Get-A-Pro-Appliance-Repair-Logo-300x80

Whirlpool Stove and Oven Error Codes Troubleshooting

Whirlpool Stove and Oven Error Codes Troubleshooting
Table of Contents

Deepen your expertise in stove and oven repairs by exploring comprehensive resources like

Whirlpool Appliance Error Codes – Troubleshoot and Repair

Whirlpool Dishwasher Error Codes Troubleshooting

Whirlpool Washer Error Codes Troubleshoot and Repair

Quick Tips For Resetting an Error Code on Whirlpool Stove and Oven

Facing error codes on your Whirlpool stove or oven can be frustrating, but before calling for help, try these quick tips:

  • Reset the error code: Turn off power to the appliance by flipping the circuit breaker or unplugging it. Leave it disconnected for a few minutes to clear any glitches.
  • Restore power: After a few minutes, restore power and check if the error code has cleared by testing functions like preheating the oven or turning on a burner.
  • Understanding error codes: Different error codes indicate various issues, like an F3 code signaling problems with temperature sensing or heating elements for baking, or an F9 code indicating issues with the oven door lock mechanism.

F0 – Control Board Failure

Encountering an F0 error code on your Whirlpool stove or oven signals a control board failure. Here’s what you need to know:

Troubleshooting Steps

  • Reset the Control Board: Unplug the appliance for 5 minutes to clear temporary glitches.
  • Inspect for Damage: Check the control board for visible signs of damage or loose connections.
  • Contact Professional Help: If you’re not experienced with electrical repairs, it’s best to consult a professional technician for proper diagnosis and repair.

Preventive Measures

  • Protect from Power Surges: Use surge protectors or unplug during severe storms.
  • Avoid Overloading Circuits: Don’t run multiple high-power appliances simultaneously.
  • Regular Cleaning: Clean the appliance’s interior regularly to prevent electrical shorts.
  • Follow Usage Guidelines: Adhere to Whirlpool’s product manual for proper usage.
  • Schedule Maintenance Checks: Arrange periodic maintenance checks with a professional to catch issues early and prevent further damage.

F1 – Defective electronic oven control (EOC)

Encountering an F1 error code on your Whirlpool stove or oven signals a malfunction in the electronic oven control (EOC). Here’s what you need to know:

  • Faulty EOC: The EOC, responsible for regulating temperature and timing, may wear out over time, triggering error codes like F1 due to electronic component damage.
  • Replacement: If the EOC is defective, replacing it is typically necessary to resolve the issue.
  • Wiring Issues: Another possible cause of an F1 error is wiring problems between the EOC and other oven components. Inspect wiring harnesses for damage or loose connections.
  • Troubleshooting: Begin by resetting the control board by unplugging the appliance for a few minutes. If the error persists, consult the appliance manual for specific troubleshooting steps.
  • Professional Assistance: Contact for help from a Whirlpool stove and oven repair professional if uncomfortable with electrical troubleshooting. Prioritize safety by disconnecting power before any repairs or inspections.

F1-E0 – EEPROM Communication Error

The F1-E0 error code on a Whirlpool stove or oven indicates a communication problem with the EEPROM (Electrically Erasable Programmable Read-Only Memory) chip. Here’s what you need to know:

Causes

  • Loose or faulty connection between the control board and the EEPROM chip.
  • Damage to the control board interfering with communication.
  • Power surges or electrical fluctuations corrupting data stored in memory.

Troubleshooting Steps

  • Disconnect power for a few minutes and then reconnect to reset the system.
  • Inspect and tighten any loose connections between the control board and EEPROM chip.
  • Check wiring harnesses for damage and secure or replace them as needed.
  • Consider updating firmware on specific models via Whirlpool’s website.

If you’re unable to resolve the error after troubleshooting, it’s advisable to seek assistance from a professional repair technician familiar with Whirlpool products and error codes. They can diagnose and fix the issue safely and efficiently.

F1-E1 – EEPROM Checksum Error

The F1-E1 error code on a Whirlpool stove or oven signals an EEPROM Checksum Error. Here’s what you need to know:

  • Error Description: The F1-E1 error indicates a communication problem between the electronic oven control (EOC) and the EEPROM, which stores crucial data and settings.

Causes

  • Power surge or interruption leading to corrupted data in the EEPROM.
  • Faulty EOC or loose connection between the EOC and EEPROM.

Troubleshooting Steps

  • Turn off power to the appliance at the circuit breaker for 10 minutes to reset temporary glitches.
  • If the error persists after restoring power, seek professional repair assistance.

Remember, attempting to reset the error may not fix the underlying issue, and professional intervention is often required for resolution.

F1-E2 – UL A/D Error(s)

The F1-E2 error code on a Whirlpool stove or oven signals a UL A/D (Analog to Digital) error, typically indicating internal communication issues between the control board and sensors. Here’s how to address it:

  • Faulty Control Board: A common cause is a malfunctioning control board, disrupting signals from components like temperature sensors and keypads.
  • Resetting the Error: Temporarily resolve by unplugging the appliance for a few minutes, though persistent occurrences necessitate professional help.
  • Professional Assistance: Skilled technicians can diagnose and repair the issue comprehensively, including inspecting wiring and performing diagnostic tests.
  • Control Board Replacement: Sometimes, replacing the control board is necessary for effective resolution.
  • Maintenance Tips: Prevent errors by keeping the appliance clean, avoiding spills and grease buildup, and using buttons on the control panel gently.

By adhering to maintenance guidelines and using caution during operation, you can minimize encountering oven error codes like F1-E2, ensuring optimal performance from your Whirlpool stove or oven.

F1-E4 – Model ID Error

The F1-E4 error code on a Whirlpool stove or oven signals a Model ID Error, indicating a mismatch between the stored model identification number and the actual appliance model. Here’s how to address it:

Potential Causes

  • Faulty control board: Wear or damage to electronic components can disrupt communication.
  • Wiring harness issues: Loose connections or damaged wires can lead to incorrect model ID detection.

Troubleshooting Steps

  • Check electrical connections for security and damage.
  • Inspect the wiring harness for wear or loose connections.
  • If issues are found, repair or replace as necessary.
  • Reset the control board by turning off power for about 30 seconds before turning it back on.

F1-E5 – Calibration Shifted

Encountering the F1-E5 error code on your Whirlpool stove or oven indicates a shift in calibration, affecting temperature accuracy. Here’s what you need to know:

  • Cause: The error typically stems from a malfunctioning temperature sensor or issues with the wiring harness.
  • Sensor Malfunction: A faulty sensor or disconnection can lead to inaccurate temperature readings.
  • Wiring Issues: Loose connections or damaged wires in the harness can disrupt communication with the control board.

Troubleshooting Steps

  • Inspect the sensor and wiring harness for visible damage.
  • Replace damaged components as needed, following appliance manual guidelines or seeking professional repair assistance.

Safety Precautions

  • Always disconnect power before attempting any repairs.
  • Wear protective gear like gloves and eyewear for safety.

By addressing these issues promptly and safely, you can restore your Whirlpool stove or oven’s temperature accuracy and functionality.

F1-E6 – Latch Signal Mismatch Error

The F1-E6 error code on a Whirlpool stove or oven indicates a latch signal mismatch issue. Here’s what you need to know:

  • This error occurs when the control board doesn’t receive the correct signal from the door latch mechanism.
  • It can lead to malfunctioning of the oven, including the inability to use features like self-cleaning mode.
  • Possible causes include a faulty door latch assembly or loose/damaged wiring connections.
  • Troubleshoot by inspecting the latch assembly for damage or misalignment and checking wiring connections.
  • Try resetting the error code by turning off power for a few minutes at the circuit breaker.
  • If resetting doesn’t work, consider replacing the door latch assembly or its components, following manufacturer guidance.

Prioritize safety by disconnecting power before any repairs and consult official documentation or professional assistance if needed.

F1-E9 – Stack Overflow

The F1-E9 error code on Whirlpool stoves or ovens indicates a stack overflow problem, caused by the control board receiving more inputs than it can handle. Here’s how to troubleshoot and resolve it:

  • Reset: Turn off the power supply for a few minutes, then turn it back on to reset the system.
  • Inspect Keypad: Check for physical damage or stuck buttons on the keypad. Clean gently with a soft cloth dampened with water or mild detergent.
  • Replace Keypad: If cleaning doesn’t work, consider replacing the keypad.
  • Update Firmware: If the issue persists, update the stove or oven’s firmware by visiting Whirlpool’s official website for model-specific updates. Follow instructions carefully during installation.

Professional Assistance: If troubleshooting steps don’t work or if you’re unsure about repairs, seek help from a certified technician familiar with Whirlpool appliances. They can diagnose and fix complex issues like control board failures or underlying causes of the error code.

F1-E3 – Wiring Harness Size Not Matching Stored Value

When encountering the F1-E3 error code on your Whirlpool stove or oven, it typically indicates a mismatch between the actual wiring harness size and the programmed value. Here’s what to do:

  • Start by checking for loose or damaged wiring harness connections, which can occur due to vibrations or wear over time.
  • Inspect wires for signs of damage such as fraying, cuts, or pest interference, as rodents may chew through them.
  • If you find issues with the wiring, repair or replace the affected wires as necessary.
  • If connections seem intact, the problem may lie with a malfunctioning control board unable to recognize the correct harness size.

For complex electrical issues like this, it’s best to consult a professional technician to accurately diagnose and address the problem, as attempting repairs without proper training can pose safety risks.

F2/E0 – Keypad wire harness is disconnected

Encountering the F2/E0 error code on your Whirlpool stove or oven typically signals a disconnected keypad wire harness. To address this:

  • Turn off power to your oven at the circuit breaker for safety.
  • Open the control panel and locate the keypad wire harness.
  • Inspect the connections for looseness or damage.
  • Reconnect any loose wires securely or unplug and reconnect the wire harness if necessary.
  • Ensure proper alignment of pins before reinserting them.
  • Clean any dirt or debris from the connector ends.
  • Close the control panel and restore power.
  • Test different functions on the keypad to check if the error persists.

If the error continues, it may indicate more significant issues requiring professional repair. Consulting an experienced Whirlpool repair technician is recommended for complex electrical problems to avoid further damage or safety risks.

F2/E5 or F2/E6 – Cancel key is defective

Encountering the F2/E5 or F2/E6 error code on your Whirlpool stove or oven signals an issue with the cancel key, an essential component of the control panel. Here’s what to do:

  • Inspect the cancel key: Look for physical damage like cracks or chips that may affect its function. Dirt or debris buildup could also cause it to get stuck.
  • Clean the cancel key: Gently wipe it with a damp cloth to remove any accumulated dirt or debris. This often resolves the error.
  • Check keypad wire harness: Disconnect and reconnect the keypad wire harness to ensure secure connections between the keypad and control board.
  • Turn off power: Before handling any wiring, switch off the oven’s power supply to prevent accidents.
  • Secure connections: Reattach each wire securely in its respective slot, ensuring snug connections.

If these steps don’t fix the issue, consider professional repair services to diagnose and resolve the problem effectively. Technicians have the expertise to deal with Whirlpool oven circuitry and troubleshoot specific error codes like F2/E5 or F2/E6.

F3/E0 – Defective temperature sensor or open temperature sensor circuit

The F3/E0 error code on a Whirlpool stove indicates a faulty temperature sensor or an open temperature sensor circuit. Here’s what you need to know:

  • The temperature sensor measures the oven’s internal temperature, sending signals to the control board for temperature regulation.
  • Malfunctions in the sensor or its circuit can lead to inaccurate temperature readings and trigger the F3/E0 error.
  • Common causes include a defective sensor due to wear, damage, or disconnection from its circuit.
  • Check for visible damage such as frayed wires, loose connections, or corrosion affecting sensor functionality.
  • If issues are found, consult the stove’s manual or contact Whirlpool customer support for guidance on replacing faulty parts.
  • If no visible damage is present but the error persists after resetting the stove, it may indicate a complex electrical issue requiring professional repair assistance.

Addressing F3/E0 errors involves thorough inspection of the temperature sensor and associated wiring components. Prompt repairs or replacements can restore optimal stove performance.

F3/E1 – Defective temperature sensor or shorted temperature circuit

The F3/E1 error code on a Whirlpool stove or oven indicates a problem with the temperature sensor or circuit. Here’s what to do:

  • Promptly address the error to ensure safe and efficient appliance operation.
  • A faulty temperature sensor is a common cause of this error, affecting the oven’s heating and temperature maintenance.
  • Check the wiring connections between the temperature sensor and control board for damage or looseness.
  • Repair or replace any damaged components found during inspection.
  • If wiring seems fine, consider replacing the temperature sensor itself.
  • Consult your Whirlpool oven’s manual or customer support for specific replacement instructions.
  • Always disconnect power before attempting any repairs for safety.
  • Excessive dirt or grease buildup inside the oven can also cause sensor issues, so keep it clean.
  • If troubleshooting doesn’t work, seek professional help from qualified appliance repair technicians familiar with Whirlpool ovens.
  • Prioritize safety; if unsure, leave repairs to professionals.

F3/E2 – Temperature is over 575 degrees F in Bake mode.

Encountering the F3/E2 error code on your Whirlpool oven indicates a potentially dangerous temperature spike during Bake mode. Here’s how to address it:

  • Turn off the oven and let it cool completely before troubleshooting.
  • Check for a malfunctioning temperature sensor or shorted temperature circuit, common culprits of the error.
  • Replace the faulty sensor or repair damaged circuits to restore accurate temperature readings.

Another possible cause is control board failure:

  • The control board regulates oven functions and may malfunction, disrupting temperature communication.
  • Consider replacing or repairing the control board to resolve the error.

To prevent future errors and maintain oven performance:

  • Regularly inspect sensors and circuits for signs of malfunction.
  • Follow usage guidelines for self-cleaning functions and avoid extreme temperatures.

Seek professional help if troubleshooting becomes challenging or daunting, as experienced technicians can accurately diagnose and fix the issue.

F3/E3 – Temperature is over 950 degrees F in Clean mode

Encountering the F3/E3 error code on your Whirlpool stove or oven signifies a critical issue with overheating during Clean mode. Here’s how to troubleshoot:

  • Check for obstructions or debris blocking the oven’s vents or exhaust system, which can cause excessive heat buildup.
  • Clear any blockages to ensure proper airflow and prevent triggering the F3/E3 error code.
  • Inspect the temperature sensor and the temperature circuit for faults or shorts.

Replace the temperature sensor if it’s malfunctioning or sensing inaccurately, as it can lead to overheating and trigger the error code.

F4/E1 – Meat probe shorted

The F4/E1 error code on a Whirlpool stove or oven signals a meat probe shorted issue, which can disrupt cooking operations. Here’s how to address it:

  • Probe Damage or Moisture Exposure: Excessive moisture or physical damage to the meat probe can cause a short circuit, triggering the error. Handle the probe carefully and avoid exposing it to water or extreme temperatures.

Troubleshooting Steps

  1. Disconnect and Inspect: Unplug the meat probe and check for visible damage or corrosion. Clean the metal contacts on both the probe and socket with a soft cloth dampened in rubbing alcohol.
  2. Allow Drying: Ensure all components are thoroughly dry before reconnecting. If cleaning and drying don’t resolve the issue, consider replacing the meat probe.
  3. Replacement Parts: Consult your appliance manual for guidance on ordering a replacement meat probe tailored to your model. 

F5/E0 – Door is open, but latch is locked

Encountering the F5/E0 error code on your Whirlpool stove or oven can be frustrating when the door appears open but remains locked. Here’s how to troubleshoot:

Check Door Latch Mechanism

  • Ensure the latch is properly aligned and not stuck in a locked position.
  • Clean the latch area to remove any dirt or debris obstructing movement.
  • Use a silicone-based lubricant if needed for smooth operation.

Inspect Control Board

  • Electrical malfunctions in the control board can cause incorrect signals to the latch mechanism.
  • Try resetting the appliance by unplugging it for a few minutes, then plugging it back in.
  • If the error persists after multiple resets, seek professional assistance for diagnosis and repair.

Remember to thoroughly clean and inspect the door latch mechanism and perform a reset to rule out temporary electrical malfunctions. If the issue persists, consult a professional technician for further assistance.

F5/E1 – Self-clean latch won’t lock/unlock

Encountering the F5/E1 error code on your Whirlpool stove or oven signifies a malfunction with the self-clean latch. Here’s what you need to know:

  • Causes: The error may stem from a faulty door latch assembly or a malfunctioning control board.

Troubleshooting

  • Check for visible obstructions around the latch area and clean any debris or food particles.
  • Examine the latch assembly for wear or damage and replace it if necessary, following manufacturer guidelines.
  • If replacing the latch doesn’t fix the issue, there may be a control board failure requiring professional attention.

By inspecting, cleaning, and replacing worn components if needed, you can effectively troubleshoot the problem. However, if these steps don’t resolve the issue, seek assistance from a professional oven repair service for more complex underlying problems such as control board failure.

F6-E0 – Return Line Not Connected

The F6-E0 error code on a Whirlpool stove or oven signals a problem with the return line connection. Here’s what to do:

  • Check for loose or disconnected wiring, faulty connectors, or a malfunctioning control board.
  • Vibrations from regular use can loosen electrical connections, so inspect wiring and connectors for damage.
  • Ensure all wires are securely fastened and tighten any loose connections.
  • If the issue persists, it could be a faulty control board, which regulates oven functions like temperature and timing.
  • Professional repair might be needed to diagnose and replace the control board if it’s the source of the problem.

Promptly addressing the F6-E0 error prevents further complications and ensures your oven operates smoothly. If simple fixes don’t work, professional repair services can help diagnose and resolve the issue efficiently.

F7-E1 – Common Switch Wire Is Defective

The F7-E1 error code on a Whirlpool stove or oven indicates a problem with the common switch wire, which is responsible for transmitting signals between the control board and various components. Here’s how to troubleshoot:

  • Turn off power to the appliance for safety.
  • Inspect wiring connections for damage or disconnections.
  • Reconnect any loose wires securely.
  • If the issue persists, the common switch wire may need replacement.

Prioritize safety by wearing protective gloves and ensuring the appliance is completely disconnected from power. If problems persist, seek assistance from a professional repair technician with expertise in appliance wiring. They can accurately diagnose and resolve complex electrical issues.

F7 – Function Key Stuck

Encountering the F7 error code on your Whirlpool stove or oven indicates a stuck function key. Here’s what to do:

  • Clean around the buttons with a soft cloth and mild cleaning solution to remove any debris causing the key to stick.
  • Inspect the keypad for damage like worn-out buttons or loose connections.
  • If cleaning doesn’t work, consider replacing the keypad, preferably by contacting a professional Whirlpool oven repair service for safe and effective resolution.

Remember

  • Complex repairs should be left to professionals to avoid further damage.
  • Always refer to your appliance’s manual or seek expert advice for specific troubleshooting steps tailored to your model.

F8 – Control Board Failure

Control board failure is a common frustration with Whirlpool stoves and ovens, often signaled by the dreaded F8 error code. Causes include:

  • Power surges or fluctuations damaging delicate control board components.
  • Overheating from excessive use or blocked ventilation.
  • Exposure to water or moisture.

Troubleshooting steps for an F8 error

  • Reset the appliance by turning off the power at the circuit breaker, then back on.
  • Inspect wiring connections for security and damage, as loose or faulty connections can trigger errors.

If the issue persists, consult a professional repair technician. To prevent future failures:

  1. Use surge protectors to shield against power surges.
  2. Ensure adequate ventilation around the appliance.
  3. Avoid exposing it to excessive moisture.
  4. Adhere to manufacturer’s maintenance and cleaning guidelines.
  5. Consider updating firmware for potential bug fixes and stability improvements. These preventive measures can extend the lifespan and performance of your Whirlpool stove or oven.

F9 – Oven Door Lock Failure

The F9 error code in your Whirlpool oven signals a door lock failure, hindering its operation and possibly posing safety risks. Here’s how to troubleshoot:

Check for Mechanical Issues

  • Inspect the door lock for jams, misalignment, or wear.

Address Electrical Problems

  • Look for faulty wiring or a defective control board triggering the error.

Troubleshooting Steps

  • Remove any visible obstructions around the door lock.
  • Verify wiring connections for damage or disconnection.
  • Contact professional help for complex electronic issues.

Update Firmware to Fix Whirlpool Stove and Oven Error Codes (Applicable Models)

Updating firmware for Whirlpool ovens is essential for resolving error codes and improving performance. Here’s how:

  • Check eligibility for updates: Visit Whirlpool’s website or contact customer service.
  • Download firmware: Use a computer to download the latest firmware onto a USB drive.
  • Insert USB drive: Plug the USB drive into the appropriate port on your oven.
  • Initiate update: Navigate oven’s menu to the firmware update section and follow prompts.

Updating firmware

  • Resolves common error codes like F3, F6, F9, or F7.
  • Enhances functionality and overall performance of the oven.

Call a Professional Whirlpool Stove and Oven Repairman

When troubleshooting Whirlpool stove and oven error codes, seeking professional repair assistance is often the best option. Here’s why:

  • Persistent error codes like F8 indicate control board failure, which requires specialized expertise to diagnose and fix.
  • Attempting DIY fixes without proper skills and tools can lead to further damage or injury.
  • A professional technician can accurately identify the root cause of control board failure and provide appropriate solutions.
  • Professional repairmen have access to diagnostic tools to pinpoint the exact cause and ensure effective repairs.
  • They can also conduct comprehensive inspections of other components to prevent future errors.
  • Opting for professional repair services ensures accurate diagnosis and lasting solutions for optimal appliance performance.

At Get A Pro Appliance Repair we are dedicated to repairing ANY Whirlpool stove and oven repair job in the Greater Toronto Area and nearby regions such as Durham region, York Region, Simcoe County, Peel region and more!

For same-day Whirlpool stove or oven repair service, contact us at our toll-free number 1-800-498-4490 or fill out our contact form on our website and our team will get back to you during business hours!

Conclusion

Troubleshooting Whirlpool Stove and Oven error codes can be a daunting task, but armed with the knowledge of common error codes and their causes, you can tackle these issues with confidence. Throughout this article, we have discussed various error codes such as F0, F1, F2, F3, F4, F5, F6, F7, F8, and F9. Each code indicates a specific problem within the stove or oven system.

 Check Whirlpool’s website for any available firmware updates for your specific model. If all else fails and you find yourself unable to troubleshoot and resolve the error code issue on your own, it may be time to call a professional Whirlpool stove and oven repairman.

By following the steps outlined in this article and seeking professional assistance when necessary, you can overcome these challenges and have your Whirlpool stove and oven performing at its best once again. So don’t let the F0, F1, or any other error code get you down – with a little perseverance and know-how, your Whirlpool stove and oven will be back to baking perfection in no time.

FAQs

How do I interpret error codes displayed by my Whirlpool oven?

Interpret error codes on your Whirlpool oven by consulting the appliance’s user manual. The manual provides detailed information about the meaning of each code and offers guidance on potential issues. Use this resource to understand and address specific error messages.

Can I resolve error codes on my Whirlpool oven without professional assistance?

Many Whirlpool oven error codes can be resolved without professional assistance. Refer to the user manual for troubleshooting steps, which may include checking temperature settings, verifying door seals, or resetting the oven. Seek professional help if the issue persists.

Are there online resources to guide me through specific oven error messages?

Explore online resources such as Whirlpool’s official website, forums, and appliance repair websites to find guides and insights on specific oven error messages. These resources often provide step-by-step instructions for troubleshooting and resolving issues.

Should I replace a part indicated by an error code right away?

Before replacing a part indicated by an error code, conduct thorough troubleshooting to confirm the root cause. Some issues may be resolved by adjusting settings, cleaning components, or resetting the oven. Replace parts only after identifying and addressing the specific problem.

How can I prevent recurring error codes in my Whirlpool oven?

Prevent recurring error codes by following the manufacturer’s recommended maintenance practices, cleaning the oven regularly, and ensuring proper usage. Address issues promptly, and consider professional assistance if error codes persist despite troubleshooting efforts.

Share This Article

Leave a Comment

Your email address will not be published. Required fields are marked *

FOLLOW US
BOOK SERVICE ONLINE
OTHER POSTS
Scroll to Top
Open chat
1
Scan the code
Get A Pro Chat *LIVE Agent*
Thank you for contacting Get A Pro! In a few words, let us know how we can help you. Please allow us 90 seconds to connect you to our live team member.