How To Fix a Whirlpool Washer That is Not Draining – 7 Solutions

How To Fix a Whirlpool Washer That is Not Draining - 7 Solutions
Table of Contents

Expand your proficiency in washing machine repairs with insightful articles such as

15 Common Whirlpool Washer Problems and How to Fix Them

Whirlpool Washer Not Spinning? 7 Common Causes & Solutions

What To Do If Your Whirlpool Washer Will Not Drain or Spin!

1. Check for Clogs in the Drain Hose

When dealing with a Whirlpool washer that won’t drain, start by checking for clogs in the drain hose, a common cause of poor drainage.

  • Locate the drain hose at the back of the washer and detach it from both the machine and the wall.
  • Inspect the hose for obstructions like lint, debris, or foreign objects.
  • Use a long, flexible brush or plumber’s snake to gently dislodge any blockages, being careful not to damage the hose.
  • Alternatively, flush water through the hose to clear stubborn clogs, ensuring to place a bucket or towel underneath to catch any spills.
  • Lid switch issues can also affect drainage. Open and close the lid several times, listening for a clicking sound indicating proper function.
  • If there’s no click or it sounds irregular, further inspection or replacement of the lid switch may be necessary.

Properly diagnosing and addressing potential clogs in the drain hose is crucial for resolving drainage problems effectively. By following these steps and thoroughly examining all related aspects, such as checking for lint buildup, you can increase the likelihood of troubleshooting successfully before seeking professional help.

2. Inspect the Drain Pump for Blockages

Inspecting the drain pump is crucial for troubleshooting a Whirlpool washer with drainage issues. Blockages in the drain pump can hinder water flow, leading to poor drainage or complete failure.

Tools Needed

  • Screwdriver
  • Pliers
  • Small bucket or towel to catch spilled water

Locate the Drain Pump

  • Typically found at the bottom of the washer, accessible from the front or back depending on the model.
  • Ensure the washer is unplugged and disconnected from power before starting any work.

Visual Inspection and Debris Removal

  • Check the drain pump for visible debris such as lint, coins, buttons, or jewelry.
  • Use pliers or fingers to carefully remove any obstructions.

Check Impeller Blades

  • Inspect impeller blades for damage or obstruction, as they’re responsible for pumping water during drainage cycles.
  • Rotate the impeller gently by hand to ensure smooth movement.

Thoroughly inspecting and clearing blockages from the drain pump system can significantly enhance its performance and resolve drainage issues in your Whirlpool washer.

3. Examine the Lid Switch or Door Lock

When dealing with a Whirlpool washer that won’t drain, examining the lid switch or door lock is crucial as they ensure proper operation and safety during the wash cycle.

Check Engagement

  • Ensure the lid switch or door lock properly engages when closing the washer’s lid or door.
  • Misalignment or wear and tear may cause improper contact.
  • Gently press on the lid or door while listening for a distinct clicking sound indicating engagement.

Troubleshoot Electrical Connections

  • If the engagement seems fine but the washer still doesn’t drain, inspect electrical connections related to these mechanisms.
  • Check wires and connectors for damage like frayed wires or loose connections.
  • Repair any issues found using appropriate tools and techniques.

Refer to Error Codes

  • Some Whirlpool washers display error codes on the control panel related to lid switch or door lock problems.
  • Consult the washing machine’s manual for specific details on error codes and how to address them effectively.
  • Understanding these codes helps diagnose and resolve common drainage issues associated with faulty lid switches or door locks.

4. Verify the Drain Pump Belt (Applicable Models)

When troubleshooting drainage issues with your Whirlpool washer, it’s important to verify if it’s equipped with a drain pump belt. Here’s how:

  • Unplug the washer and turn off the water supply for safety.
  • Locate and access the back panel of your washer to inspect the drain pump belt.
  • Check for signs of wear such as fraying or stretching.
  • Test the belt’s tension by gently tugging on it; if it feels loose, it needs replacement.
  • Spin the pulley attached to the belt to ensure smooth movement without obstructions or noises.

Additionally, ensure proper maintenance by:

  • Regularly cleaning debris from the drain hose to prevent clogs.
  • Avoiding overloading the machine to prevent strain on belts and motors.

5. Test the Drain Pump Motor

When dealing with drainage issues in your Whirlpool washer, testing the drain pump motor is crucial. Here’s how:

  • Disconnect the power supply to the washer for safety.
  • Access the back panel to locate the drain pump and clear any debris.
  • Have tools ready, such as a multimeter and wrench, for testing.
  • Carefully disconnect wires from the drain pump motor and inspect for damage or loose connections.
  • Use a multimeter set on resistance mode to test continuity across the motor’s terminals.
  • Zero or near-zero readings indicate proper function, while no continuity suggests a faulty motor.
  • Double-check all connections and wires before concluding.

By following these steps and prioritizing safety, you can effectively troubleshoot the drain pump motor in your Whirlpool washer.

6. Check For Error Codes

When troubleshooting drainage issues with your Whirlpool washer, checking for error codes can be a quick and efficient way to diagnose the problem:

  • Consult the user manual or search online for error code interpretations specific to your model.
  • Error codes like “F02” (indicating drain hose clogs or pump blockages) and “F21” (suggesting long drain times due to obstructions or pump failure) are common for drainage problems.
  • Once you’ve identified an error code, understand its meaning and follow appropriate steps to address it.

For example

  • For an “F02” code, inspect the drain hose for obstructions or kinks, clean out debris, and ensure proper connection.
  • Check the drain pump for blockages using tools like a flashlight.

By using error codes as a guide and following recommended troubleshooting steps, you can efficiently resolve drainage issues with your Whirlpool washer.

7. Inspect the Pressure Switch

To ensure proper drainage in your Whirlpool washer, it’s crucial to inspect the pressure switch. Here’s how:

  • Disconnect the power supply and access the washer’s control panel to locate the pressure switch.
  • Carefully remove its wiring harness and check for damage or corrosion on the connections.
  • Clean any debris or lint from the connectors using a soft brush or compressed air.
  • Examine the pressure switch for visible damage or wear, such as cracks or breaks in the housing.
  • Test the pressure switch using a multimeter set on continuity mode:
  1. Connect one probe to each terminal on the pressure switch.
  2. Apply gentle pressure to each corresponding water level setting (e.g., small load, medium load) and check for continuity.
  • A properly functioning pressure switch should show continuity at each level when pressed.
  • Inspecting and testing the pressure switch is crucial for diagnosing drainage issues in your washer.

By ensuring secure connections and examining for damage or wear, you can effectively troubleshoot drainage problems. Always prioritize safety and refer to your washer’s manual or seek professional assistance if needed.


After exploring the various solutions to fix a Whirlpool washer that is not draining, it is evident that a combination of troubleshooting techniques and maintenance practices can effectively resolve this common issue. 

Armed with these effective washing tips and maintenance practices outlined here for fixing a Whirlpool washer that is not draining properly should alleviate any frustration caused by this issue. 

Remember to practice preventive measures like regular cleaning routines to keep your washer operating optimally, ensuring smooth and efficient laundry cycles. With these solutions at your disposal, you can restore your washer’s functionality and continue enjoying hassle-free laundry days.


What are common causes of a Whirlpool washer not draining properly?

Typical causes of a Whirlpool washer not draining properly include clogged drains, pump malfunctions, or issues with the drain hose. Identifying the specific cause is crucial for effective troubleshooting.

Can I troubleshoot and resolve drainage issues in my washer without professional assistance?

Yes, you can troubleshoot and resolve drainage issues in your Whirlpool washer without professional assistance. Refer to the user manual for DIY solutions, which may involve checking for clogs, inspecting the drain pump, or ensuring proper installation of the drain hose.

Are there DIY solutions for problems like clogged drains or pump malfunctions?

DIY solutions for problems like clogged drains or pump malfunctions include checking for debris in the drain pump, clearing clogs in the drain hose, and inspecting the pump for proper functioning. The user manual provides step-by-step guidance.

How do I address issues with the washer not completing the drain cycle?

Address issues with the washer not completing the drain cycle by checking for blockages in the drain hose, verifying the drain pump’s operation, and ensuring proper installation of the hose. Restart the cycle after addressing any identified issues.

When should I involve a professional in fixing Whirlpool washer drainage problems?

Involve a professional in fixing Whirlpool washer drainage problems when DIY solutions don’t resolve the issue, or if there are complex mechanical or electrical issues with components like the drain pump. Professional technicians have the expertise to diagnose and repair more challenging problems.

Share This Article

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top
Open chat
Scan the code
Get A Pro Chat *LIVE Agent*
Thank you for contacting Get A Pro! In a few words, let us know how we can help you. Please allow us 90 seconds to connect you to our live team member.