Here’s a concise guide to help you through the process:

Test the Start Relay

  • Unplug the refrigerator and locate the start relay near the compressor.
  • Inspect for damage and test using a multimeter for continuity.

Check the Capacitor

  • Locate the capacitor near the compressor and inspect for damage.
  • Use a multimeter in capacitance mode to check its functionality.

Inspect the Compressor

  • Disconnect power and access the compressor, observing for overheating or unusual sounds.
  • Consult a professional if irregularities are detected for further diagnosis and potential replacement.

Remember to prioritize safety by disconnecting power before any repairs and follow Whirlpool refrigerator troubleshooting guidelines for optimal results.

Test the Start Relay

Testing the start relay is crucial when troubleshooting a Whirlpool refrigerator that won’t turn on. Here’s how to do it:

  • Gather Necessary Tools: You’ll need a multimeter capable of measuring continuity and resistance, along with insulated gloves and safety goggles.
  • Locate and Access Start Relay: Find the start relay, usually near the compressor, and detach any connected wires with caution.
  • Test Resistance: Set the multimeter to measure resistance and place probes on each terminal of the start relay.
  • A healthy start relay should show low resistance readings (around 3-10 ohms).
  • Infinite resistance or no reading indicates a faulty start relay that needs replacement.
  • Safety Precautions: Always follow safety protocols, wear protective gear, and ensure the power supply is disconnected before testing.

Testing the start relay with a multimeter helps diagnose whether it’s functioning correctly. If it’s faulty or other electrical components show issues, seek assistance from a professional technician for accurate repair or replacement.

Check the Capacitor

The capacitor in a refrigerator is crucial for starting the compressor. If faulty, it can prevent the fridge from turning on. To troubleshoot:

  • Gather necessary tools: multimeter, insulated gloves, screwdriver.
  • Ensure safety: unplug the refrigerator before inspection.
  • Locate the capacitor near the compressor, check for damage.
  • Use a multimeter to measure capacitance and resistance values.
  • Check for abnormalities and continuity issues.
  • Prioritize safety: wear insulated gloves and disconnect power before repairs.

By testing with a multimeter, you can identify if the capacitor needs replacement or if other issues are causing the refrigerator malfunction. If unsure, consult a professional technician for assistance.

Inspect the Compressor

The compressor is a crucial part of your Whirlpool refrigerator, responsible for maintaining temperature. Follow these steps to inspect it:

  • Unplug the refrigerator to ensure safety.
  • Access the compressor by removing any protective panels.
  • Look for visual signs of damage, such as leaking refrigerant or burnt wires.
  • Test electrical continuity using a multimeter.
  • Contact professional assistance if unsure or encountering significant issues.

Safety is paramount when dealing with electrical components. Prioritize safety by wearing protective gear and being cautious throughout the inspection process. 

Conclusion

Troubleshooting and fixing a Whirlpool refrigerator that is not turning on can be a manageable task if you follow these five tips. First and foremost, always check the power supply by ensuring the cord is properly plugged in and there are no issues with the electrical outlet.

Remember to consult Whirlpool fridge FAQs or seek professional assistance if needed. With proper maintenance and regular inspection of power supply issues, condenser coil cleaning, door closure check, along with thorough examination of electrical components like start relay troubleshooting and compressor examination using suitable tools – your Whirlpool refrigerator will continue to serve you well for years to come.

FAQs

What are common causes for a Whirlpool refrigerator not turning on?

Common problems for a Whirlpool refrigerator not turning on include issues with the power supply, controls, start relay, compressor, electronic control board, or thermostat malfunctions.

Can I troubleshoot and resolve issues with the power supply or controls on my own?

Yes, you can troubleshoot and resolve issues with the power supply or controls on your own. Check if the refrigerator is plugged in, the power outlet is functional, and inspect the controls for any visible issues. If uncertain, refer to the user manual or consult a professional.

Are there DIY solutions for problems related to the start relay or compressor not functioning properly?

There are some DIY solutions for problems related to the start relay or compressor, such as checking for visible damage, ensuring proper electrical connections, or testing the start relay. However, handling compressor-related issues may require professional expertise.

How do I handle issues with the electronic control board or thermostat causing startup problems?

To handle issues with the electronic control board or thermostat, check for visible damage, reset settings according to the user manual, and consider replacing the components if necessary. If you’re unsure or if issues persist, seek professional assistance.

When is it advisable to consult with a professional for Whirlpool refrigerator startup issues?

Consult with a professional for Whirlpool refrigerator startup issues when DIY solutions are unsuccessful, or if there are complex issues with components like the compressor, electronic control board, start relay, or thermostat. Professional technicians can provide accurate diagnosis and repairs.

Share This Article

Leave a Comment

Your email address will not be published. Required fields are marked *

FOLLOW US
BOOK SERVICE ONLINE
OTHER POSTS
Scroll to Top
Open chat
1
Scan the code
Get A Pro Chat *LIVE Agent*
Thank you for contacting Get A Pro! In a few words, let us know how we can help you. Please allow us 90 seconds to connect you to our live team member.