Whirlpool Washer Not Spinning? 7 Common Causes & Solutions

Whirlpool Washer Not Spinning? 7 Common Causes & Solutions
Table of Contents

Refine your washer repair skills with articles like

15 Common Whirlpool Washer Problems and How to Fix Them

How To Fix a Whirlpool Washer That is Not Draining – 7 Solutions

6 Reasons Why a Whirlpool Washing Machine is Leaking Water

1. Overloading Error Code (uL or UL)

When dealing with a Whirlpool washer that won’t spin, several common issues could be at play:

  • Overloading Error Code (uL or UL): Overloading the washer with too many items can strain the motor and drive belt, triggering error codes like “uL” or “UL” to prevent further damage.
  • Drive Belt Problems: The drive belt transfers power from the motor to the drum. If it wears out or breaks, the washer may fail to spin properly during the cycle.
  • Faulty Lid Switch: The lid switch ensures safety by halting spinning when the lid is open. Malfunctioning switches can falsely indicate an open lid, causing the washer to stop spinning.

To address these issues

  • Avoid overloading the washer and follow recommended load capacity guidelines.
  • Perform regular maintenance, including cleaning filters and drain hoses to prevent obstructions.
  • Consult your washer’s troubleshooting guide for model-specific solutions.

Understanding these common issues and implementing DIY repairs alongside proper maintenance practices can restore your Whirlpool washer’s spinning functionality and prevent future problems.

2. Drive Belt Broken or Worn

If your Whirlpool washer is not spinning, a potential culprit could be a worn or broken drive belt. Here’s what to do:

  • Unplug the washer and access the back panel to inspect the drive belt.
  • Look for visible damage such as cracks or tears.
  • Consider checking the motor control board as it may also affect the drive belt’s functionality.
  • If the belt is damaged, it needs replacement. Order a new one from an authorized Whirlpool parts supplier.
  • Refer to your washer’s manual or a repair guide for proper replacement instructions.
  • Prevent future issues by regularly cleaning debris around pulleys and motor and avoiding overloading the machine.

3. Lid Switch Broken or Worn

A malfunctioning lid switch can cause your Whirlpool washer to stop spinning. Here’s what you need to know:

  • The lid switch ensures the washer spins only when the lid is closed securely.
  • To test if the lid switch is faulty, try bypassing it with a troubleshooting tool designed for Whirlpool washers.
  • Common reasons for lid switch issues include wear and tear from extensive use or physical damage to the lid.
  • Understanding error codes like uL can help diagnose problems with components such as the lid switch.
  • Replace the broken or worn-out lid switch with a compatible part for your Whirlpool model, following instructions from the user manual or online resources.
  • Regular maintenance helps prevent issues like a non-spinning washer caused by a faulty lid switch. Inspect components during routine checks for signs of wear.

Early detection and prompt action can prevent inconvenient breakdowns and expensive repairs. Don’t overlook the lid switch when troubleshooting spinning problems with your Whirlpool washer.

4. Motor Coupling Worn

The motor coupling is crucial for a washer’s spin cycle. Here’s how to troubleshoot it:

  • Listen for the motor running but no tub spin, a common sign of a worn coupling.
  • Look for excessive vibration during agitation or grinding noises during spinning.
  • To check, unplug the washer, remove the cabinet or back panel, and inspect the motor and transmission assembly for wear or damage.
  • Replace the coupling if cracked, broken, or missing pieces are found.
  • Disconnect wires and remove fasteners to replace the coupling, following the manual’s instructions for your Whirlpool washer model.

5. Broken Door Lock

A malfunctioning door lock in your Whirlpool washer can halt the spin cycle and cause frustration. Here’s what you need to know:

  • Symptoms: Error codes on the control panel or lack of spinning action.
  • Causes: Wear and tear over time from frequent opening and closing of the door, or excessive force applied to the locked door.
  • Solution: Replace the faulty door lock component, typically found behind the front panel of the washer. Consult the user manual or seek professional help for guidance.
  • Prevention: Handle the door with care, avoiding slamming or forcing it shut. Regularly inspect for wear or damage and address any issues promptly.

6. Worn Clutch Assembly

When your Whirlpool washer isn’t spinning, a worn clutch assembly could be to blame. Here’s what you need to know:

  • Identifying Signs: Listen for a loud grinding noise during the spin cycle or notice excessive vibration/shaking.
  • Inspecting the Clutch: Unplug the washer and access the clutch assembly by removing necessary parts or panels.
  • Assessing Damage: Check the condition of the clutch pads; if worn or damaged, they likely need replacing.
  • Replacing the Clutch: Obtain a new clutch assembly from authorized dealers or online retailers and follow installation instructions carefully.
  • Consider Professional Help: If unsure or inexperienced, seek assistance from a Whirlpool appliance repair technician.

Maintain your washer by regularly inspecting and cleaning components like drive belts and lid switches to prevent issues. Following a maintenance schedule can prolong your washer’s lifespan and ensure smooth operation.

7. Defective Motor Control Board

A defective motor control board can be a significant reason for your Whirlpool washer’s spinning malfunction. Here’s what to look for:

Symptoms: Washer fails to start or complete the spin cycle; may stop midway. Error codes related to motor control issues may appear on the display panel.


  • Unplug the machine and check connections leading to the motor control board for any loose or damaged wires.
  • Test other functions like agitating or draining to see if they’re affected, which could indicate a problem with the board.


  • Before replacing, consult the user manual for Whirlpool’s customer support for tailored troubleshooting steps.
  • Proper diagnosis and addressing of issues related to the motor control board are essential for resolving spinning problems in your washer.


When faced with a Whirlpool washer not spinning, there are several common causes and solutions to consider. Understanding these common issues can help you troubleshoot and fix your washing machine efficiently.

While it may seem daunting at first to fix a washing machine that won’t spin, many of these issues have straightforward solutions that can be tackled through DIY repair methods. However, it is always advised to prioritize safety and consult professional assistance if needed.

By understanding common causes of washing machine issues such as overloading errors or worn-out components like drive belts or clutch assemblies in Whirlpool washers while also following proper maintenance practices and utilizing necessary troubleshooting tools for repair purposes when necessary; one can effectively address problems related to a Whirlpool washer not spinning. 


What are common reasons for a Whirlpool washer not spinning properly?

Common reasons for a Whirlpool washer not spinning properly include issues with the lid switch, drive belt, motor coupling, or problems with the control board. Identifying the specific cause is essential for effective troubleshooting.

Can I troubleshoot issues with the washer’s spin cycle on my own?

Yes, you can troubleshoot issues with the washer’s spin cycle on your own by referring to the user manual’s troubleshooting guide. Common DIY solutions may involve checking the lid switch, inspecting the drive belt, or examining the motor coupling.

Are there DIY solutions for problems related to the washer not reaching high spin speeds?

DIY solutions for issues related to the washer not reaching high spin speeds may include checking for overloading, redistributing the load for better balance, and ensuring the washer is on a level surface. The user manual provides guidance on these troubleshooting steps.

How do I handle issues with unbalanced loads causing spin problems?

Handle issues with unbalanced loads causing spin problems by redistributing the clothes evenly inside the drum. Overloading can lead to imbalance during the spin cycle. Adjust the load and restart the cycle for better performance.

When is it advisable to consult with a professional for Whirlpool washer spin issues?

Consult with a professional for Whirlpool washer spin issues when DIY troubleshooting doesn’t resolve the problem, or if there are underlying mechanical or electronic issues with components like the motor or control board. Professional technicians can diagnose and repair complex issues effectively.

Share This Article

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top
Open chat
Scan the code
Get A Pro Chat *LIVE Agent*
Thank you for contacting Get A Pro! In a few words, let us know how we can help you. Please allow us 90 seconds to connect you to our live team member.