Whirlpool Washing Machine Will Not Turn ON – 8 Expert Solutions

Whirlpool Washing Machine Will Not Turn ON - 8 Expert Solutions
Table of Contents

Augment your proficiency in washer repair by exploring insightful articles such as

15 Common Whirlpool Washer Problems and How to Fix Them

Whirlpool Washing Machine Will Not Lock the Lid or Door – 6 Solutions

Troubleshooting a Whirlpool Washer That Will Not Shut OFF

1. Check Power Supply

To troubleshoot a Whirlpool washing machine that won’t turn on, start by checking the power supply. Ensure the appliance is plugged into a functioning electrical outlet and inspect the power cord for damage.

  • Verify the machine is properly plugged in and the plug isn’t loose or dislodged.
  • Examine the power cord for frayed wires or exposed insulation; replace if damaged to prevent safety hazards.
  • Check other appliances on the same circuit to confirm there are no interruptions in the electrical supply.

If there are issues with the home’s electrical system, seek assistance from a licensed electrician to resolve them. Addressing power supply problems upfront can eliminate simple issues preventing the washer from turning on, saving time and effort in troubleshooting.

2. Examine Door Latch

When dealing with a Whirlpool washing machine that won’t start, one of the primary areas to check is the door latch. A malfunctioning latch can prevent the washer from responding to controls and starting up.

  • Start by examining the physical condition of the latch, looking for signs of damage or wear.
  • Ensure the latch is securely fastened and aligned with the slot on the door frame.
  • Check for debris or obstructions that could hinder the latch’s function, cleaning both sides with a soft brush or cloth.

If there are no visible issues, investigate further by checking for control panel errors related to the door latch. Some models may display error codes indicating a problem with this component.

3. Assess Control Panel

When your Whirlpool washing machine fails to turn on, the control panel is a critical component to check first. It houses buttons and settings crucial for customizing your washing experience.

  • Begin troubleshooting by inspecting the control panel’s physical condition for damage or wear and tear.
  • Clean the control panel gently with a soft cloth and mild detergent solution to remove dirt or residue that may affect button responsiveness.
  • Reset the control panel by unplugging the washing machine for a few minutes before plugging it back in to rectify minor glitches.

If cleaning and resetting don’t resolve the issue, check for faulty connections between the control panel and internal components like the main control board or wiring harnesses.

4. Verify Water Supply

Verifying the water supply is crucial when troubleshooting a Whirlpool washing machine that won’t turn on. Water supply issues can render the washer unresponsive, necessitating a systematic approach to diagnose and resolve the problem.

  • Firstly, check for adequate water supply to the washing machine and ensure both hot and cold water valves are fully open.
  • Verify there are no kinks or blockages in the hoses connecting the washer to the main water supply.
  • Inspect the inlet filters for any clogs caused by sediment or mineral deposits.

If no issues are found with valves, hoses, or filters, proceed to clean the filters thoroughly by removing and rinsing them under running water. Reinstall them properly and test the washer to see if the issue persists.

5. Examine Lid Switch

When troubleshooting a Whirlpool washing machine that won’t turn on, one key component to check is the lid switch. The lid switch is crucial for safety, ensuring the washer doesn’t start with the lid open. If it malfunctions, the machine may not respond to power attempts.

Examination Procedure

  • Unplug the washing machine and disconnect the water supply for safety.
  • Locate the lid switch beneath the top panel of the washer.
  • Check for visible damage like cracks or loose connections.

Testing with a Multimeter

  • Use a multimeter to test for continuity in the switch’s electrical circuit.
  • Disconnect wires from the switch and set the multimeter to measure resistance.
  • Touch each probe to a terminal of the switch; there should be continuity when pressing and releasing the actuator button on the lid.

Replacement Consideration

  • If no continuity is detected or signs of malfunction persist, consider replacing the lid switch with a compatible one for your Whirlpool model.

By meticulously examining and testing the lid switch, you can effectively troubleshoot and resolve issues preventing the washing machine from powering on. If uncomfortable with these tasks, seek professional assistance from licensed technicians specializing in Whirlpool appliance maintenance and repair.

6. Test Thermal Fuse

The thermal fuse is crucial in your Whirlpool washing machine, preventing safety hazards by cutting power if it malfunctions, leading to the washer not turning on.

  • When experiencing power supply issues with your washing machine, testing the thermal fuse is essential in troubleshooting.
  • Use a multimeter or continuity tester for testing, ensuring safety by disconnecting the power source first.
  • Locate the thermal fuse near the heating element or control board, and carefully detach wires to access it.
  • Set your multimeter or continuity tester to measure resistance, placing one probe on each end of the thermal fuse.
  • If there’s no continuity (infinite resistance), it indicates a blown thermal fuse that needs replacement.

Replacing a faulty thermal fuse requires caution and precision to ensure proper washer functionality and prevent overheating risks. Refer to your Whirlpool washer repair  manual for accurate replacement instructions. If unsure, seek professional repair assistance for reliable results.

7. Inspect Control Board

Inspecting the control board is crucial when troubleshooting a Whirlpool washing machine that won’t turn on. As the appliance’s brain, it interprets user commands and coordinates functions during cycles.

  • Check Power Supply: Ensure a reliable power source reaches the washing machine by testing the outlet with another device or a multimeter.
  • Inspect Wiring Connections: Examine for loose or damaged wires around the control board, which can disrupt electrical flow.
  • Address Moisture Issues: Look for water damage or corrosion on the control panel caused by leaks or condensation, addressing underlying water supply issues.
  • Consider Error Codes: Evaluate any error codes displayed on the control panel for insights into specific malfunctions, consulting maintenance guides or online resources for solutions.
  • Follow Preventive Measures: Adhere to recommended usage guidelines to prevent overloading and keep the control panel clean to avoid interference with functionality.
  • Exercise Caution with DIY Repairs: While some issues may be DIY-fixable, be cautious to prevent further damage; seek professional assistance if unsure.

Inspecting the control board helps identify potential issues, such as power supply problems or water damage, affecting the washing machine’s startup. Understanding error codes and preventive maintenance measures is key to effectively resolving problems and ensuring proper functionality. Professional assistance is advisable for complex repairs or if unsure about DIY approaches.

8. Professional Assistance

When troubleshooting your Whirlpool washing machine becomes futile, seeking professional assistance is the next step.

Licensed appliance technicians have the expertise, tools, and resources to diagnose and resolve various issues affecting your washer’s power supply.

They are well-versed in common washing machine problems, enabling them to quickly identify the root cause of the issue.

Whether it’s lid switch malfunctions, control board issues, or door latch problems, these specialists can address them effectively.

Professional technicians have access to specialized equipment for meticulous diagnostic testing, ensuring accurate fault detection within your machine’s system.

Entrusting your faulty washer to a licensed technician ensures prompt resolution and prevents further aggravation of the problem through DIY attempts.

Expert appliance repair services also offer maintenance tips to keep your Whirlpool washing machine repair functioning optimally in the long run. If DIY efforts fail and your washer remains unresponsive despite proper checks, it’s time to call upon professional assistance. Their comprehensive knowledge and specialized tools ensure efficient repairs, preserving your washer’s functionality and longevity.

Call a Licensed Appliance Technicians

If troubleshooting your Whirlpool washing machine fails to resolve the issue of it not turning on, seeking professional assistance is advisable. Licensed appliance technicians are equipped to handle complex problems beyond DIY repair, especially when preventive measures have been ineffective.

  • Appliance technicians are well-versed in Whirlpool appliances and can diagnose and fix issues beyond DIY repair.
  • They have access to specialized tools and diagnostic equipment tailored for troubleshooting Whirlpool washers.
  • Professional assistance is crucial for problems like power supply issues, lid switch malfunctions, control board problems, or thermal fuse troubleshooting.

Attempting DIY solutions without proper knowledge can worsen the problem. Professional technicians ensure expert attention to your washer, understanding its intricate workings.

We value your time and effort and are ready to help you repair your Whirlpool washing machines. Whether you are located in Etobicoke, Scarborough, Oshawa, Newmarket or Mississauga we got you covered!

With our licensed appliance repair technicians from Get A Pro you can rest assured we will have the job done in no time, and most importantly – Guaranteed!

For same-day Whirlpool washer repair service, contact us at our toll-free number 1-800-498-4490 or fill out our contact form on our website and our team will get back to you during business hours!


When faced with a Whirlpool washing machine that will not turn on, there are several potential causes and corresponding solutions to consider. Firstly, it is important to check the power supply to ensure there is a proper connection and no electrical issues. If the power supply is functioning correctly, the next step is to examine the door latch.

By following these expert tips and considering common issues such as power supply problems, faulty door latches or lid switches, control panel errors, and water supply concerns – individuals may successfully troubleshoot their machines and restore functionality. Remember that regular maintenance plays an essential role in preventing recurring startup issues in your Whirlpool appliance.

By implementing simple upkeep practices such as cleaning filters, inspecting hoses, and ensuring proper electrical connections, you can prolong the lifespan of your washer and minimize the likelihood of encountering these problems in the future. With a little patience and perseverance, you can once again enjoy the convenience and efficiency of a functioning Whirlpool washing machine.


What are common reasons for a Whirlpool washing machine not turning on?

Typical reasons for a Whirlpool washing machine not turning on include power supply issues, control board malfunctions, and problems with the power button or fuse. Identifying the specific cause is crucial for effective troubleshooting.

Can I troubleshoot and resolve issues with the power supply or controls on my own?

Yes, you can troubleshoot and resolve issues with the power supply or controls on your Whirlpool washing machine. Check for a functioning power outlet, inspect the power cord for damage, and refer to the user manual for guidance on resetting or recalibrating the controls.

Are there DIY solutions for problems related to the washer not responding to the power button?

DIY solutions for problems related to the washer not responding to the power button include checking for a secure power connection, ensuring proper door closure, and examining the control panel for any visible issues. The user manual provides step-by-step instructions for these common troubleshooting steps.

How do I handle issues with the electronic control board or fuse causing power problems?

Handle issues with the electronic control board or fuse causing power problems by inspecting for visible damage, checking connections, and testing the continuity of the fuse. Consult the user manual for specific instructions on addressing problems with these components.

When is it advisable to consult with a professional for Whirlpool washing machine power issues?

Consult with a professional for Whirlpool washing machine power issues when DIY solutions are ineffective, or if there are underlying electrical problems with components like the control board or fuse. Professional technicians have the expertise to diagnose and repair complex power-related issues.

Share This Article

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top
Open chat
Scan the code
Get A Pro Chat *LIVE Agent*
Thank you for contacting Get A Pro! In a few words, let us know how we can help you. Please allow us 90 seconds to connect you to our live team member.