Get-A-Pro-Appliance-Repair-Logo-300x80

6 Reasons Why a Whirlpool Washer Will Not Start

6 Reasons Why a Whirlpool Washer Will Not Start
Table of Contents

Enhance your know-how in washing machine repairs with insightful resources like

15 Common Whirlpool Washer Problems and How to Fix Them

7 Tips To Troubleshoot a Noisy Whirlpool Washing Machine

6 Reasons Why a Whirlpool Washing Machine is Leaking Water

1. Power Supply Issues

Power supply issues often cause a Whirlpool washer to malfunction, refusing to start. It’s vital to confirm the machine receives adequate power before troubleshooting further.

  • Start by ensuring the washer is properly plugged into a functioning electrical outlet.
  • Check for accidental tugs or loose connections that may dislodge the power cord.
  • Firmly insert the plug back into the outlet and ensure it’s securely attached.

If the washer still doesn’t start:

  • Investigate the circuit breaker or fuse box for any tripped breakers or blown fuses.
  • Reset tripped breakers or replace blown fuses as needed.

Consider:

  • Testing the outlet’s functionality using a multimeter or plugging in another appliance.
  • Inspecting the power cord for visible damage, such as frayed wires or burnt connectors.

Addressing power supply issues is crucial when troubleshooting startup problems with your Whirlpool washer. Verify a secure connection to an active outlet, check for tripped breakers or blown fuses, and inspect the power cord for damage before proceeding with further troubleshooting steps.

2. Door or Lid Switch Problems

One common issue that can prevent a Whirlpool washer from starting is a malfunctioning door or lid switch, a safety feature ensuring the washer won’t start with the door or lid open.

Potential Problems

  • The switch may be broken or damaged due to continuous use and wear.
  • Misalignment of the switch can occur, hindering proper contact when the door or lid is closed.
  • Accumulated debris or dirt around the switch may interfere with its functionality.

To troubleshoot, inspect the switch for visible damage such as cracks, loose wires, or connections. If found, consider replacing the switch and ensuring proper alignment with the washer’s frame mechanism.

If no visible issues are present, try cleaning the switch to remove debris using a clean cloth and mild detergent. Remember to unplug the washer before any repair attempts.

3. Faulty Start Button

The start button on a Whirlpool washer is crucial for initiating the washing cycle. If it malfunctions, the washer may fail to start altogether. Fortunately, there are solutions to address this issue and restore functionality.

Cleaning the Start Button Area

  • Debris or dirt buildup around the start button can cause it to become stuck or unresponsive.
  • Disconnect the power supply to the washer and gently clean around the start button area using a soft cloth dampened with mild detergent or vinegar-water solution.
  • Ensure the area is free from grime or residue before allowing it to dry completely and reconnecting the power supply.

Checking for Loose Connections

  • Vibrations from regular use can loosen connections between the control panel and internal wiring.
  • Carefully remove the control panel following manufacturer instructions or seeking professional assistance.
  • Inspect for loose wires or connectors and tighten them securely if found.
  • Look for signs of damage such as frayed wires or burnt connectors that may require replacement.

Replacing the Start Button

  • If cleaning or tightening connections doesn’t resolve the issue, the start button itself may need replacement.
  • Refer to your appliance’s user manual for specific guidance on replacing components.
  • Alternatively, contact assistance from a professional technician specialized in appliance repair to ensure efficient and effective replacement without damaging other components.

By promptly addressing faulty start buttons and applying these solutions accordingly, you can rectify common problems preventing your Whirlpool washer from starting properly. Key takeaways for fixing washing machine startup problems include cleaning the start button area, tightening loose connections, and replacing the faulty start button if necessary. These steps should help restore your washer’s functionality.

4. Timer or Control Board Malfunction

When ensuring your Whirlpool washer functions properly, the timer and control board are vital components. If either malfunctions, your washer may fail to start. Let’s address common issues related to these parts and potential solutions.

Failure to Start

  • Pressing the start button with no response is a common symptom of timer or control board issues.
  • Check for other causes like power supply problems or faulty door switches before assuming timer or control board malfunction.

Diagnostic Tests

  • Run diagnostic tests accessible in many Whirlpool washers to troubleshoot issues.
  • Follow user manual instructions to interpret error codes detected by the onboard computer.

Physical Inspection

  • Examine for loose connections or damaged wiring before considering replacement.
  • Ensure all components are intact and properly connected.

Running diagnostics and checking connections can guide whether replacement parts are needed. Remember, professional assistance is available for dealing with intricate components like timers and control boards.

5. Overloaded or Uneven Load

When a Whirlpool washer refuses to start, a common culprit is an overloaded or uneven load, which strains the motor and triggers safety mechanisms.

  • Washing machines have specific load capacities, exceeding which can strain internal components.
  • Unevenly distributed loads can cause imbalance during the spin cycle, activating safety features that prevent startup.

To troubleshoot:

  • Check the user manual for the washer’s maximum load capacity.
  • Avoid overloading to prevent performance issues and long-term damage.
  • Distribute laundry evenly inside the drum to prevent imbalance during spinning.

If an uneven load is suspected:

  • Redistribute laundry evenly within the drum, moving items strategically across both sides.
  • Restart the washer after balancing the load.

Overloaded or uneven loads strain the motor and trigger safety mechanisms, preventing startup. Adhering to load capacities and ensuring even distribution minimize these issues, promoting smooth washer operation.

6. Motor or Drive Belt Issues

When your Whirlpool washer refuses to start, motor or drive belt issues could be the cause. The motor powers the machine’s components, and a malfunctioning one can hinder startup. Similarly, the drive belt transmits motion from the motor to the tub for agitation and spinning.

  • A burnt-out motor winding may emit a distinct burning smell, indicating excessive load or wear.
  • Drive belt issues manifest through symptoms like screeching noises, vibrations, or a non-rotating drum.
  • Inspect the drive belt for fraying or cracking and replace if damaged to restore functionality.

Regular maintenance is essential to prevent startup problems. Watch for signs of wear like loose connections or worn belts and address promptly. Troubleshoot issues, and implement preventive measures to ensure smooth operation of your Whirlpool washer and minimize disruptions.

Conclusion

Dealing with a Whirlpool washer that refuses to start can be frustrating, but by understanding the common reasons behind this issue and employing appropriate troubleshooting techniques, you can often resolve the problem without the need for professional assistance. When faced with a washer that won’t start, it is crucial to check the power supply first. Ensure that the washer is properly plugged in and that there are no issues with the electrical outlet.

Remember that preventative measures can also go a long way in avoiding startup issues with your Whirlpool washer: familiarize yourself with troubleshooting techniques specific to your model; perform regular maintenance checks on electrical connections and switches; adhere to load capacity recommendations; and keep an eye out for signs of wear and tear on important components such as belts and control boards.

 By taking these proactive steps, you can minimize the chances of encountering startup problems with your Whirlpool washer and ensure its smooth functioning for years to come.

FAQs

What are common reasons for a Whirlpool washer not starting?

Typical reasons for a Whirlpool washer not starting may include issues with the power supply, controls, door latch, lid switch, or electronic control board

Can I troubleshoot and resolve issues with the power supply or controls on my own?

Yes, you can troubleshoot and resolve issues with the power supply or controls on your own. Check for power connectivity, inspect the control settings, and refer to the user manual for guidance on addressing common startup problems.

Are there DIY solutions for problems related to the door latch or lid switch preventing start-up?

Yes, DIY solutions for problems related to the door latch or lid switch preventing start-up include checking for proper alignment, cleaning any debris, or replacing the faulty components. The user manual provides specific instructions for your washer model.

How do I handle issues with the electronic control board or timer causing startup problems?

Address issues with the electronic control board or timer causing startup problems by checking for visible damage, ensuring proper connections, and replacing the components if necessary. The user manual guides you through specific steps based on your washer model.

When is it advisable to consult with a professional for Whirlpool washer startup issues?

Consult with a professional for Whirlpool washer startup issues when DIY solutions are unsuccessful, or if there are complex electrical or electronic problems involving components like the electronic control board or timer. Professional technicians can provide accurate diagnosis and appropriate solutions

Share This Article

Leave a Comment

Your email address will not be published. Required fields are marked *

FOLLOW US
BOOK SERVICE ONLINE
OTHER POSTS
Scroll to Top
Open chat
1
Scan the code
Get A Pro Chat *LIVE Agent*
Thank you for contacting Get A Pro! In a few words, let us know how we can help you. Please allow us 90 seconds to connect you to our live team member.