7 Tips To Troubleshoot a Noisy Whirlpool Washing Machine

7 Tips To Troubleshoot a Noisy Whirlpool Washing Machine
Table of Contents

Deepen your proficiency in washer repair with helpful articles such as

15 Common Whirlpool Washer Problems and How to Fix Them

Top Load Whirlpool Washer Will Not Agitate? 7 Solutions!

6 Reasons Why a Whirlpool Washer Will Not Start

1. Check for Loose Items

A noisy washing machine disrupts home tranquility but can be addressed by identifying the source of the noise. Loose items are a common culprit in noisy Whirlpool washing machines.

  • Loose objects like coins or buttons inside the drum cause rattling or banging sounds.
  • Inspect the drum carefully for items like coins, buttons, or small clothing pieces.
  • Gently rotate the drum by hand to detect any obstructions causing friction or noise.

Promptly remove any foreign objects found to prevent further damage to the washing machine. Even small items can create significant noise and interfere with proper water drainage or damage machine parts.

To prevent washing machine noise, adopt good laundry practices. Always check and empty pockets before loading clothes to avoid accidental object transfer into the drum. A quick garment scan before loading ensures a peaceful laundry experience without unexpected noises.

2. Inspect the Drum Bearings

Inspecting the drum bearings is crucial for troubleshooting a noisy Whirlpool washing machine. Noisy bearings are often the culprit behind irritating washer sounds, usually due to wear or damage over time.

  • To diagnose, disconnect power and remove any objects from the drum that might mimic bearing noises.
  • Spin the drum manually to check for resistance or rough movements; grinding or unusual sounds indicate potential bearing issues.
  • Disassemble the washer as per the owner’s manual to access and visually inspect the bearings for damage like rust, cracks, or excessive wear.
  • Look for signs of grease leakage, which could also indicate a problem with the bearings.
  • If bearings are worn or damaged, replacement is necessary to resolve the noise problem.

Replacing bearings can be complex and may require specialized tools and expertise. Consulting a professional technician or Whirlpool customer support for guidance is recommended.

3. Examine the Drive Belt

  • The drive belt is crucial for the smooth operation of your Whirlpool washing machine.
  • Worn or damaged belts can cause excessive noise during the wash cycle.

Troubleshooting Steps

  1. Safety First: Unplug the machine and turn off the water supply before starting any inspection or repair work.
  2. Locate the Drive Belt: Typically situated at the bottom of the washer, it connects the motor to the drum.
  3. Inspect for Damage: Look for cracks, fraying, or stretching on the belt.
  4. Replacement: If damage is found, replace the belt with a new one. Refer to Whirlpool’s manual or website for instructions.
  5. Alignment Issues: If no damage is apparent but noise persists, there may be an alignment problem.
  6. Tension Adjustment: Use tools to tighten or loosen the tension pulley or adjustment bolt near the motor assembly.

Additional Considerations

  • Check other components like pulleys or idler wheels for wear or damage.
  • Regular examination and maintenance can reduce noise levels during operation.

4. Verify Leveling and Balance

Dealing with a noisy washing machine, especially a Whirlpool model, can disrupt your home’s tranquility. When encountering noise issues, start by checking the leveling and balance of your machine.

  • Ensure the washer sits on a sturdy, even surface and use a level tool for balance.
  • Adjust feet or use shims to stabilize it if needed.
  • Distribute clothes evenly in the drum to prevent unbalanced loads and excessive vibrations.

If noise persists despite proper leveling and load balance, inspect the suspension system or shock absorbers for wear. Look for leaks or cracks and replace damaged components with essential tools recommended by Whirlpool.

Verifying leveling and balance is a crucial step in DIY washer repair, offering immediate relief from noise and extending the appliance’s lifespan by reducing strain on internal mechanisms.

5. Investigate the Motor Coupling

Investigating the motor coupling is crucial when troubleshooting a noisy Whirlpool washing machine. The motor coupling connects the motor to the transmission and can wear out over time, leading to excessive noise during operation. Here are steps to diagnose and resolve the issue:

  • Safety First: Disconnect the washing machine from the power source before starting any repairs to ensure safety.
  • Access the Motor Coupling: Remove the back panel of the washing machine to access the motor coupling.
  • Visual Inspection: Check the motor coupling for signs of damage or wear, such as cracks or breaks in the rubber portion. Ensure proper alignment with both the motor and transmission shafts.
  • Manual Rotation Test: Manually rotate both the motor and transmission pulleys while observing for excessive play or wobbling, which could indicate a problem with the motor coupling.
  • Replacement: If the motor coupling is worn out or damaged, it needs replacement. Essential tools like pliers and a socket wrench set are required. Refer to Whirlpool washer repair manuals or online resources for specific instructions on removal and replacement.

Addressing motor coupling issues can help silence noisy operations in your Whirlpool washing machine. By following these steps and seeking professional assistance if needed, you can resolve drive belt noise problems and ensure smooth functioning of your washer once again.

6. Assess Shock Absorbers

Assessing shock absorbers is crucial when troubleshooting a noisy Whirlpool washing machine. These components help minimize vibration and noise during the wash cycle, but over time, they can develop issues, leading to increased noise levels and potential damage to other parts.

  • Start by unplugging the washer and locating the shock absorbers near the outer tub assembly.
  • Inspect each shock absorber for wear, such as cracks or leaks, and promptly replace any damaged ones with compatible replacements.
  • Check mounting pins or bolts for looseness or wear, tightening or replacing them as needed to address excessive noise.

Soundproofing the washing machine area can further reduce noise, while proper loading techniques can prevent unbalanced loads, another common cause of excessive movement during spinning cycles.

7. Check for Foreign Objects

  • A common cause of a noisy washing machine is the presence of foreign objects inside the drum.
  • Items like coins, buttons, or loose screws can find their way into the drum during wash cycles, creating loud rattling or banging noises.
  • Before assuming a more serious issue, thoroughly check for foreign objects by:
  1. Turning off and unplugging the washing machine.
  2. Carefully opening the door or lid and visually inspecting the drum for visible items.
  3. Using a flashlight if needed and running your hand along the drum edges to feel for obstructions.
  4. Removing any foreign objects using appropriate tools like pliers or tongs to avoid injury.
  • Exercise caution when handling sharp or harmful objects that may have been left in pockets or accidentally dropped into the machine.
  • Once objects are removed, close and secure the door or lid before plugging in and restarting the machine.
  • Run a short test cycle to ensure the noise is eliminated and the washer runs smoothly without disruptive sounds.

Checking for foreign objects within the Whirlpool washing machine’s drum can effectively troubleshoot excessive noise. By inspecting and removing debris or misplaced items, you can potentially silence annoying sounds without extensive repairs or professional assistance.


Troubleshooting a noisy Whirlpool washing machine can be a daunting task, but armed with the right knowledge and tools, it is certainly achievable. By following the tips outlined in this article, you can effectively address the most common culprits behind a noisy washer. First and foremost, make sure to check for any loose items inside the machine.

Incorporating these troubleshooting techniques into your regular Whirlpool washer care routine will help silence your noisy washing machine effectively while promoting its longevity. However, if problems persist despite your best efforts at DIY washer repair or maintenance measures have been exhausted without success – do not hesitate to consult a professional technician for further assistance.

Remember, a well-functioning washing machine should not disrupt the tranquility of your home. With these tips and tricks, you can restore peace and quiet while ensuring your Whirlpool washer remains in optimal condition for years to come.


What are common reasons for a Whirlpool washing machine producing excessive noise?

Common reasons for a Whirlpool washing machine producing excessive noise include issues with unbalanced loads, worn-out parts, or problems with components like drum bearings or suspension springs.

Can I troubleshoot and resolve issues with noisy operations on my own?

Yes, you can troubleshoot and resolve issues with noisy operations in your Whirlpool washing machine. Check for unbalanced loads, inspect worn-out parts, and refer to the user manual for guidance on addressing common noise-related problems.

Are there DIY solutions for problems related to unbalanced loads or worn-out parts causing noise?

DIY solutions for problems related to unbalanced loads or worn-out parts causing noise include redistributing the load, checking for loose or damaged components, and tightening any loose parts. The user manual provides specific instructions for your washer model.

How do I address issues with the drum bearings or suspension springs causing excessive noise?

Address issues with drum bearings or suspension springs causing excessive noise by inspecting for visible damage, checking for proper tension, and replacing worn-out parts as needed. The user manual guides you through specific steps based on your washer model.

When is it advisable to consult with a professional for Whirlpool washer noise issues?

Consult with a professional for Whirlpool washer noise issues when DIY solutions prove ineffective, or if there are complex mechanical problems involving components like drum bearings or suspension springs. Professional technicians can provide accurate diagnosis and appropriate solutions.

Share This Article

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top
Open chat
Scan the code
Get A Pro Chat *LIVE Agent*
Thank you for contacting Get A Pro! In a few words, let us know how we can help you. Please allow us 90 seconds to connect you to our live team member.